Toshiba portege a600-s2201: user guide (219 pages)
Summary of Contents for Toshiba Portege ORACLER930A
Page 1
R930 Series User’s Guide If you need assistance: ❖ Technical support is available online at Toshiba’s Web site at support.toshiba.com At this Web site, you will find answers for many commonly asked technical questions plus many downloadable software drivers, BIOS updates, and other downloads.
Page 2
TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3
Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's ports.
Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Page 6
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 7
NOTE The above caution applies to products that operate with an 802.11a radio device. EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: Supplementary *The product complies with the Information: requirements of the Low Voltage Directive 73/23/EEC, the EMC Directive 89/336/EEC and/or the R&TTE Directive...
Page 8
This Directive applies to EU member countries only and does not apply to end users in other countries such as the United States. Although the initial emphasis is in Europe, Toshiba is already working with design engineers, suppliers, and other partners to determine appropriate worldwide product life cycle planning and end-of-life strategies for our products.
Page 9
2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.
FH: This equipment uses FH-SS modulation. The interference range of this equipment is less than 10m. This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850...
Page 11
Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 12
Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community 5150-5250 MHz 5250-5350 MHz 5470-5725 MHz Countries Channels: 36, 40, 44, Channels: 52, 56, 60, Channels: 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 Indoor Only Indoor Only Indoor/Outdoor...
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or support.toshiba.com in the United States for...
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
(Sample shown below. Location of the label and manufacturing information may vary.) Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 16
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL.
Page 17
Atheros is a registered trademark of Atheros Communications, Inc. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 18
Computer Recycling Information As part of a commitment to people and the future, Toshiba promotes the efficient use of resources by working to achieve our zero-waste-to-landfill goal at all our production sites. In addition to our existing waste reduction and recycling policies, Toshiba is strongly committed to reducing electronic waste.
Contents Introduction................26 This guide ...............28 Safety icons ............29 Other icons used..........29 Your computer’s features and specifications ..30 Other documentation ..........30 Service options ............30 Chapter 1: Getting Started............31 Selecting a place to work ........31 Setting up a work environment ......31 Keeping yourself comfortable ......32 Computer user comfort recommendations ..32 Good Working Posture ........32...
Page 20
Charging the main battery........42 Using the computer for the first time ......42 Initial setup ............43 Setting up your software........43 Registering your computer with Toshiba ....43 To Shut down your computer .........44 To Restart your computer ........44 To place your computer in Sleep mode....45 Adding optional external devices......46...
Page 21
Playing optical media ........81 Recording optical media ........81 Removing a disc with the computer on.....82 Removing a disc with the computer off ....82 Toshiba’s online resources ........83 Chapter 3: Mobile Computing........... 84 Toshiba’s energy-saver design........84 Running the computer on battery power ....85 Battery Notice ...........85...
Page 22
What to do when the main battery runs low ..90 Setting battery notifications ......90 Conserving battery power ........91 Power Plans............92 Using a TOSHIBA Function key to set the Power Plan..........93 Using the eco power plan ........94 Changing the main battery ........94 Removing the battery from the computer ..95...
Page 23
Cooling Performance Diagnostic Tool....130 PC Diagnostic Tool ..........131 PC Health Monitor..........132 Recovery Media Creator........133 Service Station............133 TOSHIBA Application Installer.......134 TOSHIBA Button Setting ........135 Trusted Platform Module (TPM) ......136 Fingerprint Utility ..........137 Fingerprint utility limitations ......137 Using the Fingerprint Utility ......137 Fingerprint Logon ...........138 Care and maintenance of your fingerprint reader ............138...
Page 24
Printer problems ...........159 Wireless networking problems......160 DVD operating problems........161 Develop good computing habits ......163 Data and system configuration backup in ® the Windows operating system....164 If you need further assistance.......168 Contacting Toshiba .........169 Other Toshiba Internet Web sites......169 Toshiba’s worldwide offices........170...
Page 25
Contents Appendix A: Function Keys............. 171 Functions ..............171 Lock (Instant security) ........172 Power plan............172 Sleep mode .............172 Hibernation mode ...........172 Output (Display switch) ........173 Display brightness ..........174 Disabling or enabling wireless devices....174 Disabling or enabling the touch pad....174 Cursor control overlay ........174 Numeric overlay..........175 Scroll lock ............175 Volume Mute ..........175...
