Table of Contents
Advertisement
Replacing the wireless card
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
CAUTION: To avoid damaging the wireless card, do not place any cables under it.
1. Align the notch on the wireless card with the tab on the wireless-card slot.
2. Slide the wireless card at an angle into the wireless-card slot.
3. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Table 3. Antenna-cable color scheme
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
4. Place the wireless-card bracket on the wireless card.
5. Replace the screw that secures the wireless card to the system board.
1. wireless card
3. tab
5. screw
computer. After working inside your computer, follow the instructions in
Antenna-cable color
White
Black
2. notch
4. antenna cables
6. wireless-card bracket
After working
www.dell.com/
67
Hide quick links:
Advertisement
Table of Contents
