Advertisement
Printed in Mexico
. . . . . . . . . . 2, 3
Care and Cleaning
of the Washer. . . . . . . . . . . . . . . . . . . . 13
Features . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Loading and Using
the Washer . . . . . . . . . . . . . . . . . . . . . . 11
Operating instructions . . . . . . . . .4-10
Installation Instructions
Troubleshooting Tips
. . . . . 19-24
Consumer Support
Consumer Help Indicator . . . . . . . . . 10
Consumer Support. . . . . . . . . . . . . . . . 26
Parts and Accessories. . . . . . . . . . .3, 26
Warranty . . .
.
. . . . . . . . . . . . . . . . . . . . . . 25
Write the model and serial
numbers here:
Model # _____________
Serial # ______________
You can find
them under
the lid of the
washer.
Installation Instructions
. 14-18
English/Français/Español
Owner's Manual &
GTW223
GTW331
GTW451
GTW490
GTW550
GTW580
233D2527P004 R.1
29-6395
02-21
Advertisement
Related Manuals for GE GTW223
Summary of Contents for GE GTW223
-
Page 1: Table Of Contents
Washer....13 GTW223 Features ......12... -
Page 2: Safety Instructions
IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill you or hurt you and others. All safety messages will follow the safety alert symbol and the word “DANGER”, “WARNING”, or “CAUTION”. These words are defined as: DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. - Page 3 “C” discharging heights from 60” - 96”. valve. Washers do not include supply hoses (only GTW223 model). Install or store where it will not be exposed to GE strongly recommends the use of factory specified temperatures below freezing or exposed to the weather, parts.
- Page 4 • manufacturer’s are on all models) when examples. recommended amount of using fabric softener. detergent. GE recommends • lid. the use of High Efficiency • Select options. detergents such as he in your NOTE: Washer will not start energy efficient washer.
- Page 5 GEAppliances.ca GTW490 GTW451 GTW331 GTW223...
-
Page 6: Operating Instructions
Operating instructions. Start/Pause Press Start to begin the cycle. NOTE: The lid must be closed for the washer to start the cycle. If the lid is closed, the lid will lock and the Lid Locked light will illuminate. Pressing Pause will unlock the lid (if locked at that time), pause the cycle and the Pause indicator light will blink. To continue the cycle, press Start again. -
Page 7: Features
GEAppliances.ca Wash Cycles-Cycle Selector Knob The wash cycle controls the type of washing process. The cycle selector knob can be turned in either direction. Turning the kn ob after starting a cycle will stop the washer and change the cycle/options to the new selection. Press Start to begin the new cycle selection. The chart below will help you match the items to be washed with the best wash cycle settings. - Page 8 Operating instructions. Wash Cycles-Cycle Selector Knob - Continued Items to Wash Cycle Wash Temp Soil Level Spin Selection Options Available Cycle Details Small loads of Speed Ex. Heavy Max/Extra Stain PreTreat Guide Utilizes an expedited wash period and lightly soiled items Wash Warm Heavy...
- Page 9 GEAppliances.ca Cycle Options Stain PreTreat (Not all features are on all models) The Stain PreTreat feature allows you to indicate what stains are on the garments in your load. This feature incorporates a patent pending treatment method. An initial water fill is performed at a temperature tailored to the stain type selected and to an amount which enables a concentrated cleaning step.
-
Page 10: Consumer Help Indicator
Operating instructions. Cycle Options - Continued (Not all features are on all models) Deep Fill Select the Deep Fill feature for loads where extra water is needed. Press the Deep Fill button once before starting the cycle to add an incremental amount of water to the wash load. Holding the Deep Fill button for 3 seconds will provide the deepest fill level possible;... - Page 11 Loading and using the washer. GEAppliances.ca Always follow fabric manufacturer’s care label when laundering. WARNING - Fire Hazard Never place items in the washer that are dampened with gasoline or other flammable liquids. No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so so can result in death, explosion, or fire.