You can wake the computer from Sleep mode by pressing the power button. See the “Mobile Computing” section of the Toshiba User’s Guide for more information on using power management settings to conserve computer energy.
Page 27
(RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its computer component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
Toshiba’s Web site at support.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice.
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at support.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page...
Chapter 1 Getting Started This chapter provides tips for using your computer effectively, summarizes how to connect components, and explains what to do the first time you use your computer. Please read the safety instruction information on the Quick Start document (that shipped with your computer) carefully and make sure you fully understand the instructions before you attempt to use your computer in order to avoid potential hazards that could cause...
Getting Started Selecting a place to work ❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones. ❖ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters.
Getting Started Selecting a place to work ❖ Avoid glare: position the notebook so that light sources (lamps or windows) do not shine or reflect directly into your eyes. Place the notebook display away from bright light sources or reduce the light intensity from windows by using blinds. Glare on the notebook display may cause eye strain, eye fatigue or headaches.
Getting Started Selecting a place to work ❖ Alternative keyboards, such as the split curved keyboard, may improve shoulder and arm comfort. ❖ Select a mouse that is comfortable for you to use. ❖ Don’t rest your wrists on the edge of the keyboard or on the work surface when typing.
Getting Started Selecting a place to work ❖ Take short, strategically spaced rest breaks to avoid eye strain and body fatigue. For example, stand up and walk around or stretch for a few minutes every hour. ❖ Taking regular breaks is especially important if you are working long hours on your computer or working on a deadline.
Getting Started Selecting a place to work For more specific recommendations on the safety and comfort of your computer environment, customers in the United States may visit the United States Department of Labor, Occupational Safety & Health Administration Web site at: osha.gov/SLTC/etools/computerworkstations/ Check list ❏...
Page 37
Getting Started Selecting a place to work Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury.
Getting Started Selecting a place to work ❖ Keep the computer and disks away from objects that generate strong magnetic fields, such as large stereo speakers. Information on some disks is stored magnetically. Placing a magnet too close to a disk can erase important files. Handle discs carefully.
Getting Started Setting up your computer Setting up your computer TECHNICAL NOTE: You must complete all setup steps up to and including “Setting up your software” on page 43 before adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, ®...
Page 40
TOSHIBA battery charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or battery charger could cause fire or damage to the computer, possibly resulting in serious injury.
Page 41
Getting Started Connecting to a power source Plug the AC adaptor cord into the DC-IN on the side of the computer. (Sample Illustration) Connecting the AC adaptor cord to the computer Connect the power cord/cable to a live electrical outlet. The AC power light on the indicator panel glows green.
Getting Started Charging the main battery Charging the main battery Before using the battery to power the computer, you must charge the battery. To charge the battery, leave the computer plugged into an AC power source with the computer turned off until the battery light glows green.
Product. Product registration can be completed by one of three methods: From the Toshiba Web site at register.toshiba.com: Type in the requested information and complete the registration process. From the Start screen: Type Registration while in the Start screen, locate and complete the registration process.
Getting Started To Shut down your computer To Shut down your computer From the Start or Desktop screen, move your pointer over the upper or lower right corner of the screen. ® When the Windows Charms appear, click the Settings ( Charm.
Getting Started To place your computer in Sleep mode In the lower right of the screen click the Power ( ) icon. Restart option Power (Sample Image) Restart Highlight Restart, and then click the Restart option. The computer closes all open applications, and restarts the operating system.
Adding optional external devices Adding optional external devices NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See “Setting up your software” on page After starting your computer for the first time you may want to: ❖...
Page 47
Getting Started Adding memory (optional) Installing a memory module with the computer’s power on may damage the computer, the module, or both. The computer has two memory slots—Slot A and Slot B. You can install one or two memory modules. Before you install or remove a memory module, turn off the computer, unplug the AC adaptor, and remove the battery.
Page 48
Getting Started Adding memory (optional) Highlight Shut down while holding the Shift key, and then click the Shut down option. The computer closes all open applications, shuts down the operating system, and then turns off. Unplug and remove any cables connected to the computer, including the AC adaptor.
