Panasonic KX-HCM270 Operating Instructions Manual page 124
Network camera
Hide thumbs
Also See for KX-HCM270:
- Operating instructions manual (21 pages) ,
- Operating instrctions (136 pages)
Table of Contents
Advertisement
Operating Instructions
Problem
Wireless
communication
does not work.
Wired
communication
does not work.
Update
Firmware has
not finished.
124
About Network Camera Setup
•
Signal strength is weak. Change the location of Network
Camera or remove the obstacles around Network Camera.
•
SSID and Encryption setting of Network Camera are different
from those of the wireless router or the wireless LAN card of
PC. SSID and Encryption setting must be identical for Network
Camera and wireless router.
•
Remove the Ethernet cable and reconnect the AC adaptor for
Network Camera to recognize the Wireless Communication
mode.
Reconnect AC adaptor for Network Camera to recognize the
change from wireless to wired communication or vice versa.
When Update Firmware is interrupted by power off, or for network
troubles and other problems, follow the procedure below.
Enter the IP address on the web browser to access
Network Camera.
*
Refer to page 91 for the Update Firmware.
1
Cause and Remedy
Turn on Network Camera and the PC.
Top Page or Update
Firmware window?
Access Setup Page or Status window.
Check the Firmware Version Number.
Is the Version wished number?
Update Firmware is completed.
Update
Firmware
window
Top Page
Yes
Perform Update
Firmware*
No
1
.
Advertisement
Table of Contents
Troubleshooting
