Advertisement
The Honeywell InSight™ Series Air Purifier delivers powerful HEPA filtration and features a cutting-edge design that provides valuable indoor air quality information from a distance.
Pre-Filter
Helps capture VOCs, odors and larger airborne particles
Enhanced Odor & VOC Filter (Optional)
Helps reduce odors and Volatile Organic Compounds (VOCs) from pets, kitchens, smoke, or home renovation (sold separately)
Certified HEPA Filter
Captures the following microscopic airborne allergens and particles: dust, pollen, pet dander, dust mite debris and smoke as small as 0.3 microns from the air that passes through the filter
To help ensure stated product performance, use only Certified Honeywell Replacement Filters. You can purchase Genuine Honeywell Filters at the retailer where you purchased your air purifier or order directly from www.HoneywellPluggedIn.com.
Pre-Filter
Models:
HRF-AP1 (Odor Reducing)
HRF-APP1 (VOC & Odor Reducing)
HEPA Filter
Models:
HRF-G1 (One pack)
HRFG2 (Two pack)
Enhanced Odor & VOC Filter (Optional)
Models:
HRFTS1 (Smoke)
HRFTK1 (Kitchen)
HRFTC1 (Home Renovation)
HRFTP1 (Pet)
The energy efficiency of this ENERGY STAR certified model is measured based on a ratio between the model's CADR for Smoke and the electrical energy it consumes, or CADR/Watt.
This product earned the ENERGY STAR label by meeting strict energy efficiency guidelines set by the U.S. EPA. Room air cleaners have demonstrated the potential for improving air quality and providing health benefits. EPA does not endorse manufacturer claims regarding the degree to which a specific product will produce healthier indoor air.
TURBO MODE
When Turbo mode is selected , the air purifiers will operate at the highest cleaning level and maximizes its ability to help clean the air and help reduce odors and VOCs quickly. Tapping the Turbo button again will return the air purifier to the previous cleaning setting.
AUTOMATIC CLEANING MODE & AIR QUALITY INDICATOR
These air purifier models are equipped with VOC Sensors that detect the level of VOCs in the room and provide a visual display to indicate air quality. The Air Quality Indicator color display is located on the InSight Display. The VOC Sensor is constantly monitoring the air and the Air Quality Indicator light will illuminate either green, yellow, or red depending on the level of VOCs detected in the room:
Green – Good air quality. There is a low level of VOCs detected.
Yellow – Moderate air quality. There is a moderate level of VOCs detected.
Red – Poor air quality. There is an elevated level of VOCs detected.
VOCs are gases that are emitted from certain household cleaning, home improvement, and even common home decor products.
When the Auto mode is activated, the air purifier will automatically operate at the appropriate cleaning level to reduce the VOCs that are detected in the room. To select this mode, tap the Auto button and the icon will illuminate on the control panel to indicate the setting has been activated.
NOTE: Upon start up, the unit may take a few minutes to calibrate and measure the air quality. During this time, the Air Quality Indicator will pulse between green, yellow, and red until the air quality is determined. When the appropriate reading is determined, the indicator will then remain a solid color.
The Timer option allows you to select how long the air purifier will run before it automatically shuts off. There are three pre-set run times: 2, 4, and 8 hours. Do not use this option if you want the air purifier to run continuously. To set the timer, tap the Timer button until the desired setting (2, 4 or 8 hours) is illuminated. To exit the Timer mode, tap until the Timer button light shuts off.
The Dimmer option allows you to adjust the brightness of the LEDs on the control panel and the InSight Display. This is helpful if you are looking to adjust the brightness depending on the time of day that the unit will be used. To adjust brightness, tap the Dimmer button once to dim the lights to LOW. Tap the button twice and it will shut the lights OFF. Please note that the dimmer button will remain on at 20% illumination and will not completely shut off so that the unit can be located in a dark room. All of the the other lights will shut off. Tap the Dimmer button a third time to return the brightness to HIGH.
