Removing A Memory Module - Toshiba 2400 User Manual
Toshiba notebook user's guide 2400, 2405
Hide thumbs
Also See for 2400:
- User manual (240 pages) ,
- User manual (232 pages) ,
- Replacement manual (24 pages)
Table of Contents
Advertisement
52
Getting Started
Installing additional memory (optional)
Removing a memory module
CAUTION: If you use the computer for a long time, the memory
modules will become hot. If this happens, let the modules cool to
room temperature before you replace them.
1
Follow steps 1 through 6 in
memory (optional)" on page
CAUTIONS: Do not try to remove a memory module with the
computer turned on. You can damage the computer and the
device.
Do not remove the memory module while the computer is in
Standby mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the above
cases, the Standby configuration will not be saved.
The following message appears when you turn on the power:
Warning: Resume Failure
Press Any Key To Continue
If the computer hangs up when you turn it on, perform the
following: Press the power button and hold it down for five
seconds, then turn the power on again.
2
Push the latches to the outside to release the module. A
spring will force one end of the module up.
3
Gently pull the module out.
CAUTION: Avoid touching the connectors on the memory module
or on the computer. Grease or dust on the connectors may cause
memory access problems.
"Installing additional
47.
- Quick Links:
- Fcc Notice
Hide quick links:
Advertisement
Table of Contents
