Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fujitsu LIFEBOOK U938
Summary of Contents for Fujitsu LIFEBOOK U938
- Page 1 System Operating Manual FUJITSU LIFEBOOK U938...
- Page 2 Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
- Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2018. All rights reserved. Publication Date 03/2018 Order No.: A26391-K477-Z320-1-7619, edition 1...
- Page 5 FUJITSU LIFEBOOK U938 Operating Manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes...
- Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
-
Page 7: Table Of Contents
Switching the wireless components on and off ......... 37 Fujitsu... - Page 8 The notebook’s date or time is incorrect ........... 62 When certain characters are entered on the keyboard, only numerals are written ... . . 62 Fujitsu...
- Page 9 Index ................. . 72 Fujitsu...
- Page 10 Contents Fujitsu...
-
Page 11: Innovative Technology
The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used. -
Page 12: Notational Conventions
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:... -
Page 13: Ports And Controls
Front 1 = Microphone 6 = Fingerprint recognition (optional) or palm vein recognition (optional) 2 = Webcam 7 = Touchpad 3 = Webcam LED 8 = Touchpad buttons 4 = Status indicators 5 = ON/OFF button Fujitsu... - Page 14 (USB Type-C) 6 = SmartCard reader Right side 1 = Slot for SIM cards (optional) 4 = LAN connector (removable) 2 = Slot for memory cards 5 = Security lock device 3 = USB 3.1 Gen1 port (USB Type-A) Fujitsu...
- Page 15 Ports and controls Bottom 1 = Loudspeaker 2 = On/off button for battery (recessed) Fujitsu...
-
Page 16: Important Notes
(e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu... -
Page 17: Energy Saving
You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment. Energy saving under Windows ► Make use of the power management features (see ""Using the power-management features", Page 32"). Fujitsu... -
Page 18: Travelling With Your Notebook
► Unplug the mains adapter and all external devices from the power socket. ► Disconnect the mains adapter cable and the data cables for all external devices. ► Close the LCD screen. ► To protect against damaging jolts and bumps, use a notebook carrying case to transport your notebook. Fujitsu... -
Page 19: Cleaning The Notebook
The surface may be cleaned with a dry cloth. If particularly dirty, use a damp cloth that has been dipped in water mixed with mild domestic detergent and then carefully wrung out. To clean the keyboard and the Touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu... -
Page 20: First-Time Setup Of Your Device
► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu... -
Page 21: Selecting A Location
► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu... -
Page 22: Switching On The Device For The First Time
If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com". -
Page 23: Working With The Notebook
Please refer to the notes in "Important notes", Page Status indicators Statusindicators The status indicators provide information about the status of the power supply, the hard disk and the keyboard functions. Fujitsu... - Page 24 "Function keys and key combinations", Page 24). Num Lock indicator Indicator Num Lock Indicator is illuminated: The key has been pressed. The virtual numerical keypad is activated. You can output the characters indicated on the upper right of the keys. Fujitsu...
-
Page 25: Switching On The Notebook
Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook does not switch itself off automatically, press the ON/OFF button for about five seconds. ► Close the LCD screen. Fujitsu... -
Page 26: Keyboard
The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu... -
Page 27: Key Description
The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor control Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu... -
Page 28: Virtual Numeric Keypad
► While holding the first key down, press the other key or keys in the combination. If the key combination is pressed: Instead of the imprinted standard functions of the function keys, the Fn functions can be executed by pressing the keys directly. Fujitsu... - Page 29 This function key takes a screenshot of the current screen display and saves it to the clipboard. Num Lock This function key activates the virtual number block. The characters found on the upper right of the keys are then output. Fujitsu...
