Enjoying The Tv Sound From The Speakers Connected To The Receiver (System Audio Control) - Sony STR-DN2010 Manual de instrucciones Operating Instructions Manual
Multi channel av receiver
Hide thumbs
Also See for STR-DN2010 Manual de instrucciones:
- Manual de instrucciones (164 pages) ,
- Operating instructions manual (152 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Enjoying the TV sound
from the speakers
connected to the receiver
(System Audio Control)
You can enjoy the TV sound from the speakers
connected to the receiver by a simple
operation.
You can operate System Audio Control
function using the TV menu. For details, refer
to the operating instructions of the TV.
TV
Sets System
Audio Control
to on
Minimizes TV
volume
You can also use the System Audio Control
function as follows.
• If you turn on the receiver while the TV is
turned on, the System Audio Control
function will automatically be set to on and
the TV sound will output from the speakers
connected to the receiver. However, if you
turn off the receiver, the sound will output
from the TV speakers.
• When you adjust the TV volume, the
receiver's volume is adjusted
simultaneously.
GB
92
Receiver
• Turns on (if in
standby mode)
• Switches to
appropriate
HDMI input
Outputs TV
sound
Notes
• If System Audio Control does not function
according to your TV setting, refer to the operating
instructions of the TV.
• When "Control for HDMI" is set to "ON", the
"Audio Out" settings in the HDMI Settings menu
will set automatically depending on the System
Audio Control settings.
• When you connect a TV that does not have System
Audio Control function, the System Audio Control
function does not work.
• If the TV is turned on before turning on the
receiver, the TV sound will not be output for a
moment.
Advertisement
Table of Contents
