Page 1 Tecra ® User’s Guide If you need assistance: ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see guide. Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 2 DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM. WHEN COPYING OR TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED.
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this computer. Operation with non-compliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used...
Page 4: Industry Canada Requirement
Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Instructions for IC CS-03 Certified Equipment NOTICE: The Industry Canada label identifies certified equipment.
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Regulatory Information
Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence. Europe – EU Declaration of Conformity ❖ This device complies with the essential requirements of the R&TTE Directive 1999/5/EC with essential test suites as per standards: EN 60950 Safety of Information Technology equipment ETS 300 328 Technical requirements for radio equipment...
Page 10 This device must accept any interference that may cause undesired operation. TOSHIBA is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this TOSHIBA Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by TOSHIBA.
Page 11 Caution: Exposure to Radio Frequency Radiation The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. The both of antenna types, when installed are located at the upper edge of the LCD screen.
Page 12 Article 17 Any use of low power radio frequency electric machinery shall not affect the aviation safety and interfere with legal communications. In event that any interference is found, the use of such electric machinery shall be stopped immediately, and reusing of such products can be resumed until no interference occurs after improvement.
Page 13: Device Authorization
It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916 Fax: 03-5444-9450 Device Authorization This device obtains the Technical Regulation Conformity Certification and...
Page 14 ❖ Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by Toshiba.
Page 15 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 16: Bluetooth Wireless Technology Interoperability
New Zealand Portugal Sweden Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖...
Page 17: Bluetooth Wireless Technology And Your Health
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for...
Page 18: Regulatory Statements
In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: ❖ Using the equipment with Bluetooth wireless technology on board of airplanes, or ❖...
Page 19 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 20 The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations. Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery. Using this equipment in Japan In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second generation low-power data communication systems such as this...
Page 21 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916 Fax: 03-5444-9450 Device Authorization This device obtains the Technical Regulation Conformity Certification, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law of Japan.
Page 22 This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 23 DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES, WHETHER BASED ON TORT, CONTRACT OR...
Page 24 Computer Disposal Information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org.
Page 25: Table Of Contents
Contents Introduction ...34 Chapter 1: Finding Your Way Around... 38 Making sure you have everything...38 Finding where everything is located ...38 Front with the display panel closed ...39 Back ...40 Left side ...41 Right side...42 Front with the display panel open ...43 Underside ...45 Indicator panel lights...46 System indicator panel lights...46...
Page 26 Turning on the computer...58 Opening the display panel ...58 Turning on the power...59 Setting up your software ...60 Registering your computer with Toshiba...61 Setting up other devices ...61 Turning off the computer ...62 Closing the display panel ...63 Chapter 3: Connecting Other External Devices... 64 Using external display devices ...64...
Page 27 Using the AccuPoint II pointing device...94 Using the TouchPad™ ...95 Control buttons ...96 Disabling or enabling the Dual Pointing Device...96 Using TOSHIBA Console ...97 Starting a program ...98 Starting a program from the Start menu...98 Starting a program from Windows Starting a program from the Run dialog box ...100...
Page 28 Powering down the computer ...113 Using Turn Off or Shut down ...114 Using Hibernation ...117 Using Standby ...119 Chapter 5: Mobile Computing... 123 Toshiba’s energy-saver design...123 Running the computer on battery power...123 Battery Notice ...124 Charging the batteries...124 Charging the RTC battery...125 Monitoring battery power ...126...
Page 29 The World Wide Web ...152 Internet Service Providers...152 Connecting to the Internet ...153 Surfing the Internet...153 Internet features...154 Uploading and downloading files from the Internet Chapter 7: Toshiba Utilities... 156 Hotkey Utility...157 TOSHIBA Console ...157 TOSHIBA Accessibility...159 Fn-esse Starting Fn-esse ...160 Using the keyboard or pointing device to assign keys ...162...
Page 30 Contents Changing or removing existing key assignments ...164 Toshiba HW Setup ...164 Accessing Toshiba HW Setup ...164 Power Saver ...167 Mobile Extension...168 Chapter 8: Keeping Your Files Safe... 170 Using passwords in Windows ...170 User-level passwords ...171 Setting a user-level password ...171 Using an instant password...172...
Page 31 Developing good computing habits...209 If you need further assistance ...210 Before you call ...210 Contacting Toshiba ...211 Other Toshiba Internet Web sites ...212 Toshiba’s worldwide offices ...212 Appendix A: Windows 2000 Supplemental Information ... 216 Using your computer for the first time...216 Setting up your software...216...
Page 32 Using Standby...234 Going into Standby mode more quickly ...235 Starting again from Standby ...236 Quickly changing your Shut down mode ...236 Toshiba Utilities...237 Toshiba Hardware Setup...237 Appendix B: Hot Keys... 240 Volume Mute...240 Instant password security ...240 Without a password ...241 With a password ...241...
Page 33 Appendix C: Using ConfigFree™ with your Toshiba Computer... 247 Getting Started ...248 ConfigFree Main Screen ...248 Starting ConfigFree ...249 Configuring ConfigFree ...249 ConfigFree Utilities ...250 Connectivity Doctor ...250 Device Settings ...251 Profile Settings ...253 Quick Connect...254 Using Auto Switch...255 Auto Switch (Cable Disconnect)...256 Auto Switch (SSID)...256...
Page 34: Introduction
You will find your operating system, Microsoft XP, already installed on your computer. Your operating system offers exciting features and easy Internet access. While Toshiba has made every effort at the time of publication NOTE to ensure the accuracy of the information provided herein,...
Page 35: This Guide
This guide This user’s guide contains basic information about your computer, including troubleshooting advice, detailed descriptions of your computer’s hardware and how to use it, and vital notes about Microsoft Depending on your needs, you can: ❖ Read the entire guide from beginning to end. ❖...
Page 36: Other Icons Used
Introduction Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Indicates a potentially hazardous situation which, if not avoided, may result in property damage. Provides important information. NOTE Other icons used Additional icons highlight other helpful or educational information: TECHNICAL NOTE: This icon highlights technical information about the unit.
Page 37: Other Documentation
❖ The Microsoft documentation which explains the features of the operating system. Service options Toshiba offers a full line of service options built around its SelectServ ™ warranty and service material included with your computer for registration information. If you have a problem or need to contact Toshiba, see need further assistance”...
Page 38: Chapter 1: Finding Your Way Around
If any items are missing or damaged, contact your authorized Toshiba representative or your network administrator. Finding where everything is located The next few pages take you on a guided tour of your computer.
Page 39: Front With The Display Panel Closed
Front with the display panel closed Wireless antenna on/off switch* Headphone jack Microphone jack Infrared port—The fast infrared port allows cable-free communication with another device, such as a computer or printer, that has a compatible infrared port. Wireless antenna on/off switch—The Wireless antenna on/ off switch turns the optional wireless communication system on or off.
Page 40: Back
Finding Your Way Around Finding where everything is located Back RGB (monitor) port USB 2.0 ports PS/2 port Parallel port USB ports—Use the Universal Serial Bus 2.0 (USB) ports to connect USB peripherals. DEFINITION: USB 2.0 is a peripheral expansion standard that supports a data transfer rate of up to 480 Mbps for peripherals such as keyboards and pointing devices.
Page 41: Left Side
Modem port—Lets you connect the computer’s internal modem directly to a conventional telephone line. Left side Speaker Cooling Vents PC card slots Speaker—Lets you hear stereo sound from a CD or DVD, in addition to system alarms and audible warnings associated with your software.
Page 42: Right Side
Finding Your Way Around Finding where everything is located Cooling vent—Provides ventilation to keep the computer’s processor from overheating. The vent lets the processor continue performing at its maximum speed. To prevent possible overheating of the computer’s processor, make sure you do not block the cooling vent. Right side Speaker—Lets you hear stereo sound from a CD or DVD in addition to system alarms and audible warnings associated...
Page 43: Front With The Display Panel Open
USB port—Use the Universal Serial Bus 2.0 (USB) ports to connect USB peripherals. DEFINITION: USB 2.0 is a peripheral expansion standard that supports a data transfer rate of up to 480 Mbps for peripherals such as keyboards and pointing devices. USB peripherals have a single standard for cables and connectors.
