Using your notebook
Using power saving modes
When you use a battery as the source of power for your computer, you can take advantage of power
management settings to conserve battery life. In addition to the normal operating mode, which allows you
to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate.
When using battery power, you should be aware that the computer automatically enters Hibernate mode
when the remaining battery charge drops below 7 percent, regardless of the power management setting
you select.
If the battery level falls below 10 percent, you should either attach the AC adapter to recharge the battery or shut down your computer and insert a
fully charged battery.
Using Normal mode
This is the normal state of your computer when it is in use. The green power indicator light is on in this mode.
To save power while not working, you can turn off a specific device such as the LCD or the hard disk.
Using Standby mode
Standby mode turns off the LCD screen and sets the hard disk and the CPU to a low power consumption
mode. The umber power light flashes in this mode.
To activate Standby mode, proceed as follows:
Press the <Fn> and <Esc> keys simultaneously.
Alternatively,
1
Click Start and then Turn Off Computer.
2
In the Turn off computer screen, press Standby.
The computer enters Standby mode.
n N
59