Page 49
Getting Started Adding memory (optional) Remove the memory module slot cover. Place the screw(s) and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 50
Getting Started Adding memory (optional) aligning the connector’s notch with the matching key in the socket. notch latch connector latch (Sample Illustration) Aligning the memory module with the socket Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer).
Page 51
Getting Started Adding memory (optional) latch latch (Sample Illustration) Pressing down on the memory module Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place. Slot B Slot A (Sample Illustration) Inserting the memory module into the slot NOTE...
Getting Started Adding memory (optional) Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode).
Page 53
Getting Started Adding memory (optional) Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Sleep or Hibernation mode.
Getting Started Adding memory (optional) Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep mode).
Getting Started Recovering the Internal Storage Drive NOTE ® From time to time, Windows will display a pop-up that says, “Do you want to allow the following program to make changes to this computer?” This is a security feature to prevent programs or people from doing things on your computer without your permission.
Getting Started Recovering the Internal Storage Drive NOTE ❖ During the recovery process your computer must be connected to an external power source via the AC adaptor. ❖ When you restore your system, only the operating system files, applications, and drivers originally shipped with the computer are restored.
Page 57
Be sure to save the information stored on your external media to another storage device before executing this procedure, or use blank media. Click the Create button in the TOSHIBA Recovery Media Creator utility dialog box.
Getting Started Recovering the Internal Storage Drive Follow the on-screen prompts to complete the copy process. NOTE If you are copying the recovery files to DVDs, be sure to label each DVD in the set sequentially (for example, “1 of 3,” “2 of 3,” etc.), so that you will know in which order to insert the discs during recovery.
Refresh your PC (with user’s data) Using “Refresh your PC” recovers your internal storage drive to factory default state and attempts to save your data. Toshiba does not guarantee successful data back-up. Please make a complete back up of your data to external media before executing the recovery. For more information, see “Backing up your work”...
Page 60
Get Started. The “Refresh your PC” screen appears. (Sample Image) Refresh your PC screen Toshiba does not guarantee successful data back up. Be sure to save your work to external media before executing the recovery (see “Backing up your work” on page...
Getting Started Recovering the Internal Storage Drive Click the Next button to begin. The “Ready to refresh your PC” screen appears. (Sample Image) Ready to refresh your PC screen You will be prompted to refresh your system. Click the Refresh button. Your system will restart.
Page 62
Getting Started Recovering the Internal Storage Drive Click Change PC Settings. The PC settings window appears. (Sample Image) PC settings screen Click General. Scroll down to “Remove everything and reinstall Windows,” and click Get Started. The “Reset your PC” screen appears. (Sample Image) Reset your PC screen...
Page 63
Getting Started Recovering the Internal Storage Drive Click the Next button. The “Do you want to fully clean your drive” screen appears. (Sample Image) Do you want to fully clean your drive screen Select one of the following options: ❖ Just remove my files ❖...
NOTE Selecting the “Fully clean the drive” option may take several hours. Installing drivers and applications The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications:...
Getting Started Using the touch pad Using the touch pad NOTE Some of the touch pad operations described in this section are only supported in certain applications, and only on certain models. You can use the touch pad (the small, touch-sensitive area in front of the keyboard) and the adjacent control buttons to: ❖...
Page 66
Getting Started Using the touch pad Refer to the table below for specific instructions on performing each operation. NOTE The pointer is the icon (usually an arrow) that moves on the screen when you slide your finger across the touch pad or move a mouse connected to your computer.
Getting Started Using the touch pad Do the following: Example: Scroll vertically Slide your finger along the right edge of the touch pad in the direction you want to scroll. Repeat to scroll a longer distance. (Sample Illustration) Vertical scrolling active area Scroll horizontally Slide your finger along the bottom edge of...
Touch pad setting options vary by computer model. The touch pad settings are accessible through the Mouse Properties option of the Windows Control Panel. For more information, please visit support.toshiba.com. Disabling or enabling the touch pad The touch pad is enabled by default. To enable/disable the touch pad, do one of the following: ❖...
Getting Started Connecting an external device Connecting an external device NOTE Depending on your system, some models may include USB 3.0 port(s). To distinguish these ports, please look for the blue inset within the USB 3.0 port (if available). You can easily attach an external device your computer. To do this: Read the directions that came with the device to see if you first need to install new software.