Page 44 Finding Your Way Around Finding where everything is located Power button Speaker CapsLock indicator AccuPoint II pointing device Wireless antenna switch Power button —The power button is used to turn on power to the computer. For more information, see computer” on page Screen—The computer’s screen is a liquid crystal display (LCD) that provides clear, sharp images.
Page 45: Underside
remove your hands from the keyboard. See software” on page TouchPad—The small, smooth square cutout located in front of the keyboard is sensitive to touch and enables you to move the cursor with the stroke of a finger. Simply move your finger on the TouchPad in the direction you’d like to move the cursor.
Page 46: Indicator Panel Lights
Finding Your Way Around Indicator panel lights information about using the battery, see on page 123. Slim SelectBay release—Keeps the Slim SelectBay module secure in its compartment. Memory module cover—Lets you add more memory to your computer. For more information, see on page Slim SelectBay slot—One of several interchangeable devices which offer exceptional system flexibility.
Page 47: Keyboard Indicator Panel Lights
❖ May flash amber if the computer is overheating. Main battery light—Indicates the status of the main battery. ❖ Flashes amber when you are running on battery power and the battery charge is running low. ❖ Does not glow when you are running on battery power and the battery charge is not running low.
Page 48 Finding Your Way Around Indicator panel lights Cursor control light—Glows when the cursor control overlay is on. When this light is on, pressing an overlay key moves the cursor as shown by the white arrow or command printed on the left front of the key instead of the letter printed on the top of the key.
Page 49: Chapter 2: Getting Started
Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your computer. Selecting a place to work Your computer is designed to be used in a variety of locations and situations.
Page 50: Keeping Yourself Comfortable
AC power source, and let it dry out completely before turning it on again. If the computer does not operate correctly after you turn it back on, contact a Toshiba Authorized Service Provider. ❖ Equipment that generates a strong electromagnetic field, such as large stereo speakers (other than speakers that are connected to the computer) or speakerphones.
Page 51 This section provides hints on avoiding strain and stress injuries. For more information, consult books on ergonomics, repetitive-motion injury, and repetitive-stress syndrome. Placement of the computer Proper placement of the computer and external devices is important to avoid stress-related injuries. Consider the following when placing your computer.
Page 52 Getting Started Selecting a place to work Below eye level Footrest Correct posture and positioning of the computer ❖ Position your chair so that the keyboard is at or slightly below the level of your elbow. You should be able to type comfortably with your shoulders relaxed and your forearms parallel to the floor.
Page 53: Other Precautions
❖ Avoid placing your computer in front of a bright light that shines directly into your eyes. ❖ If possible, use soft, indirect lighting in your computer work area. Arms and wrists ❖ Avoid bending, arching, or twisting your wrists. Keep them in a relaxed, neutral position while typing.
Page 54: Setting Up Your Computer
Getting Started Other precautions should observe certain precautions to further reduce the risk of personal injury or damage to the computer. Do not apply heavy pressure to the computer or subject it to sharp impacts. Excessive pressure or impact can damage computer components or cause your computer to malfunction.
Page 55: Connecting The Ac Adapter
Before adding any of these devices to the computer, be sure to complete After setting up your computer, you may want to: ❖ Add more memory. See ❖ Connect a mouse. See ❖ Connect a full-size keyboard. See keyboard” on page 68 ❖...
Page 56 Other precautions Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter.
Page 57 If the power cable becomes damaged or the plug overheats, discontinue use. There is a risk of electric shock. Never remove the power plug from the outlet with wet hands. Doing so may cause an electric shock. Getting Started Other precautions See “Contacting Toshiba” on...
Page 58: Charging The Battery
Getting Started Turning on the computer Charging the battery Before you can use the battery to power the computer, you must charge it. Connect the computer to a live electrical outlet using the AC adapter and power cable. When the AC adapter is connected to a live electrical outlet, the system indicator panel’s AC power light ( battery light (...
Page 59: Turning On The Power
Lift the display panel. To avoid damaging the display panel, do not force it beyond the point where it moves easily, and never lift the computer by the display panel. Small bright dots appear on your TFT display when you turn on your computer.
Page 60: Setting Up Your Software
Getting Started Setting up your software For the meaning of each light on the system indicator panel, “System indicator panel lights” on page The preinstalled operating system will load automatically. When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.
Page 61: Registering Your Computer With Toshiba
A window will ask whether you want to register with Toshiba or Microsoft. Click Yes to register, or No to exit the process. If you click No, you can register with Toshiba by clicking the NOTE Register with Toshiba icon on the desktop.
Page 62: Turning Off The Computer
Getting Started Turning off the computer Turning off the computer It’s generally a good idea to turn off your computer when you are not using it. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery.
Page 63: Closing The Display Panel
Closing the display panel When you are finished, shut the computer down and close the display panel to keep dust and dirt out of the computer. If you close the computer while it is still on, these actions will occur: ❖...
Page 64: Chapter 3: Connecting Other External Devices
Chapter 3 Connecting Other External Devices This chapter describes how to connect devices that can increase the capabilities of your Satellite computer. Using external display devices Your computer comes with a built-in LCD display, but you can also connect three different types of external display devices to one of two available video ports: ❖...
Page 65: Selecting Video Cables
For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video.
Page 66: Directing The Display Output When You Turn On The Computer
Connecting Other External Devices Using external display devices “Directing the display output when you turn on the computer” on page Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: Connect the monitor’s video cable to the RGB port on the back of the computer.
Page 67: Adjusting The Quality Of The External Display
Release the TECHNICAL NOTE: You can also change these settings using the Display Properties Box. For more information on switching the display output, see “Display modes” on page Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings.
Page 68: Using An External Keyboard
Connecting Other External Devices Using an external keyboard Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer’s PS/2 port supports any PS/2- compatible keyboard. If you connect a PS/2 keyboard to the computer while it is in NOTE Standby/Hibernation mode, you will not be able to use the keyboard when you turn the computer on.
Page 69: Making Your External Keyboard Emulate The Fn Key
Do not worry: you can use a key combination on the external keyboard to emulate the You can set up this key combination through the Windows Control Panel Toshiba Hardware Setup option icon. For more information about Hardware Setup, see on page 164.
Page 70: Connecting A Local Printer
Connecting Other External Devices Connecting a local printer Click Pointers and Other Hardware. Double-click the Toshiba HW Setup icon. Select the Pointing Devices tab, then click Simultaneous. Connecting a local printer Read the documentation that came with your printer. Follow NOTE the manufacturer’s instructions when connecting a local...
Page 71: Connecting An External Diskette Drive
If the computer is on, turn it off. Connect the printer cable to the printer and to the computer’s parallel port. Use the printer cable illustration as a connection guide. To the computer Identifying the ends of a parallel printer cable Plug the printer’s power cable into a live electrical outlet.
Page 72: Connecting External Speakers Or Headphones
Connecting Other External Devices Connecting external speakers or headphones Connecting an optional external USB diskette drive Connecting external speakers or headphones To attach an external stereo output device: Locate the headphone jack on the front of the computer. Using any necessary adapters, plug the cable from the external audio device into the headphone jack.
Page 73: Using An Expansion Device
Adding memory HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit toshiba.com. Your Satellite computer is equipped with two memory slots which can provide for various memory configurations. When additional memory is added, or original memory replaced, it is recommended that you use only compatible memory.
Page 74: Installing A Memory Module
Connecting Other External Devices Adding memory check. A message may display. If this occurs, contact Toshiba’s support center at (800) 457-7777. Since your computer was built to order, it should have enough memory to run your current applications. However, if your requirements change, you can install extra memory.
Page 75 Connecting Other External Devices Removing the memory module cover Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its pin connector on the side you insert into the computer.
Page 76: Removing A Memory Module
Connecting Other External Devices Adding memory Inserting the memory module into the slot Replace the cover plate and the screw. Turn the computer over and restart it. When you turn on the computer, it automatically recognizes the additional memory. Removing a memory module If you need to remove a memory module: Complete steps 1–5 in down the computer and open the memory module cover.
Page 77: Using Slim Selectbay Modules
Removing the memory module Carefully remove the module from the slot. Replace the cover plate and screws. Turn the computer over and restart it. Using Slim SelectBay The Slim SelectBay® gives you additional flexibility. By inserting and removing Slim SelectBay® modules, you can configure your computer for the task at hand without having to carry unnecessary components with you when you travel.
