Catcher; Mulcher Insert; Rear Discharging - Husqvarna LC 247 Operator's Manual
Hide thumbs
Also See for LC 247:
- Operator's manual (460 pages) ,
- Workshop manual (20 pages) ,
- Operator's manual (15 pages)
Table of Contents
Advertisement
Available languages
Available languages
•
Move the lever to the back for lower cutting height and
to the front for higher cutting height.
•
The cutting height can be adjusted to 6 different
positions with the cutting height lever.
Catcher
•
The collector's handle situated on the frame must be
placed over the collector bag.
•
Fasten the lower part of the frame in the groove
underneath the collector.
•
Secure the frame by using the quick-action clips.
76 – English
ASSEMBLING AND ADJUSTMENTS
•
Make sure the machine's discharge deck is clean and
free from grass cuttings.
•
Hook the collector onto the top edge of the chassis.
•
Place the collector tongue in the machine's discharge
deck.
•
Fit the bagger bottom in the discharge hole.
Mulcher insert - Accessories
A mulching-kit is available as an accessory, to make the
machines equipped with a catcher able to be used with
mulching function. The kit contains of a mulch plug and a
blade.
•
Raise the discharge guard to mount / dismount the
mulch plug.
•
Replace the blade with the supplied Combi blade. For
more information, see "Cutting equipment".
Rear discharging
The machine can also be used without the mulcher insert
and collector.
•
Lift up the back shield and remove the catcher.
•
Remove the mulch plug.
•
Close the shield.
- Quick Links:
- Oljebyte
Hide quick links:
Advertisement
Chapters
Table of Contents
