Table of Contents
Advertisement
Quick Links
18 VOLT CORDLESS DRILL
Distributed exclusively by Harbor Freight Tools
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS mANUAL.
Copyright
2007 by Harbor Freight Tools
©
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements,
actual product may differ slightly from the product described herein. Tools required for assembly and service
may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
REV 11h
OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
. All rights reserved. No portion of this manual or any artwork
®
65930
.
®
Advertisement
Table of Contents
Related Manuals for Harbor Freight Tools 65930
Summary of Contents for Harbor Freight Tools 65930
-
Page 1: Operating Instructions
18 VOLT CORDLESS DRILL OPERATING INSTRUCTIONS Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. -
Page 2: Product Specifications
Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. For technical questions, please call 1-800-444-3353. SKU 65930 18 VDC, 1.3 Ah, NiCd Battery 5 hours (Initial) -
Page 3: Electrical Safety
Do not overreach. Keep proper footing and balance at all times. and balance enables better control of the power tool in unexpected situations. For technical questions, please call 1-800-444-3353. SKU 65930 Electrical Safety eliminates the need for the three wire grounded... - Page 4 When servicing a tool, use only identical replacement parts. Follow instructions in this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. For technical questions, please call 1-800-444-3353. SKU 65930 Tool Use and Care Service Dust mask, nonskid safety...
-
Page 5: Specific Safety Rules
Do not use this product in a damp or wet location. maintain labels and nameplates on the Cordless Drill. information. If unreadable or missing, contact Harbor Freight Tools for a replacement. When using the Cordless Drill, always maintain a firm grip on the tool with both hands. -
Page 6: Grounded Tools: Tools With Three Prong Plugs
Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (Se Figure A.) FIGURE A For technical questions, please call 1-800-444-3353. SKU 65930 GROUNDING WARNING! FIGURE B. PAGE 6... -
Page 7: Double Insulated Tools: Tools With Two Prong Plugs
Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Figure B.) n 0 xxxx/min. For technical questions, please call 1-800-444-3353. SKU 65930 SymBOLOGy Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. - Page 8 UNPACKING When unpacking, check to make sure that the product is complete and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
- Page 9 Depress both buttons at the rear of each side of the Battery Pack and slide unit back to detach from the Drill. Plug Battery Pack into Adapter (30) the same way it plugs into the Cordless Drill, then slide Adapter onto Charger (29), and plug the Charger into the nearest 120 volt, grounded, electrical outlet.
- Page 10 The different numbers on the Ring are an indication of how much torque the screwdriver will apply to the bit before the clutch slips, allowing the bit to stop and For technical questions, please call 1-800-444-3353. SKU 65930 Figure E. Rotation Button (9)
- Page 11 Reverse Indicator (21) lights up, when the Trigger is depressed, to show which direction the Drill is set. Make sure to hold the Cordless Drill firmly with both hands, as torque from the Motor can cause the tool to twist.
-
Page 12: Inspection, Maintenance, And Cleaning
Bit breaks through the workpiece. When you have drilled the hole, remove the Bit from the hole while the Cordless Drill is still running. This prevents the Bit from getting caught in the hole and causing damage. -
Page 13: Parts List
Left Shell Rotation Button Trigger R/R Indicator PCB Magnesium Shell Screw Accessory Grip Torque Setting Ring For technical questions, please call 1-800-444-3353. SKU 65930 PARTS LIST Part Chuck (13mm) Screw Gear Assembly Motor Right Shell Cover Forward/Reverse Indicators 1 Level Vial... -
Page 14: Please Read The Following Carefully
PARTS THERETO. 90 DAy WARRANTy Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.