Page 78: Removing A Module From The Slim Selectbay
Connecting Other External Devices Using Slim SelectBay® modules ❖ Secondary hard disk drive (HDD) HINT: Items from this list that did not come with your computer can be purchased separately. See the accessories information packaged with your system or visit www.toshibaaccessories.com Removing a module from the Slim SelectBay Use caution when lifting or turning your computer.
Page 79: Inserting A Module Into The Slim Selectbay
Unlatching the Slim SelectBay Slide the module out of the computer. Sliding the module out If you are removing the weight saver, retain it for transporting the computer when no other module is installed in the Slim SelectBay Inserting a module into the Slim SelectBay To install a module into the Slim SelectBay module all the way into the Slim SelectBay Connecting Other External Devices...
Page 80: Inserting And Removing Hard Drives
Lift the hard drive bay cover to expose the hard drive. Grasp the plastic tab on the exposed edge of the hard drive and pull it to remove the hard drive from the computer. S1 can use various hard drive capacities. “Turning off the computer” on page...
Page 81 Connecting Other External Devices Inserting and removing hard drives Removing the hard drive from the computer Pull the clips off of the old hard drive and remove the cover. Removing the cover Snap the cover onto the new hard drive. Snapping the cover onto the new hard drive Install the new hard drive by sliding it into the hard drive bay and pressing it firmly until it locks.
Page 82: Inserting And Removing Pc Cards
Connecting Other External Devices Inserting and removing PC Cards Inserting the new hard disk drive Replace the hard drive bay cover and tighten the screw removed in step 5 above. Inserting and removing PC Cards Your Satellite computer comes with two stacked PC Card slots and supports three types of PC Cards: ❖...
Page 83: Removing A Pc Card
There are three different ways to insert a PC Card: ❖ Turn off the computer and follow the steps below. ❖ Insert the PC card while the computer is running. Follow the steps below. ❖ Hot swap the card (choose this method if there is already a PC Card in slot you wish to use).
Page 84: Setting Up A Pc Card For Your Computer
Connecting Other External Devices Inserting an SD® card Locate the PC Card ejection button that corresponds to the slot in which your PC Card is installed. The top tab releases a card in the upper slot. The bottom tab releases a card in the lower slot. Press the PC Card eject button once to extend it, and push it in to remove the PC Card.
Page 85: Connecting Your Modem To A Telephone Line
Connecting your modem to a telephone line If Windows and insert it again. To remove an SD the card will pop out slightly. The green LED on the left side of the computer will glow when the card is being accessed. Do not touch the SD area to static electricity which can destroy data.
Page 86: Connecting To A Phone Line
Connecting Other External Devices Connecting your modem to a telephone line Connecting to a phone line Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Page 87 Connecting Other External Devices Connecting your modem to a telephone line Connecting to a wall jack The modem is designed for use with a standard analog telephone line. Do not connect the modem to a digital telephone line. A digital line will damage the modem. Now you’re ready to send a fax or use the modem to connect to an online service or the Internet.
Page 88: Chapter 4: Learning The Basics
Chapter 4 Learning the Basics This chapter covers the basics of using your computer. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. You will lose all the work since your last save if, for example, the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working.
Page 89: Using The Keyboard
It’s easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy. ❖ Use Error-checking and Disk Defragmenter regularly to conserve disk space and improve performance.
Page 90: Character Keys
Learning the Basics Using the keyboard Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The space bar creates a space character instead of just passing over an area of the page. ❖...
Page 91: Ctrl, Fn, And Alt Keys
programs assign separate functions to the right and left keys, or to the regular and numeric pad the full-sized keyboard. Using the these separate keys, as follows: ❖ Press the right side of the enhanced keyboard. ❖ Press on the numeric pad of the enhanced keyboard. Ctrl, Fn, and Alt keys Ctrl Ctrl, Fn, and Alt keys...
Page 92: Windows Special Keys
Learning the Basics Using the keyboard Windows special keys The Windows special keys Your computer’s keyboard has two keys that have special functions in Windows: ❖ Start key—Opens the Start menu ❖ Application key—Has the same function as the secondary mouse (or AccuPoint II) button Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
Page 93 To turn the numeric overlay on, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on. To do so: ❖...
Page 94: Using The Accupoint Ii Pointing Device
AccuPoint II buttons—Each button can be programmed to perform a function you select. To program these buttons: Right-click the Toshiba Dual Pointing Device icon in the task tray. Click Detailed Setting. Select the AccuPoint tab.
Page 95: Using The Touchpad
Click OK. The button is now programmed with the function you chose. Left TouchPad button—Performs the same function as the left button on a mouse. When a step instructs you to click or choose an item, move the cursor to the item, then press and release the left TouchPad button.
Page 96: Control Buttons
Learning the Basics Using the TouchPad™ Control buttons When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button. To double-click, press the primary button twice in rapid succession. The primary button usually corresponds to the left mouse button.
Page 97: Using Toshiba Console
Using TOSHIBA Console The TOSHIBA Console icon, located on the Windows desktop, activates the Toshiba Console. This gives you quick access to some common functions. To access the TOSHIBA Console: Click Start, then click All Programs. Point to Toshiba Console, then click the resulting TOSHIBA Console selection.
Page 98: Starting A Program
Learning the Basics Starting a program Starting a program The easiest way to start a program is to double-click the name of a file that is associated with the program you want to use. To find the file, use My Computer or Windows If you prefer to open the program first, you have four options.
Page 99: Starting A Program From Windows Explorer
Starting a program from Windows If a program is not listed in the Programs menu, you can start it from Windows view of your computer’s contents as a hierarchy or “tree.” You can easily see the content of each drive and folder on your computer.
Page 100: Starting A Program From The Run Dialog Box
Learning the Basics Starting a program To close the program, click the Close button in the upper-right corner of the program’s window. Starting a program from the Run dialog box This example uses the Run command to start Wordpad: Click Start, then click Run. The Run dialog box appears.
Page 101: Saving Your Work
Saving your work Before you turn off the computer, save your work on the hard disk drive or a diskette. This is one of the most important aspects of computing. TECHNICAL NOTE: Save your data even when you are using the Standby command, in case the main battery discharges before you return to work.
Page 102: File Names
Learning the Basics Saving your work A sample Save As dialog box Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 103: Printing Your Work
Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft with a .doc extension. Any file name with an extension of “.doc”...
Page 104: Using The Dvd-Rom Or Multi-Function Drive
Learning the Basics Using the DVD-ROM or multi-function drive A sample Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print. Click Print. Using the DVD-ROM or multi-function drive Optical storage has become the preferred medium for software, music, and video.
Page 105 Using the DVD-ROM or multi-function drive If a DVD-ROM drive or multi-function drive is not currently installed in the Slim SelectBay, follow the instructions in “Using Slim SelectBay® modules” on page TECHNICAL NOTE: Your DVD-ROM or multi-function drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region.
Page 106: Inserting Compact Discs
Learning the Basics Using the DVD-ROM or multi-function drive Manual eject hole—Use if you need to release the disc tray when the power is off. Use a straightened paper clip or other narrow object to press the manual eject button located inside the hole.
Page 107 Using the DVD-ROM or multi-function drive Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in DVD-ROM or multi-function drive” on page Place the disc carefully in the disc tray, label side up. Positioning the disc in the drive Gently press the disc onto the center spindle until you feel it click into place.
Page 108: Removing Compact Discs
Learning the Basics Using the DVD-ROM or multi-function drive You are ready to use the disc. Playing a CD or DVD For information on playing a disc, see speakers or headphones” on page Removing compact discs To remove a compact disc (CD or DVD) with the computer turned on: Press the eject button on the drive.
Page 109: Using Pc Cards
❖ Do not apply a label to, or otherwise mar the surface of a disc. ❖ Hold a disc by its outside edge. Fingerprints on the surface can prevent the DVD-ROM drive or multi- function drive from reading the data properly. ❖...
Page 110: Using Sd Cards
Learning the Basics Using SD® cards For example: ❖ Do not remove a hard disk card while the system is accessing it. ❖ Do not remove a network card while you are connected to a network. ❖ Do not remove a SCSI card while any of the SCSI devices connected to it are operating.
Page 111: Using Your Computer At The Office
Using your computer at the office By connecting an external monitor, external full-size keyboard, and a mouse, you can work with your notebook as if it were a standard office computer. An external monitor or projector connects to the RGB port. An external PS/2-compatible keyboard or a PS/2 mouse connects to the PS/2 port.
