Replacement Of Ash Plate; Receiver Replacement - Nectre Fireplaces MK3 Operating Instructions Manual

Hide thumbs Also See for MK3:

Table of Contents

REPLACEMENT OF ASH PLATE

The ash plate acts to protect the front of the firebox below

the door opening from the hot coal bed and fire.

Over time, this may burn through in which case it should be

replaced to ensure the longevity of the firebox.

Clear ash away from the base of the ash plate. Remove the

old ash plate and replace with a new one. When positioning

the new ash plate, ensure that the front top edge is flush

against the inside edge of the firebox beneath the door

opening.

Over the life of the heater, the fan receiver may fail. If this

occurs, it will need to be replaced.

Unplug the power lead before proceeding.

To access the remote control receiver, remove the steel

box from underneath the unit.

Remove the fan cover. The M12 button screw

securing this can be removed with an 8mm hex key.

Remove the receiver mount screw (M8) with a 5mm

hex key. Receiver can then be pivoted forwards and

carefully removed from heater.

Unplug and swap fan receiver with replacement

receiver.

Reinstall the new receiver by repeating steps 1 and

2 in reverse.

M8 SCREW

Table of Contents