Contents Introduction..............2 Troubleshooting............18 Safety................3 Transportation, storage and disposal......18 Assembly..............13 Technical data.............. 18 Operation..............15 Accessories..............20 Maintenance..............17 EC Declaration of Conformity........21 Introduction Product overview 1. Backpack harness Work is constantly in progress to increase your safety and efficiency during operation.
Symbols on the product Warning! The blower can be dangerous! Start/Stop button Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator's manual.
Page 4
instructions in the started by accident. Always disconnect the battery before manual are not obeyed. any maintenance on the machine. CAUTION: Used if there Before using the machine and • is a risk of damage to the after any impact, check for product, other materials signs of wear or damage and or the adjacent area if...
Page 5
• This appliance is not intended or long hair can be caught in for use by person (including moving parts. children) with reduced • Never use the machine if you physical, sensory or mental are tired, if you have drunk capabilities, or lack of alcohol, or if you are taking experience and knowledge,...
Page 6
specialists. See instructions • Incorrect or careless use of under the heading the product can turn it into a Maintenance. dangerous tool that can cause serious or even fatal injury to • Only use original spare parts. the operator or others. You •...
Page 7
medical implant manufacturer there is a risk of serious before operating this product. personal injury. Stop the product immediately if anyone • Remove the battery from the approaches. Never swing the product during charging. product around without first Safety instructions for operation checking behind you to make sure that no one is within the WARNING: Read the...
Page 8
• Use the product with the rubbish into someone's lowest possible airflow. It is garden. seldom necessary to use full • Do not run with the product. airflow, and many work • The powerful currents of air procedures can be done at can move objects at such a half airflow.
Page 9
• The product must not be used numbness, loss of feeling, while on a ladder or tingling, pricking, pain, loss of scaffolding. strength, changes in skin color or condition. These symptoms normally appear in the fingers, hands or wrists. • Only use the product for the purpose it was intended for.
Page 10
you use the product. Personal USAs or EN 166 in EU protective equipment cannot countries. fully prevent injury but it decreases the degree of injury if an accident does occur. Let your dealer help you select the right equipment. • Long term exposure to noise can result in damaged •...
Page 11
and how checks and professional repairs and maintenance should be carried service. If the retailer who sells out to ensure that it operates your product is not a servicing correctly. See instructions dealer, ask him for the Introduction under the heading address of your nearest on page 2 to find where these service agent.
Page 12
To do a check of the power trigger • Push and release the power trigger to make sure that it moves freely. To use the quick release function If an emergency occurs, remove the backpack blower quickly. Harness safety 1. Push the clips and remove WARNING: Read the the straps.
• Remove the battery before • If you do not do maintenance, you do maintenance, other it decreases the life cycle of checks or assemble the the product and increases the product. risk of accidents. • The operator must only do the •...
Page 14
6. Align the knobs (J) to each side of the joint swivel 13. Attach the cable clamp to the flexible tube. Put the (H). cable of the control handle in the loop on the cable clamp. 7. Attach the control handle (I) to the guide track (K) of the joint swivel (H).
WARNING: Read and understand the safety chapter before you use the product. To connect the battery to the product WARNING: Only use Husqvarna original batteries in the product. 1. Charge the battery fully. 2. Push the battery into the battery holder of the backpack.
Page 16
Automatic shutdown function 3. Continue to operate with the selected airflow without the power trigger pushed. The product has an automatic shutdown function that 4. To increase the airflow, push the power trigger. stops the product if it is not used. The product shuts When the power trigger is released, the airflow goes down after 30 minutes.
Maintenance Introduction WARNING: Before you do any maintenance work you must read and understand the safety chapter. Maintenance schedule Maintenance Daily Weekly Monthly Clean the external surfaces of the product with a clean and dry cloth. Do not use water. Keep the handles dry and clean.
Disposal of the battery, battery charger and product The symbol below means that the product is not domestic waste. Recycle it at a recycling station for Technical data Technical data 340iBT Motor Motor type BLDC (brushless) 36V Weight 1166 - 002 - 29.10.2019...
Page 19
Maximum blow force in normal mode with round standard nozzle, N Maximum blow force in Boost mode with round standard nozzle, N Noise and vibration data are determined on the basis of the rated maximum speed. Approved batteries Only use original Husqvarna BLi for this product. Battery BLi200 Type...
EC Declaration of conformity Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the battery backpack blower Husqvarna 340iBT from 2019’s serial numbers and onwards (the year is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL’S DIRECTIVES:...