Getting Started Using external display devices Connecting an HDMI™-compatible television or display device To connect an HDMI™-compatible television or display device to the computer: ❖ Connect one end of an HDMI™ cable (not included with your computer) to the HDMI™ Out port on the side of your computer, and then connect the other end of the cable to your television or display device.
Page 71
Getting Started Using external display devices The quickest way to change the display output settings is to use the keys: Press the ( keys repeatedly until the setting you want takes effect. Briefly pause each time you press the ( keys to allow time for the display to change.
Getting Started Customizing your computer’s settings Adjusting the quality of the external display To obtain the best picture quality from your television (or other video display device), you may need to adjust the video settings. See the video device documentation for additional configuration steps.
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object.
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the internal storage drive. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Learning the Basics Using the keyboard ❖ Back up your files to external media on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your internal storage drive suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Learning the Basics Using the keyboard Ctrl, Fn, and Alt keys (Sample Illustration) Ctrl, Fn, and Alt keys Ctrl , and keys do different things depending on the program you are using. For more information, see your program documentation. Function keys The function keys (not to be confused with the key) are the 12 keys at the top of the keyboard.
Learning the Basics Mouse properties Mouse properties Mouse properties allow you to change your pointing device or mouse settings. To access Mouse properties: Move your pointer over the upper or lower right corner of the ® screen. When the Windows Charms appear click the Search ) Charm, click Settings and, in the Search field, type Mouse.
Learning the Basics Saving your work Below is an example using the Search field to start an app: Move your pointer over the upper or lower right corner of the ® screen. When the Windows Charms appear click the Search ) Charm.
Learning the Basics Using the optical disc drive HINT: Backing up all the files on your internal storage drive may take a considerable amount of time and multiple CDs/DVDs. You may prefer to use a high-capacity file recovery system, such as an external hard drive.
Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in “Toshiba’s online resources” on page Place the disc carefully in the disc tray, label side up.
If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Due to manufacturing and quality variations in third party optical media (e.g., CD or DVD) or optical media players/recorders, in certain cases, your Toshiba optical disc drive may not record on certain optical media that bear the applicable logo, or play back optical media recorded by other computers or optical media recorders.
Gently press the tray in to close it. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been preset by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
® *Toshiba EasyGuard technology comprises a number of features some of which may or may not be available on a particular Toshiba computer depending on the model selected. See easyguard.toshiba.com for detailed information. Running the computer on battery power The computer contains a removable Lithium-Ion (Li-Ion) battery that provides power when you are away from an AC outlet.
Changes to these settings may result in system performance or stability issues. Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Customer Support Center. Using additional batteries...
Mobile Computing Running the computer on battery power Charging the main battery The battery needs to be charged before you can use it to power the computer. To charge the main battery while it is in your computer, plug the computer into a live electrical outlet.
Mobile Computing Monitoring main battery power Charging the RTC battery Your computer has an internal real-time clock (RTC) battery. The RTC battery powers the System Time Clock and BIOS memory used to store your computer’s configuration settings. When fully charged, it maintains this information for up to a month when the computer is powered off.
Mobile Computing Monitoring main battery power NOTE If the AC power light flashes amber during charging, either a battery pack is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the battery pack. “Changing the main battery”...
Mobile Computing Monitoring main battery power TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Mobile Computing Monitoring main battery power The Advanced settings tab of the Power Options window appears. Double-click Battery to display the battery options. (Sample Image) Advanced settings tab of Power Options screen Configure the alarm settings to suit your needs. Conserving battery power How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as:...
Mobile Computing Monitoring main battery power ® Microsoft has combined these options into preset Power Plans. Using one of these power plans lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs. The following sections describe how to choose a Power Plan and discuss each power-saving option.
The Balanced plan is a compromise between battery time and performance. Using a TOSHIBA Function key to set the Power Plan The Power Plan Notification function must be turned on, see “Function Key”...
Sleep mode takes effect is shortened. To enable or disable the eco power plan, press the eco ® Utility button. System control panel TOSHIBA Presentation or Wireless display button ® eco Utility button ®...
