Checks - Siemens MAMMOMAT 1000 Nova Maintenance Instructions Manual
Hide thumbs
Also See for MAMMOMAT 1000 Nova:
- Installation and start-up instructions manual (138 pages) ,
- Wiring diagrams (70 pages) ,
- Application handbook (30 pages)
Table of Contents
Advertisement
Column stand
3-
3
Column stand
3.1
Checks
SIM
Steel ropes
•
Do the steel ropes (balancing and flap), the drive belt, the suspension, or the pulleys
have any damage (e.g. fraying or splitting) or show signs of wear?
PMA
Oil and grease
•
If they are OK, lightly oil the wire cable, grease the rails, and then remove the protective
strips.
SIE
Limit switches
•
System ON. Move the lifting carriage up and down several times, the lifting carriage
should be in an upright (0°) position.
NOTE
•
Do the limit switches stop carriage travel at the top and at the bottom?
•
Activate safety switch S882. System movements must be blocked.
PMF
Vertical travel
•
Is the vertical travel smooth and noiseless?
•
Switch OFF the system and attach the protective strips once again.
SIM
Safety catch and rotation safety catch
•
Do the safety catch
visible damage? Are the springs in good condition?
Fig. 1:
Siemens AG
Medical Solutions
It is normal to hear some noise from the rotation of the radiation
filter in the collimator when switching the system ON.
(1/Fig. 1 / p. 17)
Safety catch
SPB7-230.101.02.05.02
02.06
and rotation safety catch
Page 17 of 34
CS PS SP
(2/Fig. 1 / p. 17)
have any
MAMMOMAT 1000/3000 Nova
17
Hide quick links:
Advertisement
Table of Contents
