Advertisement
INSTRUCTION MANUAL
D1xC3 Alarm Bar
3 Beacons and Alarm Horn
1) Warnings
Please see individual product instruction manual. See Table
1 for Instruction Manual Document Number.
2) Rating & Marking Information
Please see individual product instruction manual. See Table
1 for Instruction Manual Document Number.
All individual unit ratings must be suitable for the installation.
3) Type Approval Standards
Please see individual product instruction manual. See Table
1 for Instruction Manual Document Number.
4) Installation Requirements
Please see individual product instruction manual. See Table
1 for Instruction Manual Document Number.
5) Special Conditions of Use
Please see individual product instruction manual. See Table
1 for Instruction Manual Document Number.
Component
Component Description
Part Code
Reference
D1XB2X05
5J Xenon Strobe Beacon
D1XB2X10
10J Xenon Strobe Beacon
D1XB2X15
15J Xenon Strobe Beacon
D1XB2LD2
LED Beacon
D1XS1
Alarm Horn Sounder
D1XS2
Alarm Horn Sounder
Table 1: Product Instruction Manual Reference
_______________________________________________________________________________________________________________________________
European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH
Document No. D226-00-145-IS_Issue_4
6) Part Coding
Part Code:
Product Type
Junction Box
Beacon Type
(Add Code for each
Beacon in Alarm Bar)
Sounder Type
Voltage
Cable Entries [e]
Stopping Plug /
Adaptor Material [m]
Guard / Tag Material
[s]
Document
Number
Product Version [v]
D191-00-201-IS
D191-00-401-IS
Product Option [o]
D190-00-001-IS
D190-00-101-IS
Assembly Colour [x]
20/04/2023
Sheet 1 of 5
Beacon 3
Beacon 2
Beacon 1
Identifier - Description
D1xC3
N2 = No Junction Box
1Y = D1xB2X05
2Y = D1xB2X10
3Y = D1xB2X15
5Y = D1xB2LD2
Where Y = Lens Colour, choose from:
A = Amber, B = Blue, C = Clear, G = Green,
M = Magenta, R = Red, Y = Yellow
S1F = D1xS1 Flare Sounder
S1R = D1xS1 Radial Sounder
S2F = D1xS2 Flare Sounder
S2H = D1xS2 Large Flare Sounder
DC024 = 24Vdc
AC115 = 115-120Vac 50/60Hz
AC230 = 220-230Vac 50/60Hz
A = 1 x M20x1.5mm + 1 x M20 (Adaptor)
B = 2 x 1/2" NPT (Adaptors)
C = 1 x 3/4" NPT + 1 x 3/4" NPT (Adaptor)
D = 2 x M25x1.5mm (Adaptors)
E = 1 x 1/2" NPT (Adaptor) + 1 x M20x1.5mm
F = 1 x 1/2" NPT (Adaptor) + 1 x 3/4" NPT
G = 1 x M25x1.5mm (Adaptor) + 1 x M20
M = 1 x 3/4" NPT + 1 x M20x1.5mm – Default
B = Brass
N = Nickel Plated
S = Stainless Steel
1 = 316 St.Steel Guard & 316 Tag
2 = As (1) with Traffic Light Cowl
3 = 316 St.Steel Guard, 316 Tag & Duty Labels
4 = As (5) with Traffic Light Cowl
5 = 316 St.Steel Guard, 316 Tag & Duty Labels
attached by steel wire
A = IECEx/ATEX/UL/cUL Class I Zone 1
B = IECEx/ATEX
C = UL/cUL Class Div 1
1 = Standard Wiring (Positive Switching)
2 = Independent Wiring (Stage 1 Only)
3 = Alt. Standard Wiring (Negative Switching)
5 = Beacons & Sounder Linked w/ Line Monitoring
6 = Independent Wiring w/ Line Monitoring
W = Special Wiring
X = Special Configuration
R = Red, G = Grey
Other colours also possible, contact E2S sales
www.e2s.com
Tel: +44 (0)208 743 8880
Advertisement
Table of Contents
Related Manuals for E2S D1xC3
Summary of Contents for E2S D1xC3
- Page 1 W = Special Wiring X = Special Configuration R = Red, G = Grey Assembly Colour [x] Other colours also possible, contact E2S sales _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No.
-
Page 2: Location And Mounting
The D1XC3 Alarm Bar should be secured to any flat surface using ten Ø7mm fixing holes in the mounting plate. See figure In order to connect the electrical supply cables to the beacon, it is necessary to open the explosion proof enclosure. -
Page 3: Cable Connections
14) Interchangeable & Spare Parts The Alarm Bar is provided with an M6 earth screw on the The Beacon lens cover is interchangeable, contact E2S Ltd mounting plate. Earthing connections should be made to the for a replacement lens cover available in various colours. -
Page 4: Maintenance, Overhaul And Repair
Beacons can be configured with a traffic light cowl to enhance visibility. Figure 8 shows the optional Traffic Light Cowl pre-assembled to the Beacon by E2S. Fig. 8: Traffic Light Cowl To disassemble the cowl, loosen the M6 Nut using a spanner or wrench and carefully remove from the beacon lid casting. - Page 5 Table 3 – Summary of Wiring Options NOTE: Please see schematic document D226-06-145 for line monitoring details. _______________________________________________________________________________________________________________________________ European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D226-00-145-IS_Issue_4 20/04/2023...
- Page 6 DC STAGE SWITCHING WAS -VE NOW +VE. SOUNDER Note: Alternative wiring configurations may 3 BEACONS & ALARM HORN TERMINALS UPDATED TO NEW PCBA. DAH - 22-09-2021 be available on request - contact E2S sales CONFIG 1-5 ADDED ; SH 2 ADDED DAH - 20-04-2023 DC VOLTAGE SUPPLY DC VOLTAGE SUPPLY CONFIG.
- Page 7 IS THE COPYRIGHT PROPERTY OF EUROPEAN SAFETY DO NOT SCALE MATERIAL warning signals ANGULAR DIMENSIONAL TOLS SYSTEMS LTD. NEITHER THE WHOLE OR ANY EXTRACT MAY D1xC3 STACK - 3 BEACONS & ALARM TITLE CHECKED DATE BE DISCLOSED, LOANED, COPIED OR USED FOR EUROPEAN SAFETY SYSTEMS LTD...
- Page 8 IS THE COPYRIGHT PROPERTY OF EUROPEAN SAFETY DO NOT SCALE MATERIAL warning signals ANGULAR DIMENSIONAL TOLS SYSTEMS LTD. NEITHER THE WHOLE OR ANY EXTRACT MAY D1xC3 STACK - 3 BEACONS & ALARM TITLE CHECKED DATE BE DISCLOSED, LOANED, COPIED OR USED FOR EUROPEAN SAFETY SYSTEMS LTD...