Related Manuals for Bosch CM368B
Summary of Contents for Bosch CM368B
- Page 1 CM368B IP Combo Module - 4G LTE CAT 1 Security Systems Installer Reference Guide Security System...
-
Page 2: Getting Started
There are four main steps required to configure the show the current signal condition. CM368B for reporting to the control room. The instruc- tions assume that you already have purchased a SIM card and that the card has been charged with credit and acti- Experiment with the position of the antenna to find the vated on the network if necessary. - Page 3 Supported Reporting Formats numbers via SMS. Version 2.51.04 of the Solution 6000 panel firmware is required to support the CM368B. All reporting scenarios are configured by varying the pro- gramming of the reporting format and reporting routes The following reporting formats are currently supported configurations options.
- Page 4 Access Number Enter the communication providers access number for SIM card balance enquiries. Scan Here (iOS Version) • Optus = 9999 • Vodafone = 1555 / 1512 • Telstra = #100# • Virgin = 225 Bosch Security Systems 03/21 CM368BIRG FTR1.0...
- Page 5 CM368B Installer Reference Guide Text GPRS Using The CM368B 4G Radio Enter the text required by the communication providers The APN Server Name, APN User Name and APN Password to obtain your SIM card balance (Max = 16 characters). In menu’s need to be configured before the 4G radio can...
- Page 6 <User Code>,DOOR,1,2,3,STATUS Check System Status <User Code>,SYSTEM,STATUS SIM Balance Check - Must have been configured under site settings Check Current SIM Balance <User Code>,SIMBAL,<Access Number>,<Text., <Preamble>,<Min Amount>,<Days>,<Mobile>,<Expire Reminder> Table 5: GSM SMS String Commands Bosch Security Systems 03/21 CM368BIRG FTR1.0...
- Page 7 “Figure 1: CM368B Module Installed On Solution 6000” on page 2. If you are connecting the CM368B to a panel which also has a CM101B Voice Mod- ule fitted then you should use the longer standoffs from the HW750 Riser Kit.
- Page 8 Figure 4: Customer Panel Form Press the OK button and the assistant will begin scan- ning the private network LAN for the presence of CM368B modules. If more than one module is found, select the one from the list whose MAC address matches the one you are installing and press the OK button.
- Page 9 Go to the Ethernet Module section in the Devices tab and uncheck the “Obtain IP Address Automatically” option Figure 11: Configuring the Transmission Format then enter the IP Address of the CM368B, the Subnet Mask and the Default Gateway in the fields provided and then save the changes.
- Page 10 07701 (default IP RAS Port) incoming connections from a specific IP Address. In the to the internal IP address of the CM368B which is pro- default state the RAS IP Address is set to 000.000.000.000 grammed in MENU 6-6-0 on the Solution 6000.
- Page 11 Optional AN110 High Gain Outdoor Antenna configured to reserve or lock down the IP Address which was assigned to the CM368B module when it was first For installations where adequate signal strength is not connected to the LAN. See the Module IP Address loca- available using the supplied indoor antenna, an optional tion which is MENU 6-6-0 on the Solution 6000 panel.
-
Page 12: Customer Details
Installer Reference Guide CM368B Customer Details Use this section to record the customer details for this CM368B module. This information may also be required when seeking technical support. Customer Name:: Module Serial No: MAC Address: IP Address Public: IP Address Private:... -
Page 13: Specifications
Quad Band Omni Directional with Magnetic Mount, integrated lead and SMA Connector. Antenna: 3dbi gain - 50 ohm The CM368B is mounted directly to the expansion port on the control panel PCB. Two Module Connection: plastic standoffs are supplied to support the module and these should be connected to the control panel before installing the CM368B. - Page 14 Bosch Security Systems Level 2, 21 Solent Circuit Baulkham Hills, NSW 2153 Australia Phone: 1300 026 724 RoHS www.boschsecurity.com.au © 2021 Bosch Security Systems BLCC368BIRG Issue FTR1.0...