Table of Contents
Advertisement
SC-P600
Class
Adjustment Items
PG Adjustment
Head ID Input
Head angular adjustment CR / PF
Print Head / CR related
Bi-D adjustment
CR motor heat protection control
Colorimetric calibration
APG Function check
CR Belt check
CR encoder check
Mist Recovery check
Waste Ink Pad Counter
Ink charge
Ink Supply related
Ink Selector Check
EEPROM Data Copy
Boards related
Initialize Setting
MAC address Input
Adjustment
Purpose
To secure the specified clearance between the print surface of the
Printhead and paper, and adjust the parallelism of the 0-digit and
130-digit sides in order to maintain the print quality.
To correct characteristic variation of the replaced Printhead by
entering its Printhead ID (Head ID).
To correct the head angular (in CR/PF direction) when installing
the Printhead.
To correct print start timing in bidirectional printing through
software control.
To measure and correct the electrical variation of the motor and
the power supply board.
To register the Color ID to ensure consistent color quality.
To rotates the APG motor to change the PG, and see if the PG is
correctly set to its home position.
To move the CR Unit, and check if the movement is correctly.
To check the CR Scale for any abnormality such as damage or dirt
and check if the scale can be properly read by the encoder
To confirm the voltage applied to the plate under the Front Paper
Guide Assy is proper for ink mist recovery inside the printer.
To reset the waste ink counter after replacing the Waste Ink
Pad.*1
To fill ink inside the new Printhead to make it ready for print after
replacing the Printhead.*2
To check the operation of the ink selector correctly.
To copy adjustment values or the like stored on the old Main
Board to the new board when the Main Board needs to be
replaced.
To write sales-destination-specific settings and the serial number
into the Main Board after replacing it.
To input the MAC address if the data in EEPROM cannot be read
out.
Table 2-3. Adjustment Items
Printout pattern
---
See
---
OK
See
details.
OK
NG
NG
OK
Examine the printout patterns, and enter the value for the
pattern with no gap and overlap.
NG
NG
---
See
---
---
---
---
---
See
---
---
See
---
---
---
See
Required Adjustments
Hoe to judge
" 2.3.4 PG Adjustment (p49)"
for the details.
---
" 2.3.7 Head Angular Adjustment CR/PF (p55)"
for the
---
" 2.3.8 Colorimetric Calibration (p57)"
for the details.
---
---
---
" 2.3.5 Mist Recovery check (p53)"
for the details.
---
---
" 2.3.9 Ink Selector Check (p69)"
for the details.
---
---
" 2.3.6 Initial setting (p54)"
for the details.
Revision D
Service Program
Tool
---
Adjustment gauge
O
---
O
---
O
---
O
---
See
" 2.3.8 Colorimetric
---
Calibration (p57)"
for the details.
O
---
O
---
O
---
O
---
O
---
O
---
O
---
O
---
O
---
O
---
37
SE Group Confidential (Related Staff Only)
Hide quick links:
Advertisement
Table of Contents
