IBM LS42 - BladeCenter - 7902 Service Manual page 53
Problem determination and service guide
Hide thumbs
Also See for LS42 - BladeCenter - 7902:
- Installation and user manual (90 pages) ,
- Installation manual (56 pages)
Table of Contents
Advertisement
To remove a standard-form-factor expansion card, complete the following steps.
1. Read the safety information that begins on page "Safety statements" on page
viii and "Installation guidelines" on page 25.
2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing
the blade server from a BladeCenter unit" on page 27).
3. Remove the blade server cover (see "Removing the blade server cover" on page
29).
4. If you are removing the expansion card from the blade server and an MPE unit
or expansion unit is installed, remove the MPE unit (see "Removing an
expansion unit" on page 31).
5. Gently pivot the wide end of the card out of the expansion card connectors;
then, slide the notched end of the card out of the raised hook on the expansion
card bracket and lift the card out of the blade server.
6. If you are instructed to return the expansion card, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Removing a high-speed expansion card
The following illustration shows how to remove a high-speed expansion card from
the blade server; removing a high-speed expansion card from the MPE unit is
similar.
To remove a high-speed expansion card, complete the following steps.
1. Read the safety information that begins on page "Safety statements" on page
viii and "Installation guidelines" on page 25.
Chapter 4. Removing and replacing blade server components
41
Advertisement
Table of Contents
