Post Numeric Codes And Text Messages - HP 5850 - Deskjet Color Inkjet Printer Reference Manual
Business pc
Hide thumbs
Also See for 5850 - Deskjet Color Inkjet Printer:
- Support list (34 pages) ,
- Support telephone numbers (19 pages) ,
- Instructions manual (6 pages)
Table of Contents
Advertisement
POST Numeric Codes and Text Messages
This section covers those POST errors that have numeric codes associated with them. The section also
includes some text messages that may be encountered during POST.
NOTE:
The computer will beep once after a POST text message is displayed on the screen.
Table C-1
Numeric Codes and Text Messages
Control panel message
101-Option ROM Checksum Error
110-Out of Memory Space for Option ROMs
162-System Options Not Set
163-Time & Date Not Set
164-MemorySize Error
Description
System ROM or expansion board option
ROM checksum.
Recently added PCI expansion card contains
an option ROM too large to download during
POST.
Configuration incorrect.
RTC (real-time clock) battery may need to
be replaced.
Invalid time or date in configuration memory.
RTC (real-time clock) battery may need to
be replaced.
Memory amount has changed since the last
boot (memory added or removed).
Recommended action
1.
Verify the correct ROM.
2.
Flash the ROM if needed.
3.
If an expansion board was recently
added, remove it to see if the problem
remains.
4.
Clear CMOS.
5.
If the message disappears, there may
be a problem with the expansion card.
6.
Replace the system board.
1.
If a PCI expansion card was recently
added, remove it to see if the problem
remains.
2.
In Computer Setup, set Advanced >
Device Options > NIC PXE Option
ROM Download to DISABLE to prevent
PXE option ROM for the internal NIC
from being downloaded during POST to
free more memory for an expansion
card's option ROM. Internal PXE option
ROM is used for booting from the NIC to
a PXE server.
3.
Ensure the ACPI/USB Buffers @ Top of
Memory setting in Computer Setup is
enabled.
Run Computer Setup and check the
configuration in Advanced > Onboard
Devices.
Reset the date and time under Control
Panel. If the problem persists, replace the
RTC battery. See the Hardware Reference
Guide for instructions on installing a new
battery, or contact an authorized dealer or
reseller for RTC battery replacement.
Reset the date and time under Control
Panel (Computer Setup can also be used). If
the problem persists, replace the RTC
battery. See the Hardware Reference Guide
for instructions on installing a new battery, or
contact an authorized dealer or reseller for
RTC battery replacement.
Press the
F1
changes.
POST Numeric Codes and Text Messages 175
key to save the memory
Advertisement
Table of Contents
