Table of Contents
Advertisement
Available languages
Available languages
Parts supplied
Use and maintenance manual.
Intended use
The tool has been designed for cutting and pruning according to the above-described manners and limits.
Any different use is not allowed. Examples of different use is cutting objects made of metallic or rubber materials, fabrics,
synthetics, meat or food, stones, pieces of cement, glass or glass compounds, carbon fibre.
•
Any other use has to be considered improper and potentially dangerous for the operators' safety. This would
make any warranty claims void.
•
If it is not used for the purposes it was designed for, the tool may cause serious injuries to personnel and
bystanders and damages to equipment and things.
Tool composition
Pos.
Denomination
1
Identification sticker
2
Shear body
3
Operating lever
4
Moving blade
5
Operating lever safety catch
6
Hand guard
7
Fixed Blade
8
Blades fixing screw
9
Conrod pin
10
Blade pin
11
Piston group
12
Piston spring
13
Piston seal
14
Nut
15
Extension pole connection
16
Fitting
17
Front cover
18
Front cover fixing screws
Fixed extension pole
19
20
Telescopic extension pole
21
Extension pole grip
Technical data
Cutting diameter .......................................................................................... 40 mm
Weight ........................................................................................................... 675 g
Working pressure ...................................................................... 1000 kPa (10 bar)
Max. air consumption ............................................................................... 1.0 l/min
Safety devices
•
The safety catch (5) engages itself automatically by releasing the operating lever (3) and prevents the tool from
starting up accidentally.
•
The guard (6) protects the operator's hand from blows.
Use and maintenance manual – Translation of
original Instruction Rev.: 01, Date 10/11/2021
Function
Shows the product identification details
Allows to hold the shears
It is pressed to operate the shears
Is the cutting blade
Prevents any accidental tool operation
Protects the hand from blows and the operating lever from any
accidental tool operation
Is the blade supporting the branch to be cut
Locks the blade group
Joins the conrod to the moving blade
Is a fulcrum and locks the blade group
Transmits the cutting force
Is the piston return spring
Is the piston air seal
Locks the seal on the piston
Joins the shear to the extension pole
Connects the shear to the mains
Protects the conrod
Fix the front cover on the shear body
Holds the tool and makes it easier to work from the ground
Holds the tool and makes it easier to work from the ground
Grip and shear drive valve
Ref.
A
B-D-G
M
B-C-N
M
M
B-C-N
B
C
B-C
F-G
G
F
F
B-D-E-G-H
L-M
B
B
O
O
O
Page 23
Advertisement
Chapters
Table of Contents
