Connecting - Siemens SIMOVERT FC Series Operating Instructions Manual

Masterdrives cbc - communication board can-bus

Table of Contents

Connecting

Connection of the

6SE7087-6NX84-0GB0

SIMOVERT MASTERDRIVES

The SIMOVERT MASTERDRIVES are operated with high voltages.

Any work on the unit may only be carried out by qualified personnel.

If this warning is ignored, serious injury or considerable damage to

property can occur as a consequence.

Because of the DC link capacitors, there continues to be dangerous

voltage in the unit until up to 5 minutes after disconnection. Therefore

the unit must not opened until at least this time has expired.

Even when the motor is at a standstill, the power terminals and the

control terminals can carry voltage. During work on the converter, it has

to be disconnected from the power supply.

When handling the opened converter, it must be kept in mind that live

components are exposed.

The CBL contains electrostatically sensitive components. These

components can very easily be destroyed by improper handling.

The CBL optional board has a 5-pin open connector (X708) which is

provided for connecting it up to the CC-Link bus.

Connections X708

Operating Instructions

Significance

Data noninverted

Data inverted

Cable shield

Field ground (additional)

Table of Contents