Page 112: Caring For Your Computer
To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. “Running the computer on battery 123.
Page 113: Moving The Computer
Although your notebook computer is built to withstand reasonable shock and vibration, transport it in a carrying case for long trips. You can purchase a carrying case from your Toshiba dealer, through the accessories information packaged with your system, or visit Powering down the computer...
Page 114: Using Turn Off Or Shut Down
Learning the Basics Powering down the computer You can set the computer to turn on automatically at a time you designate. This option is helpful for transferring files by modem at night. You can set the computer to turn on and send or receive the files while you are asleep.
Page 115 ❖ When starting up again, the system does not automatically open programs and files you were using. For the Windows XP Home operating system, follow these steps to shut down the computer: Click Start, and then select Turn off computer. The Turn off computer dialog box appears.
Page 116 Toshiba’s Power Management utility. Click Start, Control Panel, and then Performance and Maintenance. Double-click the Toshiba Power Saver icon. In the Running on batteries section, click the Details button, then the System Power Mode tab. Select the options you want from the drop-down lists.
Page 117: Using Hibernation
Click the Override all Modes with settings here button. ❖ Click DC only to apply the settings only when you are using battery power. ❖ Click All to apply the settings whenever when you are using battery power or outlet power. Click OK.
Page 118 Configuring your computer for Hibernation: Click Start, Control Panel, and then Performance and Maintenance. In the Control Panel window, double-click the Toshiba Power Saver icon. Select the Power scheme. In the Running on batteries area, click the Details button.
Page 119: Using Standby
Click the Hibernate tab, and then click the Enable hibernate support checkbox (this is the default setting). Click Apply. Click OK. Click OK again, then close the Control Panel. The computer is now set to automatically go into Hibernation when your option settings occur. For more information about the Power Saver utility, see NOTE “Power Saver”...
Page 120 Learning the Basics Powering down the computer ❖ While in Standby mode, the computer uses some battery power. A fully charged main battery will last up to eight hours in Standby mode. ❖ Restarting from Standby uses less time and battery power than restarting from Turn Off Computer or Hibernation.
Page 121 Toshiba’s Power Saver utility. Click Start, Control Panel, and then Performance and Maintenance. In the Control Panel window, double-click the Toshiba Power Saver icon. In the Running on batteries area, select the Power scheme, click the Details button, then select the System Power Mode tab.
Page 122 Learning the Basics Powering down the computer Click OK again, then close the Control Panel. For more information about the Power Saver utility, see NOTE “Power Saver” on page Starting again from Standby mode To start up the computer from Standby mode, press the power button until the on/off light changes to green.
Page 123: Chapter 5: Mobile Computing
It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at is maximum energy efficiency, so that you can use it for longer periods of time while traveling.
Page 124: Battery Notice
Mobile Computing Running the computer on battery power Battery Notice To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month until the battery is fully discharged. Please see battery life” on page 132 continuously operated on AC power, either through an AC adapter or a docking station (if applicable to your system), for an extended period (more than a month) the battery may fail...
Page 125: Charging The Rtc Battery
24 hours. The computer’s RTC battery is a Lithium Ion (Li-Ion) battery and should be replaced only by your dealer or by a Toshiba service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations.
Page 126: Monitoring Battery Power
Mobile Computing Running the computer on battery power ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature. ❖ The battery is almost completely discharged. Leave the power connected and the battery should begin charging after a few minutes.
Page 127 Running the computer on battery power Click Start, then Control Panel, and then Performance and Maintenance. In the Control Panel window, double-click the Toshiba Power Saver icon. The Toshiba Power Saver Properties dialog box appears. Sample Toshiba Power Saver Properties Dialog Box The Power Save Modes tab displays the remaining amount of time for each of the different power usage modes.
Page 128: What To Do When The Battery Alarm Sounds
You Windows operating system offers two alarms before your system shuts down. To change the default alarm settings: Click Start, then Control Panel, and then Performance and Maintenance. Double-click the Toshiba Power Saver icon. Select the appropriate Running on Batteries option. Click the Details... button. “Power Saver”...
Page 129: Changing Batteries
Select the Alarms tab and adjust the settings to suit your needs. Before your computer runs out of battery power, save your data and take one of the following actions: ❖ Suspend or shut down your computer. ❖ Shut down your computer and replace the main battery with a charged one.
Page 130 Mobile Computing Changing batteries Battery release latch Pull the discharged battery module out of the computer. Removing the discharged battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in Insert the charged battery into the slot until the latch clicks.
Page 131: Taking Care Of Your Battery
The battery pack has been designed so that you cannot install it with reverse polarity. If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position. Turn the computer right side up.
Page 132: Maximizing Battery Life
Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through toshiba.com. ❖ Reverse Polarity should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity.
Page 133: Disposing Of Used Batteries Safely
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them. Under federal, state and local laws, it may be illegal to dispose of old batteries by placing them in the trash.
Page 134: Conserving Power
Putting spent batteries in the trash is not only irresponsible, it may be illegal. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. Conserving power How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as: ❖...
Page 135: Power Usage Modes In Windows Xp Professional
Toshiba has combined these options into preset power usage modes. Using one of these modes lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs. The following sections describe how to choose a power usage mode and discuss each power-saving option.
Page 136: Additional Options For Power
Depending on the amount of time you spend away from external power sources, the capacity of one battery pack may be sufficient for your needs. However, if you need more portable power, Toshiba provides these options: ❖ Purchase extra battery packs.
Page 137: Chapter 6: Exploring Your Options
Chapter 6 Exploring Your Options In this chapter, you will explore some of the special features of your Satellite notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in ® the Windows Appendix A to view situations where Windows from Windows find documents, set up system components, and perform most other computing tasks.
Page 138 Exploring Your Options Exploring the desktop Icons Start button Sample Windows Icons An icon represents a file or program that can be quickly activated by double-clicking the icon. The icons initially displayed on your Windows include: Recycle Bin — Holds files you’ve deleted. You may be able to retrieve these files until you empty the Recycle Bin.
Page 139 Your desktop may contain other icons depending on your configuration. See Windows specific information on each icon and how to use it. Start button You use the Start button to: ❖ Start programs ❖ Access Microsoft update information ❖ Open documents ❖...
Page 140 Exploring Your Options Exploring the desktop Windows XP online Help Click an item, or use the Search box to locate a specific topic. Quick Launch toolbar The Quick Launch toolbar displays icons of tasks or programs, similar to desktop icons. You can access these icons quickly and conveniently at any time as they are not covered by the windows of other executing programs.
Page 141: Exploring Audio Features
Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 142: Using External Speakers Or Headphones
Exploring Your Options Exploring audio features Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers.
Page 143: Recording Sounds
Recording sounds You may record sounds and save them as.wav files using the built-in microphone or an external microphone. The easiest way to record is through the computer’s built-in microphone. DEFINITION: A .wav (pronounced “wave”) file is the format for storing sound in files in Windows.
Page 144: Playing An Audio Cd-Rom
Exploring Your Options Exploring audio features Click the Record button. Speak normally into the microphone. The maximum recording time is 60 seconds. When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu.
Page 145: Exchanging Data With Another Computer
Sample Windows Media The CD Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/pause button on the CD Player control panel. ❖ To stop the CD, click the Stop button. Before using headphones to listen to an audio CD, turn the volume dial down.
Page 146: Transferring Files
Exploring Your Options Exchanging data with another computer Transferring files You can transfer files to another computer using your infrared port, or with an adapter cable. To transfer files through the parallel port, you need an optional LapLink Connect the cable. Load the transfer program on both computers.
Page 147: Determining The Com Port
Exchanging data with another computer Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 148: Connecting The Modem To A Telephone Line
Exploring Your Options Exchanging data with another computer bring up the dialog box with information specific to that modem. Click the Diagnostics tab, and then click Query Modem. Windows XP communicates with the modem and displays identifying information reported by the modem. If Windows XP cannot communicate with the modem, it displays an error message.
