Table of Contents
Advertisement
I I ntralogistics (separator)
Trigger by light barrier on DI
Distributed small gate
Figure 4-2
Scenario: Intralogistics (separator)
In this example scenario, items must be distributed to the correct storage location in a
transport container via a separator. The transponders attached to the transport containers
are always evenly aligned. The transponders in this scenario are transponders of the type
SIMATIC RF630L. The conveyor belt has a maximum width of approximately 80 cm in this
example. The maximum transport speed of the conveyor belt is 2 m/s.
In this scenario, a SIMATIC RF615R with a SIMATIC RF650A and a SIMATIC RF610R
external antenna are used as the readers. These readers are inexpensive and feature a very
compact design.
When a transport container passes the light barrier
the transponder on the transport containers and forwards it to the SIMATIC S7 controller.
The SIMATIC S7 controls the separator
transponder information.
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
4.2 Possible system configurations
Separator setting by means of DQ
Individual read point
, the reader reads the information from
of the conveyor system depending on the
RF600 system planning
35
Advertisement
Table of Contents