- Page 12 About washer features. Automatic Load Sensing This determines the correct agitate profile, agitate duration and amount of water suited to the size and type of load placed in the washer. The washer will not start the wash cycle or fill with water if the lid is open. When the lid is closed the machine is able to begin filling with water in order to sense the load size.
- Page 13 About washer features. Automatic Load Sensing (Not all features are on all models) This determines the correct agitate profile, agitate duration and amount of water suited to the size and type of load placed in the washer. The washer will not start the wash cycle or fill with water if the lid is open. When the lid is closed the machine is able to begin filling with water in order to sense the load size.
- Page 14 Care and cleaning of the washer. GEAppliances.ca Exterior of the Washer Immediately wipe off any spills with a damp cloth. Interior of the Washer Leave the lid open after washing to allow moisture to evaporate. If you want to clean the basket, use a clean soft cloth dampened with liquid detergent;...
- Page 15 Strainer Screens (2) covered under the Warranty. Drain Hose Extension (For discharge heights from 60" - 96" GE Parts and Accessories Order on-line at GEApplianceparts.com today, 24 hours a day PARTS SUPPLIED or by phone at 1 800 661 1616 during normal business hours.
- Page 16 Installation Instructions LOCATION OF YOUR WASHER Do Not Install the Washer: IMPORTANT: Minimum Installation Clearances - Alcove or Closet 1. In an area exposed to dripping water or outside • If your washer is approved for installation in an alcove weather conditions.
- Page 17 Installation Instructions CONNECT WATER HOSES TO OUTLET CONNECT WATER HOSES TO WASHER VALVES Disconnect electrical cord before installing water hoses. If not installed, install rubber washer in one end of hot water hose. Determine which is HOT water line before attaching water Thread hot water hose onto connection labeled H at top rear of hoses to faucets.
- Page 18 Installation Instructions Pull the drain hose out from top to proceed with CONNECT TO DRAIN installation The drain or standpipe must be capable of accepting a Hose discharge at a rate of 16 gal per minute. The drain height must be 30” minimum and 96” maximum. The standpipe diameter must be 1-1/2”...
- Page 19 Installation Instructions ELECTRICAL REQUIREMENTS GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of WARNING - Fire Hazard malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance Plug into a grounded 3-prong outlet. for electric current.
- Page 20 Before you call for service…Troubleshooting Tips Save time and money! Review the charts on the following pages, or visit GEAppliances.ca. You may not need to call for service. WATER Possible Causes What To Do Small amount of water Normal dispenser It is normal for a small amount of water to remain in dispenser after the remaining in dispenser operation...
- Page 21 Before you call for service…Troubleshooting Tips Save time and money! Review the charts on the following pages, or visit GEAppliances.ca. You may not need to call for service. WATER Possible Causes What To Do Water pumped out Lid lifted or cycle was put Reset cycle.
- Page 22 Before you call for service…Troubleshooting Tips PERFORMANCE Possible Causes What To Do Incorrect use of fabric Check fabric softener package for instructions and follow directions for Colored spots softener using dispenser. Make sure you have selected the Deep Rinse option. Pretreat stain and rewash using Speed Wash cycle before drying.
- Page 23 Before you call for service…Troubleshooting Tips SOUNDS Possible Causes Reason “Clicking” Shifter mechanism is The drive system will engage at the start of agitate and disengage when engaging or disengaging agitate is complete. This occurs multiple times during the wash. Back and forth Electric motor reversing This sound is the motor rotating back and forth to clean your laundry.
- Page 24 Canada. If the product is located in an area where service by a GE Authorized Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Service location.
-
Page 25: Consumer Support
Contact Us GEAppliances.ca In Canada: If you are not satisfied with the service you receive from GE, contact us on our Website with all the details including your phone number, or write to: Director, Consumer Relations, MC Commercial Suite 310, 1 Factory Lane Moncton, N.B.