Table of Contents
Advertisement
Connecting peripheral devices
Selecting display modes
This notebook uses the Intel
used when the notebook is connected to an external device.
To connect an external display, proceed as follows:
1
Connect the external device to the Monitor/VGA connector on the left side of the computer.
2
Press and hold the <Fn> key and press the <F7> key to change the destination.
The output destination changes every time you press the <F7> key while holding the <Fn> key.
The output destination options are listed below:
• LCD only: Displays contents on your computer's LCD only.
• LCD only + MONITOR (VGA): Displays contents simultaneously on your computer's LCD and the
external display*.
• MONITOR (VGA): Displays contents on the external display only*.
• Setup: Displays the resolution setting window for the external display.
The image appears on the external display.
To set up the video controller options, proceed as follows:
1
Click Start, then Control Panel.
The Control Panel appears.
2
Double-click Appearance and Themes, and then select Display.
The Display Properties dialog box appears.
3
Click the Settings tab.
4
Click the Advanced button and choose the Intel
Then choose the Graphics Properties icon.
5
Click the Devices tab.
Select the Monitor, Notebook, Intel
6
Click Apply and then OK.
®
855 GM Integrated Graphics video controller. You can select which display is
®
Dual Display Clone or Extended Desktop icon.
®
Extreme Graphics tab.
n N
89
Advertisement
Table of Contents
