Table of Contents
Advertisement
Before adjusting parameters, play back the program
source. You can adjust parameters while listening to
the actual sound.
djusting the Main Parameters
1 Press SURROUND ON/OFF to ON.*
2 Press PARAMETER
MAIN until the desired
parameter appears in the display. (Once you press
MAIN, you can select the desired parameter by
pressing Aor V.)
3 Adjust the parameter by pressing
<I or >.
Tips for adjusting the main parameters
The following procedure allows you to make the
desired sound field more effectively.
1 Select the desired factory-preset sound field
program.
2 Adjust the Effect Level.
3 Adjust the Reverberation time.
4 Adjust other parameters, if necessary.
Note
*If the surround function is not turned on, "surround
off!" appears after you finish adjusting parameters.
Simulating the Room Size
The sound emitted from a sound source is reflected
many times between the left and right walls, ceiling,
and floor before it reaches our ears. In a large room,
the sound takes more time to bounce from one surface
to another than in a smaller room.
The ROOM
parameter controls the spacing of early
reflections to simulate the room size. The S indicator in
the display signifies a small! room, the L indicator signi-
fies a large room, and the middle point designates the
standard room size.
Room Size S
Level
Early reflections
_a_
>
Time
Room Size L
l
Level
Early reflections
Time
33
Advertisement
Table of Contents
