Sony STR-DN1080 Manual page 150
Multi channel av receiver
Hide thumbs
Also See for STR-DN1080:
- Operating instructions manual (68 pages) ,
- Service manual (98 pages)
Advertisement
Select the desired speaker pattern according to the speaker installation example
3
displayed on the TV screen, then select [Save].
Select the setting you want (*).
4
Off: When none of the following connections is used.
Front B: When using the front B speaker connection.
BI-AMP: When using the bi-amplifier speaker connection.
Zone2 (for European and Asia-Pacific models only): When using the Zone 2
connection.
*
The displayed settings vary depending on the speaker pattern you selected.
Note
You can only set [Surround Back Speaker Assign] under the following conditions:
The speaker pattern is set to a setting without surround back and height/overhead speakers.
Headphones are not connected.
[Bluetooth Mode] is set to other than [Transmitter].
[164] Adjusting Settings
Selecting the speaker pattern (Speaker Pattern)
You can select the speaker pattern you want according to your speaker installation.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Speaker Pattern].
2
Select the speaker pattern appropriate to your speaker configuration under
3
[Listener-level Speakers] by referring to the speaker installation example displayed
on the TV screen.
Select the speaker pattern appropriate to your speaker configuration under
4
[Height/Overhead Speakers] by referring to the speaker installation example
displayed on the TV screen.
Select [Save].
5
Note
This function does not work in the following cases:
Headphones are connected.
[Bluetooth Mode] is set to [Transmitter].
Speaker Settings
Advertisement