Page 149 Card or an optional Wi-Fi information about wireless networking, refer to your wireless network device documentation or contact your authorized Toshiba service provider. Setting up the connection To set up an office connection, consult your network administrator for network settings and additional considerations.
Page 150 Your Wi-Fi Mini PCI or Bluetooth your computer system. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Provider. Mini PCI or Bluetooth ™ module. However, if you do ™...
Page 151: Toshiba's Online Resources
Start the Bluetooth Bluetooth Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites can provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades. For more information, see “Contacting Toshiba”...
Page 152: The Internet
Exploring Your Options An overview of using the Internet ❖ Connecting to the Internet ❖ Surfing the Internet ❖ Internet features ❖ Uploading and downloading files from the Internet The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines.
Page 153: Connecting To The Internet
Connecting to the Internet To connect to the Internet, you may need: ❖ A modem ❖ A Web browser ❖ A telephone line ❖ An Internet Service Provider (ISP) account The Microsoft automatically configured on your system so that when you first start it, it guides you through signing up for a new ISP account, or assists you in setting up your computer to work with your existing ISP.
Page 154: Internet Features
Exploring Your Options An overview of using the Internet known as links. Clicking a link automatically transfers your Web browser to that site. You can also use a Search Engine, a Web site specifically designed to help you look for information. Internet features The Internet offers many types of communication tools to help you perform many tasks.
Page 155: Uploading And Downloading Files From The Internet
Exploring Your Options An overview of using the Internet Uploading and downloading files from the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer).
Page 156: Chapter 7: Toshiba Utilities
Your notebook computer includes several utilities designed to help you reconfigure your system and best meet your individual needs. Together, these allow you to ascertain certain system details, set additional options, and change default values. The Toshiba utilities are: ❖ Hotkey utility ❖...
Page 157: Hotkey Utility
Standby ] and Hibernation [ Fn+F3 To activate the utility: Click Start, All Programs, Toshiba Utilities, and then click Hotkey utility. The Toshiba Hotkey window appears. Put a check mark next to the desired option.
Page 158 Toshiba Utilities TOSHIBA Console The TOSHIBA Console icon, located on the Windows desktop, activates the TOSHIBA Console. This gives you quick access to some common functions. To access the TOSHIBA Console: Click Start, then click All Programs. Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection.
Page 159: Toshiba Accessibility
TOSHIBA Accessibility The Toshiba Accessibility window The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the a sticky key, meaning you can press it once, release it, and then press a function key to activate the hot key function.
Page 160: Fn-Esse
“Hot Keys” on page You can assign any key that is not associated with a hot key or a keyboard overlay. Starting Fn-esse Click Start, point to All Programs, Toshiba Utilities, then click Fn-esse. The Fn-esse keyboard appears. ® program without using the Start menu.
Page 161 Click and hold the primary button as you drag the highlighted item from Explorer to the key on the Fn-esse keyboard to which you want to assign it. Release the primary button. Toshiba Utilities Fn-esse® ® Explorer (or the program...
Page 162: Using The Keyboard Or Pointing Device To Assign Keys
Toshiba Utilities Fn-esse® Fn-esse displays the Add/Edit Command dialog box with the Description, Command Line and Working Directory fields automatically completed. Click OK to close the Add/Edit Command dialog box with your key assignment in place. The program or document is now associated with the key you just selected.
Page 163: Viewing Existing Key Assignments
Fn-esse keyboard. Fn-esse displays the Function Key Assignments dialog box. This box lists all the key assignments and the program or document to which each key is assigned. plus the appropriate key from within any ® program. Toshiba Utilities Fn-esse® ®...
Page 164: Changing Or Removing Existing Key Assignments
HW Setup program. Accessing Toshiba HW Setup To access Toshiba HW Setup, double-click the TOSHIBA Console icon on the desktop. The TOSHIBA Console screen appears. Click on the TOSHIBA Hardware Settings icon to open the TOSHIBA HWSetup dialog box.
Page 165 Sample HW Setup Toshiba HW Setup has the following tabs: ❖ General — Shows the BIOS version ❖ Password — Allows you to set the user password and an owner string ❖ Device Config — Shows the Device configuration options ❖...
Page 166 Toshiba Utilities Toshiba HW Setup Dynamically Switchable—This mode is the default setting for your computer, and automatically changes the processing frequency and decreases voltage depending on the power source: ❖ AC Power—If your computer is connected to the AC adapter, the CPU frequency mode is set to high for faster processing.
Page 167: Power Saver
Open the Start menu, click Control Panel, then Performance and Maintenance. Click the TOSHIBA Power Saver icon. The Toshiba Power Saver Properties dialog box appears. Toshiba Power Saver Properties dialog box You may also access the Power Saver Properties from the TOSHIBA Console: Double-click the TOSHIBA Console icon on the desktop.
Page 168: Mobile Extension
You do not have to restart your system before they become default settings. Mobile Extension To adjust the settings for docking or using the Slim SelectBay, use the TOSHIBA Mobile Extension Service Configuration. To use the TOSHIBA Mobile Extension Service Configuration: Click Start, then Control Panel.
Page 169 Under the Bay Service tab, you can select behaviors like Hot Dock and Warm Dock for your Slim SelectBay. Sample SelectBay Service tab options For more information about expansion devices, see expansion device” on page Toshiba Utilities Mobile Extension “Using an...
Page 170: Chapter 8: Keeping Your Files Safe
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports the following types of passwords on the Satellite computer: ❖ A power-on (user-level) password that requires you to enter the password whenever you start the computer.
Page 171: User-Level Passwords
For most users, this is all the password security you’ll need. You can set (register) a user-level password in either Toshiba Hardware Setup or System Setup. If you use System Setup however, you can also create a password service diskette which can be used to bypass the password function when starting your computer.
Page 172: Using An Instant Password
Setting a password leaves your computer secure so that nobody can access your files. You must enter the password before you can work on your computer. Toshiba supports the several types of passwords on your computer: ❖ An instant password — Secures your open programs and files when leaving the computer temporarily ❖...
Page 173: Setting A User Password
Setting a user-level password in System Setup HINT: If you forget your password and have lost your password service diskette, contact the Toshiba Global Support Centre (US telephone number (800) 457-7777). To register a user-level password in System Setup and create a password service diskette: Click Start, then Shut Down.
Page 174 Keeping Your Files Safe User-level passwords The computer shuts down and turns itself off. Connect your diskette drive. For instructions, see “Connecting an external diskette drive” on page Insert a write-enabled diskette into the diskette drive. HINT: Run System Setup outside Windows, at a system prompt.
Page 175: Disabling A User Password
To cancel the password that supports the instant and power- on password functions: Click Start, then Control Panel. Click Printers and Other Hardware. Click Toshiba HW Setup. Select the Password tab. Click Not Registered. Type your password in the Enter Password box and click TECHNICAL NOTE: You have three tries to enter the correct password.
Page 176: Using The Instant Password
Keeping Your Files Safe User-level passwords The computer shuts down and turns itself off. HINT: Run System Setup outside Windows, at a system prompt. If you try to run System Setup from an MS-DOS session under Windows, results can be unpredictable. Hold down the button in until the on/off light on the system indicator panel turns on (green)—about one second.
Page 177: Using A Supervisor Password
A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password Click Start, then click All Programs. Point to Toshiba Console, then click the resulting Toshiba Console selection. The Toshiba Console window appears. Select Security. Sample Toshiba Console Security window Click the Supervisor password icon.
Page 178: Deleting A Supervisor Password
Select an option under User Password Mode. Click OK. Deleting a supervisor password Click Start, then click All Programs. Point to Toshiba Console, then click the resulting Toshiba Console selection. The Toshiba Console window appears. Select Security. Sample Toshiba Console Security window Click the Supervisor password icon.
Page 179: Hard Disk Drive Passwords
Hard disk drive passwords Your computer comes with a program preinstalled that lets you set two types of hard disk drive passwords, user and master. These passwords protect your primary and secondary hard disks as follows: ❖ Setting a hard disk drive user password prevents an unauthorized user from accessing your hard disk, even if it is removed and installed on another computer.
Page 180: Setting A Hard Disk Drive Master Password
BE ABLE TO ACCESS YOUR HARD DISK AGAIN, unless you’ve set a hard disk drive master password. Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the hard drive.
Page 181 Click OK. Make sure you choose a hard disk drive master password you can remember easily. If you set a hard disk drive user password and later forget the password or lose your password diskette, you will need to enter the hard disk drive master password in order to access your hard disk.
