Network Camera Reset Procedure-Default Settings - Panasonic KX-HCM270 Operating Instructions Manual
Network camera
Hide thumbs
Also See for KX-HCM270:
- Operating instructions manual (21 pages) ,
- Operating instrctions (136 pages)
Table of Contents
Advertisement
Operating Instructions
5.1 Network Camera Reset Procedure—Default
Settings
If the user forgets settings or passwords, Network Camera can be easily reset to
the default settings. The CLEAR SETTING button initializes all the parameters
except Date and Time setting.
With power on, press the CLEAR SETTING button for about one second.
Indicator changes such as Orange blinking twice –> Turning off about 15
seconds. Initializing takes about one minutes. Pan/Tilt motors will set to the home
position.
2)
Notes
•
Wireless network parameters, IP address and Subnet Mask will be also
set to factory default. Wireless network parameters must be
reconfigured.
•
When pressing the CLEAR SETTING button, all buffered images are
cleared.
•
Rubber Cap must be installed in the CLEAR SETTING button hole. It
protects the Network Camera's internal components from moisture
damage.
112
3)
1)
4)
CLEAR SETTING button
(Press the button with a
pointed object.)
Carefully insert the Rubber Cap into the
hole, gently pressing it into place using
the end of the long tool.
5)
6)
Put the Rubber
Cap back tightly
to prevent the
water from
getting in.
7)
Advertisement
Table of Contents
Troubleshooting
