Table of Contents
Advertisement
MESSAGE
Fixed disk controller
failure
Keyboard clock line
failure
Keyboard data line
failure
Keyboard controller
failure
Keyboard stuck
key failure
IF YOU NEED ASSISTANCE
If you have a problem with your computer, first review the
checklist and troubleshooting table in the previous section.
If you still have a problem, call the NEC Technical Support
Center (TSC), toll free, at 1-800-632-4525 Direct technical
assistance is available 24 hours a day, seven days a week.
5-6 Solving Problems
POST Error Messages
WHAT TO DO
Press F1 to start Auto Setup. Exit and save to
update the parameters.
Turn off the system and check to see if the hard disk
is installed properly.
The hard disk controller may not work and might
need repair.
Unplug the external keyboard, if attached. Have the
external keyboard repaired.
Unplug the external keyboard, if attached. Have the
external keyboard repaired.
Unplug the external keyboard, if attached, and
reboot the system. If it still fails, have the external
keyboard repaired.
Repeated keystrokes during boot may
NOTE:
produce an error message.
A key is jammed. Remove any obstruction you find.
You may have repeatedly pressed the F1 key when
trying to enter Auto Setup.
If the error message remains, you may have to have
the keyboard repaired.
Advertisement
Table of Contents