Page 182: Setting A Hard Disk Drive User Password
Setting a hard disk drive user password To set a hard disk drive user password: Click Start, then click Run. In the Run box, type: c:\Program Files\toshiba\Windows Utilities\HDDPW\HDDPW press Enter The Hard Disk Drive Password program HDDPW displays a warning screen.
Page 183: Deleting The Hard Disk Drive User Password
To delete a hard disk drive user password: Click Start, then click Run. In the Run box, type: c:\Program Files\toshiba\Windows Utilities\HDDPW\HDDPW press Enter The Hard Disk Drive Password program, HDDPW, displays a warning screen.
Page 184 Keeping Your Files Safe Hard disk drive passwords To delete the hard disk drive user password, click Delete. HDDPW displays another warning and asks you whether you want to delete the hard disk drive user password. Type your password and press If the password you typed matches the registered hard disk drive user password, the password is deleted.
Page 185: Chapter 9: Troubleshooting Guide
It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Occasionally, as you work with your computer, you may encounter one or more of the following problems.
Page 186: Problems When You Turn On The Computer
Troubleshooting Guide Problems when you turn on the computer Check that the electrical outlet is working by plugging in another appliance such as a lamp. Check that the power cables are firmly plugged in. Check that all cables connecting peripheral devices to the computer are correctly and firmly attached.
Page 187 Toshiba logo is displayed. Press several times. Enter The message “Password=” appears after the Toshiba logo is displayed. This message is displayed when the password has been set. If this message appears, enter the password and then press Troubleshooting Guide “Changing batteries”...
Page 188: Resolving A Hardware Conflict
Troubleshooting Guide Resolving a hardware conflict Three consecutive mistakes in entering the password turns off the computer. The computer is not accessing the hard disk or the diskette drive. If the Boot Priority option in Hardware Setup is set to HDD→FDD and you have a hard disk problem, you will not be able to start the computer.
Page 189: Resolving Hardware Conflicts On Your Own
Troubleshooting Guide Resolving a hardware conflict The recommended procedure for getting multiple devices to work together is to add and configure one device at a time. After you add each device, test it to make sure it and all previously connected devices work. The device most recently connected to the system is the one most likely to be causing a hardware conflict.
Page 190 Troubleshooting Guide Resolving a hardware conflict two devices will compete for the same system resources. You simply plug in the device and turn on your computer. Your operating system automatically configures your system to accommodate the new device. However, if you install an older (legacy) device that Windows cannot detect, Windows may have difficulty assigning system resources to it.
Page 191: Memory Module Problems
❖ The Resources tab, which lists the resources assigned to the device. If you have a device conflict, it is shown in the Conflicting device list. ❖ The Drivers tab, which displays the drivers being used by the device. For further information about Device Manager, refer to Windows XP online help.
Page 192: Power And The Batteries
Troubleshooting Guide Resolving a hardware conflict If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module. Power and the batteries Your computer receives its power through the AC adapter and power cable or from the system batteries (main battery, real- time clock (RTC) battery and backup battery).
Page 193: Keyboard Problems
If the battery icon is glowing after 20 minutes, let the computer continue charging the battery for at least another 20 minutes before you turn on the computer. If the battery icon does not glow after 20 minutes, the battery may have reached the end of its useful life.
Page 194: Accupoint Ii Problems
Troubleshooting Guide Resolving a hardware conflict You’ve connected an external keyboard and Windows displays one or more keyboard error messages. The keyboard you connected may be defective or incompatible with the computer. Try using a different make of keyboard. Nothing happens when you press the keys on the external keyboard.
Page 195: Display Problems
After cleaning the cap, position it on the peg and press it into place. The peg is square, so be careful to align the cap’s hole with the NOTE peg. Display problems The screen is blank. Display Auto Off may have taken effect. Press any key to reactivate the screen.
Page 196 Troubleshooting Guide Resolving a hardware conflict Windows displays a message that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware. Reduce the size of the color palette to one that is supported by the computer’s internal display.
Page 197: Disk Drive Problems
Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors. Sometimes a disk problem may cause one or more files to appear to have garbage in them. Typical disk problems are: You are having trouble accessing a disk, or some of the data appears to be missing.
Page 198 Troubleshooting Guide Resolving a hardware conflict You may also be able to recover lost data by using utility software, which is available from your network administrator. Some programs run correctly but others do not. This is probably a configuration problem. When a program does not run properly, refer to its documentation and check that the hardware configuration meets its needs.
Page 199: Modem Problems
Modem problems The modem dials the line but does not connect, or cannot maintain the connection. You may be connected to a noisy telephone line. To check this, connect an ordinary telephone to the telephone line and try placing a phone call. If you hear an unusual amount of noise or static, try connecting the modem to a different telephone line or connecting at a later time.
Page 200 Troubleshooting Guide Resolving a hardware conflict Open the tray and remove the disc. Make sure the tray is clean. Any dirt or foreign object can interfere with the laser beam. Make sure the disc is seated properly on the spindle. The disc should click into place when pressed gently on the device spindle.
Page 201: Sound System Problems
The disc will not come out of the drive when you click the eject button on the screen. Press the button on the drive itself. Sound system problems You do not hear any sound from the computer. Adjust the volume control. There is a volume control dial on the computer, a volume control feature in the Windows Control Panel (“Sounds”), or it might be muted.
Page 202 Troubleshooting Guide Resolving a hardware conflict these devices to work together, several sections in this chapter may apply. Resource conflicts can cause problems when using PC Cards. Refer to “Resolving a hardware conflict” on page Card information structure (CIS) When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its CIS.
Page 203 available, try the card in that machine. If the card malfunctions again, it may be defective. Resolving PC Card problems Here are some common problems and their solutions: The slots appear to be dead. PC Cards that used to work no longer work.
Page 204: Printer Problems
Troubleshooting Guide Resolving a hardware conflict Click Stop xxxx, where xxxx is the identifier for your PC Card. Windows XP displays a message saying you may safely remove the card. Remove the card from the slot. There is still a yellow exclamation point PCMCIA controller icon in Device Manager (Windows XP).
Page 205: Internet Problems
Make sure the Parallel Port Mode option in Hardware Setup is set correctly for your printer. If your printer is ECP- compatible, this option should be set to ECP. If your printer is not ECP-compatible, this option should be set to Std. Bi- Direct.
Page 206: Dvd Operating Problems-Windows Xp
Troubleshooting Guide DVD operating problems–Windows XP letter, missed period (“dot”) or other mistake makes it impossible for your browser to locate the site. My browser cannot find a site I bookmarked. The World Wide Web is constantly changing. A site you bookmarked yesterday may not be available today or its server may be down to temporary repair.
Page 207 DVD-ROM drives and their operation. A blank screen appears while watching a DVD-ROM movie or title. Disable the Shut off Monitor feature in the Toshiba Power Saver Properties using the following steps: Click Start, then Control Panel. The Control Panel window appears.
Page 208 Troubleshooting Guide DVD operating problems–Windows XP The Display Properties dialog box appears. Click the Settings tab. Next to the words Screen Area, move the slider to a lower setting, such as 800 x 600 or 640 x 480. Click OK. The screen saver runs while you are watching a movie or title.
Page 209: Developing Good Computing Habits
Developing good computing habits This section suggests some good habits to develop so you are prepared if things go wrong. Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 210: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before contacting Toshiba: ❖ Review the troubleshooting information in your operating system documentation.
Page 211: Contacting Toshiba
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...
Page 212: Other Toshiba Internet Web Sites
Troubleshooting Guide Other Toshiba Internet Web sites Other Toshiba Internet Web sites toshiba.com computers.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm http://servicio.toshiba.com Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V.
Page 213 800-457-7777 (within the US) outside of the US 949-859-4273 ( this call may incur long distance charges) Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. 5249 6500 Troubleshooting Guide Toshiba’s worldwide offices...
Page 214 Troubleshooting Guide Toshiba’s worldwide offices The Netherlands Toshiba Information Systems Benelux B.V. Rivium Boulevard 41 2909 LK, Capelle a/d IJssel The Netherlands Papua New Guinea Fujitsu (PNG) Pty. Ltd. P.O. Box 4952 Boroko NCD, Papua New Guinea Portugal Quinta Grande Assisténcia Técnica Informática, Lda.
Page 215 Irvine, California 92618 United States Troubleshooting Guide Toshiba’s worldwide offices United Kingdom Toshiba Information Systems (U.K) Ltd. Toshiba Court Weybridge Business Park Addlestone Road Weybridge KT15 2UL United Kingdom The Rest of Europe Toshiba Europe (I.E.) GmbH Hammfelddamm 8 D-4-1460 Neuss Germany...
