Table of Contents
Advertisement
FUNCTION MENU
5.14 INDIVIDUAL LOUVER SETTING
This function is to individually set the air direction of multiple air
outlets.
?
N O T E
This function is available when the indoor unit supports individual
•
louvers.
It cannot be set while the air conditioner is stopped.
•
The fan speed changes to "LOW" while this function is being set. After
•
the setting is completed, the unit operation is back to normal.
As for "Start-up of Heating Operation", "During Defrost Operation"
•
and "Activation of Thermo-Controller", all the louver angles are
automatically secured horizontally when this function is activated.
This function is not available if two remote controllers (including a
•
combination of wired controller + wireless controller) are used.
1 Select "Individual Louver Setting" on the "Function Menu"
and press "OK".
2 Select "Individual Louver Setting" and press "OK".
?
N O T E
If there is one indoor unit connected with the controller, Step4 is displayed.
34
PMML0601 rev.0 - 07/2022
3 Press" ", " ", " ", or " " to select the indoor unit to change
the louver direction, and press "OK".
?
N O T E
The indoor unit displayed on the screen flashes if an individual louver is
set.
4 Press " " or " " and select the louver from 1 to 4.
The selected louver is opened while the unselected louvers
are closed.
5 Press" " or " " to select the louver angle and press "OK".
Return to Step3.
The louver angle is changed as follows.
Indv.
Indv.
Indv.
Indv.
6 Ensure that individual "Indv." is turned on at the Louver on
the home screen.
Indv.
Indv.
Indv.
Indv.
Swing
Advertisement
Table of Contents
