Table of Contents
Advertisement
FUNCTION MENU
3 Press " " to lower the grille until it's lowered to the set
distance.
If it is necessary to further lower the grille (more than the set
•
value), press " " again.
Each press lowers the grille by 20in (50cm).
•
Pressing " " can stop the grille at any position while it is
•
lowering.
5.12 FILTER REMINDER RESET SETTING
This function is used to turn off the filter reminder indication and
to reset the time of use for the filter.
1 Select "Reset Filter Reminder Time" on the "Function Menu"
screen and press "OK".
2 Press " " or " " to select "Yes", and then press "OK".
The screen returns to the "Function Menu" screen depending
•
on the type of the indoor unit.
27
PMML0601 rev.0 - 07/2022
4 After cleaning the air filter, install the air filter and press " " to
raise the grille. Once the grille is stored inside the unit, it will
stop after approximately 3 seconds.
If the grille is tilted when stored, press " " again until the tilt
•
is corrected.
Pressing " " can stop the grille at any position while it is
•
raising.
5 Press" " to return to the indoor unit selection screen.
To operate other indoor units, perform the operations of
above Step2.
To end the operation, press " " again to return to the
"Function Menu" screen.
•
If there is only one indoor unit, the screen returns to the
"Function Menu" screen.
3 Press "OK" and the screen returns to the "Function Menu"
screen.
Advertisement
Table of Contents
