Advertisement
Disassembly Notice
Please be sure to pull out adapter and disconnect the battery.
Step 1 : Remove the screw *4pcs.
Step 2 : Remove the THERMAL MODULE.
Recommend that the force point is at green block, pull up thermal module to take it out.
Do not pull up at red block and note the thermal pipe should not have deformation.
1
Remove
4
1
3
2
Remove
There are some differences on Thermal Module between X1603 and M1603.
THERMAL MODULE
2
For X1603ZA
For M1603IA M1603QA
Screws
QTY
4
SCREW M2*2L (5,0.8) (K) #1
Torque(kgf-cm)
Spec
2.0 ± 0.2
21
Back
Advertisement
