Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2017 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
17f
Advertisement
Table of Contents
Related Manuals for Harbor Freight Tools EarthquakeXT EQ38XT-20V
Summary of Contents for Harbor Freight Tools EarthquakeXT EQ38XT-20V
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
-
Page 2: Table Of Contents
Table of contents Safety ............2 Maintenance ..........10 Specifications ..........7 Parts Lists and Diagrams ......12 Setup ............7 Warranty ............ 16 Operation ............ 8 WARNING SyMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. -
Page 3: Electrical Safety
Electrical Safety Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. personal Safety 1. Stay alert, watch what you are doing 4. Remove any adjusting key or wrench and use common sense when operating before turning the power tool on. - Page 4 9. This product is not a toy. If unreadable or missing, contact Keep it out of reach of children. Harbor Freight Tools for a replacement. 10. People with pacemakers should consult their 4. Avoid unintentional starting. physician(s) before use. Electromagnetic fields in Prepare to begin work before turning on the tool.
-
Page 5: Vibration Safety
Lithium Battery Safety Warnings LITHIUM BATTERIES STORE A LARGE AMOUNT OF ENERGy AND WILL VENT FIRE OR EXpLODE IF MISTREATED: 1. Keep Battery pack dry. e. Incinerate, or f. Expose to temperatures greater than 140°F. 2. DO NOT DO ANy OF THE FOLLOWING TO THE BATTERy pAcK: 3. -
Page 6: Extension Cords
Grounding TO pREVENT ELEcTRIc SHOcK AND DEATH FROM INcORREcT GROUNDING: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged. -
Page 7: Specifications
Specifications Battery Rating 20 V / 4.0 A h Battery Type Li-ion 63536: 0 – 3 000 IPM Impact Rate 63852: 0 – 2 200 IPM 63536: 3/8" Anvil Size 63852: 1/2" Setup - Before Use: Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. -
Page 8: Operation
Operating Instructions Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Make sure that the Trigger is in the off-position and remove the Battery pack before performing any procedure in this section. -
Page 9: General Operating Instructions
General Operating Instructions 1. Make sure that the Trigger is in the off-position NOTIcE: Do not change direction of rotation and the Direction Switch is in the centered, Trigger while Anvil is rotating. Wait until Anvil has come Lock position, then attach the Battery Pack. to a complete stop before changing direction. -
Page 10: Maintenance
Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. T O pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Make sure that the Trigger is in the off-position and remove the Battery pack before performing any procedure in this section. TO pREVENT SERIOUS INJURy FROM TOOL FAILURE: Do not use damaged equipment. -
Page 11: Troubleshooting
Troubleshooting problem possible causes Likely Solutions Tool will 1. Battery Pack not properly 1. Remove Battery Pack, make sure there are not start. connected. no obstructions, clean battery contacts on tool, reinsert the Battery Pack according to its shape (it should only fit one way), and press firmly until the Battery Pack locks in place. -
Page 12: Parts Lists And Diagrams
pLEASE READ THE FOLLOWING cAREFULLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. - Page 13 63536 Assembly Diagram Item 63536 63852 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Parts List
63852 parts List part Description part Description Enclosure Spindle Direction Switch Steel Ball Panel Planet Gear LED Cover Shaft Screw Washer Screw Ball Bearing Soft Pad Washer Front Cover Armature Washer Stator Assembly Needle Roller Bearing Carbon Brush Base Anvil Pinion Gear Steel Ball Thermal Shrink Tube... - Page 15 63852 Assembly Diagram Item 63536 63852 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.