SERVICE & INSTALLATION MENU
Check 1
1 Select "Check 1" on the "Refrigerant Leak Sensor Setting"
menu and press "OK".
2 Press " ", " ", " ", or " " to select the indoor unit. Press "OK".
If there is only one indoor unit connected to the wired remote
controller, this screen is not displayed (the screen in Step 3
is shown).
3 Press " " or " " to change the page of check data.
By pressing and holding " " for 3 seconds or longer, the
items are displayed with a description, translated in the
selected language. The text displayed is for reference. Refer
to the technical resource for each indoor unit for details.
72
PMML0601 rev.0 - 07/2022
4 Press "OK" to get pass the information screen.
5 A list of items will be displayed with the corresponding item
description and its value. Short press " " to browse through
the items. By pressing " " once, the display returns to the
first items list screen. By pressing " " again the display
returns back to the "Check 1" screen.