Page 216: Appendix A: Windows 2000 Supplemental Information
Appendix A Windows 2000 Supplemental Information This section describes the features that are available under the Windows 2000 Professional operating system. Using your computer for the first time The first time you turn on the computer, the Windows 2000 Professional Setup Wizard installs the devices it finds on your system, then guides you through several essential steps for setting up your computer.
Page 217: Completing Installation
Toshiba by double-clicking the Registration icon on your desktop. Registering your computer lets Toshiba keep you up-to-date with information about new products and upgrades, and also extends your Toshiba limited warranty worldwide at no charge to you.
Page 218: Connecting To The Internet
Windows 2000 Supplemental Information Connecting to the Internet ❖ Discover Windows—Click this option to read and learn more about the Windows 2000 Professional operating system. ❖ Connect to the Internet—Click this option to start the Internet Connection Wizard. If you prefer, you can set up your Internet connection later. At the bottom of the Getting Started with Windows 2000 screen there is a box labeled “Show this screen at startup.”...
Page 219 Windows 2000 Supplemental Information The Add Printer Wizard starts, and guides you through setting up your printer. Sample Add Printer Wizard Follow the instructions on the screen to add your printer. If your printer is not found, or to install the driver manually, use the printer driver that came with the printer to complete the setup process.
Page 220: Turning Off The Computer
Windows 2000 Supplemental Information Turning off the computer TECHNICAL NOTE: Some printers require a specific installation process. In this case, the Windows 2000 Add Printer Wizard will display an error message. If this happens, refer to your printer installation guide for further instructions. Turning off the computer Avoid turning off the power while a disk light on the system NOTE...
Page 221: Exploring The Desktop
Windows 2000 Supplemental Information Select Shut down and click OK. The computer shuts down and turns itself off. There are additional options and features for turning off your computer. For more information, see computer” on page Exploring the desktop Using the Start menu The Start menu enables you to: ❖...
Page 222: Using Windows 2000 Professional Online Help
Windows 2000 Supplemental Information Exploring the desktop Sample Windows 2000 Professional Start menu Using Windows 2000 Professional online Help For answers to common questions, click Start, then click Help to open the Windows 2000 Professional online Help. Sample Windows 2000 Professional online Help window Click an item on the Contents tab, or use the Index and Search tabs to locate a specific topic.
Page 223: Viewing Your Computer's Contents
Windows 2000 Supplemental Information You computer’s desktop includes several standard features: icons, Start button, Shortcut tray, Taskbar, System tray, and background pattern. Icons An icon represents a file or program that can be quickly activated by double-clicking the icon. The icons initially displayed on your desktop include: My Documents —...
Page 224: Naming Your Files
Windows 2000 Supplemental Information Backing up your work Windows Explorer either click Start, point to Programs, Accessories, then click Windows Explorer or you can right- click Start and then click Explore. Naming your files The Windows 2000 Professional operating system supports file names of up to 255 characters.
Page 225: Restoring Your Work
Windows 2000 Supplemental Information Sample Backup Wizard Click Backup Wizard and follow the instructions on the screen. Restoring your work The Restore Wizard feature allows you to restore previously backed-up work in the event of a hardware failure, accidental erasure, or other data loss or damage. Connect the backup device to your computer as shown in the manufacturer’s instructions.
Page 226: Running The Computer On Battery Power
Windows 2000 Supplemental Information Running the computer on battery power Running the computer on battery power To ensure that the battery pack maintains its maximum capacity, operate the computer on battery power at least once a month until the battery pack is fully discharged. Refer to “Maximizing battery life”...
Page 227: Shut Down Command
Windows 2000 Supplemental Information Shut down command The Shut down command powers off the computer. When you start up again, the computer runs a self-test and loads the operating system. You must open any programs and files you want to use. Factors to consider when choosing Shut down: ❖...
Page 228: Standby Command
Windows 2000 Supplemental Information Powering down the computer Standby option, because information is being retrieved from the hard disk instead of from memory. ❖ On restarting, the computer returns to the mode in which you left it, and opens all the programs and files you were using.
Page 229: Using Shut Down
Toshiba’s Power Saver utility. Open the Start menu, point to Settings, then click Control Panel. In the Control Panel window, double-click the Toshiba Power Saver icon. The Power Saver Properties dialog box appears. In the Running on batteries area, choose the power mode of your choice, and click the Details...
Page 230 Windows 2000 Supplemental Information Using Shut down A Properties dialog box appears. Sample Long Life Properties dialog box Select Shutdown for the options you want. ❖ When I press the power button Set this option to Shutdown so that the computer shuts down when you press the power button.
Page 231: Starting Again After Shut Down
Open the Start menu, point to Settings, then click Control Panel. In the Control Panel window, double-click the Toshiba Power Saver icon. To enable the Hibernation mode from the Toshiba Power Saver Properties dialog box: Click the Hibernate tab. Using Hibernation...
Page 232 Sample Toshiba Power Saver Hibernate tab Check the box associated with Enable hibernate support. Click OK to close the dialog box and click OK to close the Toshiba Power Saver utility. Then, close the Control Panel. To power down the computer using the Hibernation option, click Start, Shut Down, select Hibernate, then click OK.
Page 233: Going Into Hibernation Mode More Quickly
Toshiba’s Power Saver utility. Open the Start menu, point to Settings, then click Control Panel. In the Control Panel window, double-click the Toshiba Power Saver icon. In the Running on batteries area, choose the power mode of your choice, and click the Details... button. Select the System Power Mode tab.
Page 234: Starting Again From Hibernation
Windows 2000 Supplemental Information Using Standby Click OK again, then close the Control Panel. For more information about the Power Saver utility, see NOTE “Power Saver” on page Starting again from Hibernation To start up the computer from Hibernation mode, press the power button until the on/off light turns green.
Page 235: Going Into Standby Mode More Quickly
Toshiba’s Power Saver utility. Open the Start menu, point to Settings, then click Control Panel. In the Control Panel window, double-click the Toshiba Power Saver icon. The Power Saver Properties dialog box appears. In the Running on batteries area, choose the power mode of your choice, and click the Details...
Page 236: Starting Again From Standby
Windows 2000 Supplemental Information Using Standby Click OK again, then close the Control Panel. For more information about the Power Saver utility, see NOTE “Power Saver” on page Starting again from Standby To start up the computer from Standby mode, press the power button until the on/off light changes to green.
Page 237: Toshiba Utilities
Utilities” on page Hardware Setup utility. Toshiba Hardware Setup Toshiba Hardware Setup is the Toshiba configuration management tool available through the Windows operating system. It lets you view general system settings and specify the pointing device, display, CPU cache, boot priority, keyboard, USB, PC Card, password, device configuration and printer options for your computer.
Page 238 Windows 2000 Supplemental Information Toshiba Utilities To access Toshiba Hardware Setup, click Start, point to Settings, Control Panel, and double-click the HW Setup icon. The TOSHIBA HWSetup dialog box appears. Sample HW Setup Toshiba HWSetup has the following tabs: ❖...
Page 239 By changing any of the options that appear in the dialog boxes and clicking Apply, you can reconfigure that function. Any options that you change will become default settings when you restart your system. Toshiba Utilities function key, and to enable or...
Page 240: Appendix B: Hot Keys
Appendix B Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 241: Without A Password
Without a password key combination turns off the display and activates Fn + F1 the instant security. Using the AccuPoint II or pressing any key will activate a log in screen. See password” on page 176 With a password activates instant security. Press Move the AccuPoint II or press a key.
Page 242: Power Usage Mode
Presentation and Super Long Life Sample power usage modes The power usage mode in Windows XP under AC power is Full Power only. The properties of each mode are set in the Toshiba Power Saver utility. For more information, see page 167.
Page 243: Standby Mode
Standby mode This hot key puts the computer into Stand By mode. A message box is displayed by default to confirm that the computer is going into Stand By mode. This message box can be set so it does not display. Sample Stand By confirmation box For more information on Standby mode, see Standby”...
Page 244: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In o resolution of the internal display panel to match the resolution of the external display device. Display brightness This hot key decreases the screen brightness.
Page 245: Wireless Device Enable
Wireless device enable This hot key enables/disables the optional wireless devices in your computer (for systems with Wi-Fi The wireless modes are: Bluetooth module. You must start the Bluetooth enable it. This only applies the first time you enable Bluetooth Wi-Fi enabled—This enables only the Wi-Fi module.
Page 246: Keyboard Hot Keys
