IBM Storwize V5010 Manual page 721

Implementing the ibm storwize v5000 gen2 with ibm spectrum virtualize v8.1

Hide thumbs Also See for Storwize V5010:

Table of Contents

9. Open the Service Assistant Tool for the node that you removed. Enter the Service IP

Address followed by /service into a browser window. Without /service the browser opens

the associated GUI to this service IP. No HTTP:// or HTTPS:// is needed.

Example: 172.163.18.34/service

10.In the Service Assistant Tool, ensure that the node that is ready for update is selected.

The node can be in the Service status, display a 690 error, and show no available cluster

information, as shown in Figure 12-52.

Figure 12-52 Node to update in the Service Assistant Tool

11.In the Service Assistant Tool, select Update Manually, and choose the required node

canister software upgrade file, as shown in Figure 12-53.

Figure 12-53 Starting the update in the Service Assistant Tool

12.Click Update to start the update process on the first node and wait for the node to finish

Non-configuration nodes can be reintroduced automatically into the system after the

update finishes. Updating and adding the node again can last 20 - 40 minutes.

Chapter 12. RAS, monitoring, and troubleshooting

Show Quick Links

Table of Contents

Troubleshooting

Storwize v5020 Storwize v5030