Antenna Parameter Assignment - Siemens SIMATIC RF600 System Manual
Hide thumbs
Also See for SIMATIC RF600:
- System manual (490 pages) ,
- Configuration manual (294 pages) ,
- Compact operating instructions (3 pages)
Table of Contents
Advertisement
Cable designa-
tion
Antenna cable
Antenna cable
Permissible minimum bending radius with one-time bending. 28 mm
1)
With cables capable of being used in drag chains, 100,000 bending cycles at a bending radius of
2)
100 mm and a bend of ± 180° or 3 million torsion cycles with a bend of ± 180° on a cable length of
1 m are permitted.
6.8.5
Antenna parameter assignment
Depending on the country or region in which the antenna is being operated, it is subject to
regional limitations with respect to the radiated power.
Limitations in the EU, EFTA, or Turkey
Note
Limitation of the radiated power according to EN 302 208 V1.4.1 (ETSI)
RF600 systems that are put into operation in the EU, EFTA or Turkey must not exceed the
following radiated power with an RF680A antenna:
• 2000 mW ERP (or 33 dBm ERP)
Converted into EIRP: 3250 mW EIRP (or 35 dBm EIRP)
Make the following settings to ensure that the maximum permitted radiated power of the
antenna is not exceeded:
● Antenna gain: 3.5 dBi (6.5 dBic)
● Radiated power: ≤ 2000 mW ERP (or 33 dBm ERP)
Converted into EIRP: ≤ 3250 mW EIRP (or 35 dBm EIRP)
● Use of cable loss associated with the antenna cable.
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
Article number
Length [m]
6GT2815-0BN20
20
6GT2815-0BN40
40
6.8 SIMATIC RF680A
Cable loss [dB]
Bending radius
[mm]
4
77
5
77
Antennas
343
Advertisement
Table of Contents