-
Page 30: Country And Keyboard Settings
In addition, the following non-labelled key combinations are supported: • = Pause • = Break • = SysRq Country and keyboard settings ► Change the country and keyboard settings as described in the documentation for your operating system. Fujitsu... -
Page 31: Touchpad And Touchpad Buttons
► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu... -
Page 32: Dragging Items
LCDscreen Notes High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a certain resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear picture. -
Page 33: Using Fingers
fingers together. Input fields Data must be entered for some apps, for instance an Internet page or your name and password. ► Tap on the input field. An on-screen keyboard opens, with which you can enter your data. Fujitsu... -
Page 34: Webcam
LCD screen may flicker while the light level is adjusted. Further information on using the webcam and on the additional settings which are possible for your webcam can be found in the help function of the program which uses the webcam. Fujitsu... -
Page 35: Rechargeable Battery
The device is currentless. Switch on the battery ► Connect the device to the mains adapter of the notebook or to the Port Replicator. ► Switch the device on again. Fujitsu... -
Page 36: Using The Power-Management Features
If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu... -
Page 37: Memory Cards
In order to protect your data, always follow the correct procedure for removing the card (see the documentation for your operating system). ► Press on the memory card (1). Memory card The memory card is released and can now be removed. ► Pull the memory card out of the slot (2). Fujitsu... -
Page 38: Loudspeakers And Microphones
When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu... -
Page 39: Sim Card
SIM card fully home into the slot as shown. The contacts point upwards. The SIM card does not latch into place. ► Close the cover of the SIM card slot (2). ► Switch the battery on again (see "Switch the battery off and on", Page 31 Fujitsu... -
Page 40: Removing A Sim Card
SIM card (2). ► Push the SIM card holder into the SIM card slot (1) and close the cover of the SIM card slot (2). ► Switch the battery on again (see chapter "Switch the battery off and on", Page 31 Fujitsu... -
Page 41: Wireless Components Lan / Bluetooth / Lte (Optional)
Working with the notebook Wireless components LAN / Bluetooth / LTE (optional) The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off ► Press the key with the radio symbol to switch the wireless components on and off (flight... -
Page 42: Ethernet And Lan
Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Use a shielded network cable (CAT 5e). Fujitsu... -
Page 43: Your Usb Type-C Port Replicator (Optional)
10 = USB 3.1 Gen1 port for data connection and power supply for the notebook 4 = HDMI port (USB Type-C) 5 = DisplayPort 6 = LAN port 7 = USB 3.1 Gen1 port only for data connection (USB Type-C) Fujitsu... -
Page 44: Setting Up The Port Replicator
"Docked" mode. In this profile, for example, the setting is saved as to which monitor was last used for output. This profile will be loaded, as soon as the notebook is connected to a Port Replicator of the same type. Fujitsu... -
Page 45: Connect The Notebook To The Port Replicator
► Connect one end of the USB cable (USB Type-C) to the USB 3.1 Gen1 port with charging function (USB Type-C) on the notebook (1). ► Connect the other end of the USB cable (USB Type-C) to the USB 3.1 Gen1 port for data connection and power supply (USB Type-C) on the Port Replicator (2). Fujitsu... -
Page 46: Switching On The Notebook Via The Port Replicator
The notebook will switch itself off. Any unsaved data may however be lost. Disconnecting the notebook from the Port Replicator ► Disconnect the supplied USB cable (USB Type-C) from the USB 3.1 Gen 1 port (USB Type-C) of the notebook. Fujitsu... -
Page 47: Security Functions
► You must install the fingerprint software in order to be able to use the fingerprint sensor (1). The current Workplace Protect software for palm and fingerprint sensors can be found on the Internet at "http://www.fujitsu.com/fts/solutions/business-technology/security/secure/index.html". Fujitsu... -
Page 48: Configuring The Palm Vein Sensor
Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook. -
Page 49: Configuring Password Protection In Bios Setup Utility
The notebook is then rebooted and the new password comes into effect. It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Fujitsu... -
Page 50: Password Protection For Booting Of The Operating System
► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The notebook will reboot. The system is no longer password-protected. Fujitsu... -
Page 51: Password Protection For The Hard Disk
If a supervisor password has been assigned, a password for the hard disk can also be set in the Hard Disk Security menu. The hard disk is protected by this password. Data on this hard disk can only be read into another system if the correct password has been entered. Fujitsu... -
Page 52: Trusted Platform Module (Tpm) (Device-Dependent)
► Select the "Security Chip" "Disabled" entry to deactivate the TPM ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu... -
Page 53: Smartcard Reader
SmartCard with you. In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard. -
