Table of Contents
Advertisement
PROBLEM
The power
management button
does not work
START-UP PROBLEMS
The system displays an invalid configuration error message
at power on when there are the following conditions:
current configuration information doesn't match configu-
ration information stored in Auto Setup, such as when
an internal option is added or changed.
the system loses configuration information.
If either of these conditions is true, the system displays an
"invalid configuration information" message.
To continue start-up procedures, press
Setup to set current system parameters.
Troubleshooting
WHAT TO DO
Check that Power management isn't set to off on
the Preference toolbar.
Power management may be disabled in Auto
Setup.
A disk drive might be busy. Wait until the disk drive
stops and try again.
The docking station might be connected to the NEC
Versa 2205C. Some power management functions
do not work when the docking station is connected.
and run Auto
F1
Solving Problems 5-3
Advertisement
Table of Contents