Hot Keys Keyboard hot keys Keyboard hot keys This hot key turns the cursor control overlay on and off. This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off. This hot key toggles the resolution between XGA (1024 x 768) and SXGA+ (1400 x 1050).
Page 247: Appendix C: Using Configfree™ With Your Toshiba Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities used for configuring networks that use both wired and wireless network devices. These utilities include the following: ❖ Connectivity Doctor — The Connectivity Doctor utility is used to help fix networking problems with your notebook computer.
Page 248: Getting Started
Quick Connect — The Quick Connect utility is used to configure a wireless LAN connection (ad hoc connection) between a personal computer and a Toshiba Wireless Projector. The Toshiba Wireless Projector utility must be installed in order to enable Quick Connect. For...
Page 249: Starting Configfree
Help — Displays the online help file. Starting ConfigFree To start ConfigFree, do any of the following: ❖ (Microsoft and then point to All Programs. Point to the TOSHIBA ConfigFree folder, and then click ConfigFree. ❖ (Microsoft button, and then point to Programs. Point to the TOSHIBA ConfigFree folder, and then click ConfigFree.
Page 250: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ Right-click the ConfigFree icon on the taskbar, and then click Options. For more information on configuring ConfigFree, see the online help. ConfigFree Utilities Connectivity Doctor The Connectivity Doctor displays the connection configuration and the status of all wired and wireless LAN devices that are connected to the network.
Page 251: Device Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities The Connectivity Doctor The Connectivity Doctor screen automatically refreshes. However, you can also use the Refresh button to refresh the screen. Device Settings The Device Settings screen displays a list of all wired, wireless, and infrared (for systems with infrared) devices that are connected to the network.
Page 252 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Viewing the device settings ❖ Network Connections — Displays the Network Connection window, which contains detailed information about the network connection. ❖ Enable/Disable — You can easily enable or disable any of the listed devices simply by selecting the desired device, and then clicking the Enable/Disable button.
Page 253: Profile Settings
Using ConfigFree™ with your Toshiba Computer Profile Settings The Profile Settings utility displays a list of all the registered profiles in ConfigFree. You can also add, modify, and delete profiles; switch the profile being used; and view specific details about each profile.
Page 254: Quick Connect
Toshiba Wireless Projector. As a result, you will not be able to use the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection will be broken and later re- established.
Page 255: Using Auto Switch
❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this will disconnect the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device.
Page 256: Auto Switch (Cable Disconnect)
Using ConfigFree™ with your Toshiba Computer Using Auto Switch ❖ From the Profile Settings screen, you can click the Auto Switch button. Auto Switch (Cable Disconnect) If a wired network cable is disconnected from the network, the Auto Switch (Cable Disconnect) option will automatically switch to another network device.
Page 257: Appendix D: Power Cable Connectors
Appendix D Power Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...
Page 258: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. alternating current BIOS basic input/output system bits per second compact disc CD-ROM compact disc read-only memory CMOS complementary metal-oxide semiconductor COM1...
Page 259 DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission fast infrared gigabyte hard disk drive...
Page 260 Glossary SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display—A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 261 backup—A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. basic input/output system (BIOS)—See BIOS. baud rate—The speed at which a communication device, such as a printer or modem, transmits information. Baud rate is the number of signal changes per second (not necessarily the same as bits per second).
Page 262 Glossary cache—A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD—An individual compact disc. See also CD-ROM. CD-ROM (compact disc read-only memory)—A form of high- capacity storage that uses laser optics instead of magnetic means for reading data.
Page 263 CPU cache—A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache. cursor—A symbol that indicates the current position on the screen. The shape of the cursor varies, depending on the program you’re using and what you’re doing.
Page 264 Glossary diskette—A thin, flexible disk in a protective jacket that stores magnetically encoded data. Diskettes can be removed from the computer and come in two sizes: 5.25-inch and 3.5-inch. Your computer uses 3.5-inch diskettes. See also double-density diskette, high-density diskette. document—Any file created with an application and, if saved to disk, given a name by which it can be retrieved.
Page 265 extension—See file extension. external device—See device. file—A collection of related information, saved on disk with a unique name. A file may be a program, information used by a program, or a document. See also document. file allocation table (FAT)—The section of a disk that keeps track of the location of files stored on the disk.
Page 266 Compare software. Hibernation—A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 267 L1 (level one) cache—Memory cache built into the processor to help improve processing speed. See also cache, CPU cache, L2 cache. L2 (level two) cache—Memory cache installed on the motherboard to help improve processing speed. It is slower than L1 cache and faster than main memory.
Page 268 Glossary modem—Short for “modulator/demodulator.” A device that converts information from digital to analog and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines. motherboard—The main circuit board in the computer. It contains the processor, memory, and other primary components.
Page 269 password—A unique string of characters entered by a user to verify his or her identity to the computer or the network. PC Card—A credit-card-sized expansion card designed to increase the capabilities of notebook computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter.
Page 270 Glossary removable disk—A disk that can be removed from a disk drive. A diskette is one example of a removable disk. resolution—A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi).
Page 271 system disk—A diskette that contains the operating system files needed to start the computer. Any diskette can be formatted as a system disk. A system disk is also called a “bootable disk” or a “startup disk.” Compare non-system disk. system prompt—The symbol (in MS-DOS, generally a drive letter followed by a “greater than”...
Page 272: Index
Index Numerics 101-key keyboard 90 AC adapter 55 DC IN socket 40 plugging in 40 AC power light 46 accessories carrying cases 113 devices 78 docking solutions 73 memory 73 AccuPoint II pointing device 45 replacing the cap 194 troubleshooting 194 AccuPoint II pointing device 94 Add Printer Wizard print a test page 219...
Page 273 removing 130 status 47 troubleshooting 192 unlocking 129 battery power Hibernation mode 227 Standby mode 228 button start 139 buttons CD or DVD controls 144 CD Player 145 caps lock key 47 light 47 playing an audio 144 CD or DVD control buttons 144 CD Player control panel 145 CD-ROM drive 144 opening 106...
Page 274 Index display latch 39 display panel adjusting 43 closing 63 handling 43 opening 43 disposing of used batteries 133 DMA assignments 189 double-click 96 DVD player general problems 206 DVD-ROM drive 42 troubleshooting 199 enabling Hibernation 231 Ethernet LAN port 149 expansion port 46 expansion capability 73...
Page 275 hot key power usage mode 135 hot keys 240 hot swapping PC Cards 109 peripherals 43 HW Setup 164 IBM 101-key enhanced keyboard 90 icon internet explorer 138 recycle bin 138 icons 35 definitions 223 desktop 223 Power Saver 167 Windows XP Professional desktop 138 Industry Canada requirement 4...
Page 276 Index on/off 47 Slim SelectBay battery 47 line-in jack 141 main battery 47 status 47 Master password 179 memory adding 73 expansion slots 74 memory module 46 removing 77 removing screws 74 microphone external 72 jack 39 problems 201 microphone jack 45 modem connecting to telephone line 86 determining COM port 147...
Page 277 44 Shut down command 114 hot key 135 using Standby 120 local 40 local, connecting 70 parallel 40 serial 40 troubleshooting 204 contacting Toshiba 34 diagnosing 185 forgetting your password 173 solving 185 sound system 201 keyboard 40 mouse 40...
Page 278 Index recording .wav files 141 sounds 141 recycle bin icon 138 removing PC Cards 83 restarting the computer 186 Restore Wizard 225 RJ-11 modem jack, connecting telephone cable 86 Run dialog box 100 safety disposing of batteries 133 safety cautions 35 saving files 101 ScanDisk instructions 197...
Page 279 41 Toshiba Internet Web sites 212 Toshiba Accessories information 37 TOSHIBA Console 97 Toshiba Power Saver Properties 231 Toshiba utilities HW Setup 164 Power Saver 167 Toshiba’s online resources 151 trademarks 23 transferring files 146 transferring information between...
Page 280 HW Setup 164 Power Saver 167 video projector adjusting display 67 connecting 64 volume control dial 41 Web sites 211 Web sites,Toshiba 212 Wi-Fi antenna on/off switch 39 wireless networking 148 Windows 2000 Setup Wizard 216 Windows 2000 Professional Backup Wizard 224...

This manual is also suitable for:

Tecra s1-117

Toshiba S1 User Manual

Chapter 1: Finding Your Way Around

Chapter 2: Getting Started

Chapter 3: Connecting Other External Devices

Chapter 4: Learning the Basics

Chapter 5: Mobile Computing

Chapter 6: Exploring Your Options

Chapter 7: Toshiba Utilities

Chapter 8: Keeping Your Files Safe

Chapter 9: Troubleshooting Guide

Appendix A: Windows 2000 Supplemental Information

Appendix B: Hot Keys

Appendix C: Using Configfree™ with Your Toshiba Computer

Appendix D: Power Cable Connectors

Quick Links

Troubleshooting

Related Manuals for Toshiba S1

Summary of Contents for Toshiba S1