These air purifier models each have two electronic filter checks to remind you when it is time to replace the Pre-Filter, Optional Enhanced Odor and VOC Filter(s), and HEPA Filter(s) based on the air purifier's hours of use. When it is time to replace the filters, one of the filter icon lights will illuminate above the Filter Check/Reset indicator light to identify which filter needs to be replaced at that time. For more detailed information, see the next section.
When the Filter Reset indicator light(s) illuminate(s), it is time to replace one or more of the filters.
Indicator Light | Filter* | When to Replace | Number of Filters Needed |
Pre-Filter: Honeywell A or A+ Pre-Filter | Every 3 months |
| |
Optional Enhanced Odor & VOC Filter: Honeywell T Filter T Filter |
| ||
Honeywell HEPA G Filter G Filter | Every 12 months |
|
*For specific filter models, reference the Replacement Filters section of this manual.
See the Getting Started section for filter replacement instructions.
To help ensure stated product performance, use only Certified Honeywell Replacement Filters. You can purchase Genuine Honeywell Filters at the retailer where you purchased your air purifier or order directly from www.HoneywellPluggedIn.com.
These replacement intervals are intended as guidelines only. Performance of any filter media is dependent upon the concentration of particles going through the system. High concentrations of particles such as dust, pet dander, and smoke will reduce the useful performance of the filters.
NOTE: The Pre-Filter, Enhanced Odor & VOC Filter and HEPA Filters are NOT washable and should NOT be vacuumed.
DO NOT immerse them in water.
Filters may be harmful if ingested. Avoid breathing dust when changing filters.
After you have replaced the appropriate filters, plug the unit back in. The Pre-Filter/Enhanced Odor and VOC Filter and/or HEPA Filter Reset Light will remain on until it is reset.
Pre-Filter and Enhanced Odor & VOC Filter Reset:
| |
HEPA Filter Reset:
|
We recommend that you clean the air purifier at least once every 3 months and before extended storage. Use only a dry cloth to wipe the external surfaces of the air purifier.
DO NOT USE WATER, WAX, POLISH, OR ANY CHEMICAL SOLUTION.
If your Air Purifier will not be used for more than 30 days, we recommend that you:
My Air Purifier is starting to make noise and the air output is less. What's wrong?
The filters may be dirty. High amounts of particles can block the pores in the filter and stop the air from moving through it. Replace the Filters. The HEPA Filters should be replaced every year and the Pre-Filter and Enhanced Odor and VOC Filters should be replaced every 3 months. Please note these are guidelines only and filters should be checked periodically as individual home conditions may vary. To help ensure the unit is performing properly, replace with Certified Genuine Honeywell Filters.
How long should I run my Air Purifier?
In general, the unit will be most effective when doors and windows are closed. It is recommended that you run your air purifier while you are at home to help clean the air. If desired or conditions warrant, you may run your air purifier 24 hours a day.
Can I wash any of the filters in my Air Purifier?
No. Washing the filters will ruin them.
What are VOCs?
Volatile Organic Compounds (VOCs) are emitted from various solids and liquids such as paints, cleaning supplies, building materials, and permanent markers. Some of these compounds can have higher concentrations indoors than outside.
Why did my Air Purifier suddenly turn on a higher setting?
Is the air purifier set to Automatic Cleaning Mode? If it is, the unit may have sensed a higher level of VOCs and has adjusted the cleaning level accordingly.
We are here to help answer any questions you may have about this product.
Call us toll-free at: 1-800-477-0457 or visit our website at: www.HoneywellPluggedIn.com/contact-us,
in Canada: www.HoneywellPluggedIn.ca.
Please be sure to specify the model number of the unit you are contacting us about. The model number is located on the bottom of the unit.
If you have any questions about the operation of this product, please call us toll-free at 1-800-477-0457 or visit our website at: www.HoneywellPluggedIn.com/contact-us.
READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS AIR PURIFIER
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
To Reduce The Risk of Fire or Electric Shock, Do Not Use This Air Purifier With Any Solid-State Speed Control Device.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Honeywell HPA080, HPA180 - InSight Series HEPA Tower Small Air Purifier Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the InSight HPA080 Series that isn't answered in the manual? Leave your question here.