Page 54: Connecting External Devices
LCD TV or a plasma TV with an HDMI connection. ► Connect the data cable to the external device. ► Connect the data cable to the HDMI port on the notebook or on the optional Port Replicator. Fujitsu... -
Page 55: Connecting An External Monitor To The Port Replicator
You can also switch between the external monitor and the LCD monitor of the notebook, see chapter "Function keys and key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. Fujitsu... -
Page 56: Connecting Usb Devices
Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu... -
Page 57: Usb Connection With Charging Function (Usb Type-C)
USB devices while the system is running. Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port (USB Type-C) of the notebook. Fujitsu... -
Page 58: Usb Port With Charging Function (Anytime Usb Charge)
► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu... -
Page 59: Headset Port
If you buy a cable from a retailer, please note the following information: The headset port on your notebook is a "3.5 mm jack socket". If you want to connect a headset, headphones or loudspeakers, you will need a "3.5 mm jack plug". Fujitsu... -
Page 60: Removing And Installing Components During Servicing
Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty. Servicing Components Fujitsu... -
Page 61: Settings In Bios Setup Utility
► Press the function key ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. Fujitsu... -
Page 62: Operating Bios Setup Utility
► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu... -
Page 63: Exiting Bios Setup Utility
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu... -
Page 64: Troubleshooting And Tips
PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"... -
Page 65: Reset By Switching Off The Battery
► Insert the "Drivers & Utilities" CD/DVD into the optical drive. The CD starts automatically. ► Click on the Desk Update button. ► Select Automatic driver installation (Express) and click on Start installation. ► Follow the instructions on the screen. ► Restart your notebook when the driver installation is completed. Fujitsu... -
Page 66: The Notebook's Date Or Time Is Incorrect
► Press the key to switch screen output, see "Function keys and key combinations", Page The LCD screen is difficult to read LCDscreen LCDscreen Cause Troubleshooting Reflected glare ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen. Fujitsu... -
Page 67: The External Monitor Remains Blank
Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu... -
Page 68: The Notebook Cannot Be Started
The printer driver is faulty or not correctly ► Check that the data cable connecting installed, or it is the wrong printer driver. the notebook to the printer is properly connected. ► Check whether the correct printer driver is loaded (refer to the printer documentation). Fujitsu... -
Page 69: The Wireless Connection To A Network Does Not Work
Supervisor PIN. SmartCard lost Cause Troubleshooting SmartCard lost ► If you are working in a network, contact your system administrator, who can boot up your notebook with a Supervisor SmartCard. Fujitsu... -
Page 70: Error Messages On The Screen
Press <F1> to resume, <F2> to SETUP operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating system. BIOS Setup. Fujitsu... - Page 71 System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...
-
Page 72: Technical Data
The data sheet for the device provides further technical data. You can find the data sheet on your device or you can download it from the Internet at "http://www.fujitsu.com.fts/support/". Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com.fts/support/". -
Page 73: Mains Adapter
HDMI or Display Port: 4096 x 2160 pixels LAN port RJ45 USB (Universal Serial Bus) 3 x USB 3.1 Gen 1, 2 x USB Type-C Microphone port / Line In / headphones port 3.5 mm stereo mini jack / Line Out Fujitsu... -
Page 74: Mains Adapter For Use With The Notebook And Port Replicator
Max. rated current 0.7 A to 1.2 A Secondary Nominal power 65 W / 90 W Rated voltage 19 V Max. rated current 3.42 A / 4.74 A An additional mains adapter or power cable can be ordered at any time. Fujitsu... -
Page 75: Manufacturer's Notes
Manufacturer’s notes Manufacturer’s notes Disposal and recycling Notes You can find information on this subject on your notebook or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Certification markings Certification markings Certification markings are listed as applicable in the "Manual Appendix - Additional Certifications" supplement. -
Page 76: Index
Configuration, BIOS Setup Utility 57 correction 60 Connecting audio devices 55 Fingerprint sensor 43 Connecting headphones 55 configure 43 Crystal View display First-time setup cleaning 15 Fn key 23 Ctrl+Alt+Del 26 Cursor control 23 Cursor keys 23 Getting started 16 Fujitsu... - Page 77 33 Port Replicator 39 removing 33 Power Microphone 34 power consumption 32 Mobile operation 14 power-management features 32 Monitor Power-on indicator 20 connecting 51 Preparing for operation 17 drifting display 63 Printer does not print 64 remains blank 63 Fujitsu...
- Page 78 Technical data 68 Switching the module off 37 Mains adapter 69 Switching the module on 37 notebook 68 Wireless LAN: The wireless connection to a network safety notes 12 does not work 65 Time not correct 62 Tips 60 Fujitsu...