Mobile Computing Changing the main battery TECHNICAL NOTE: To avoid losing any data, save your files and then either completely shut down your computer or put it into Hibernation mode before changing the main battery. Removing the battery from the computer To remove the battery: Save your work.
Mobile Computing Changing the main battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations.
❖ If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com.
Mobile Computing Disposing of used batteries ❖ A reverse polarity condition should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity. ❖ Charge the battery only in the computer or in a battery charger designated as an approved option.
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs.
Page 100
Mobile Computing Traveling tips TECHNICAL NOTE: When traveling by air, you may be required to pass your computer through airport security equipment. The X-ray equipment will not harm your computer. NOTE Before using your computer aboard an aircraft, make sure the Wireless antenna is OFF (Airplane mode is ON).
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your computer. Exploring the Start screen The Start screen is the launching pad for everything you can do in ® the Windows operating system, providing new and easy ways to access everything from your favorite apps and Web sites to your contacts and other important information.
Exploring Your Computer’s Features Exploring the Start screen For detailed information on the new Windows 8 functionality, refer ® to the Windows Help and Support. App tiles ® (Sample Image) Windows Start screen Charms ® Use the Windows Charms to start apps, find documents, set up system components, and perform most other computing tasks.
Exploring Your Computer’s Features Exploring the desktop Tiles Tiles can be accessed and launched from the Start screen. Typical Start screen tiles are the Desktop tile and IE tile, as well as tiles representing all other applications downloaded to your system. Exploring the desktop You can use its features to start applications, find documents, set up system components, and perform most other computing tasks.
Page 104
Exploring Your Computer’s Features Exploring the desktop You may see various icons displayed on your system desktop, for example: Recycle Bin—Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. ❖ TECHNICAL NOTE: If you delete a large number of files or very large files from the internal storage drive, there may be insufficient space available in the Recycle Bin to hold these files.
Exploring Your Computer’s Features ® Windows Store To activate a specific task, click the appropriate Notification area icon. Notifications There are many types of notifications you can employ to help you with the many tasks you perform every day. User experience notifications can be set for toast, tile, badge, and raw notifications.
Exploring Your Computer’s Features Exploring audio features Using Wireless LAN connectivity NOTE Wireless connectivity and some features may require you to purchase additional software, external hardware or services. Availability of public wireless LAN access points may be limited. Your system comes with a wireless LAN module. This is a technology that expands wireless communication beyond networking equipment, and can connect many different kinds of electronic devices without the need for cables.
Exploring Your Computer’s Features Exploring audio features Recording sounds You may record sounds using the computer’s internal microphone or by connecting an optional external microphone. Using a microphone If you want to use an external microphone, connect it to the computer.
Exploring Your Computer’s Features Using the Web Camera To play back sound files through external speakers or headphones: Locate the headphone jack on the computer. Using any necessary adapters, plug the cable from the headphones or external speakers into the headphone jack. The headphone jack requires a 16-ohm stereo mini connector.
Exploring Your Computer’s Features ® Using an ExpressCard ® Using an ExpressCard (Available on certain models.) NOTE ® To locate your ExpressCard slot, refer to your Quick Start document. ® ® The ExpressCard slot supports the use of ExpressCard media. The slot also supports hot swapping, which allows you to replace ®...
Exploring Your Computer’s Features Using the Memory card reader then selecting the Safely Remove Hardware and Eject Media icon. Highlight and then click the item you would like to eject. If the system is unable to prepare the card for safe removal, a message will tell you to try again later.
Exploring Your Computer’s Features Using the Memory card reader Inserting memory media NOTE To locate your memory card reader, please refer to your Quick Start document. The following instructions apply to all types of supported media devices. Turn the media so that the contacts (metal areas) are face down. Push the media into the adapter until it locks in place.
Exploring Your Computer’s Features Using the eSATA/USB combo port Grasp the card and pull it straight out. (Sample Illustration) Removing memory media Do not remove memory media while data is being written or read. ® Even when the Windows message “copying...” disappears, writing to the media might still be in progress and your data could be destroyed.
To achieve a proper connection between your computer and the Port Replicator, your computer must be properly aligned with the Port Replicator. For more information, consult the user’s manual that came with your Port Replicator, or visit support.toshiba.com.
❖ Desktop Assist ❖ eco Utility® ❖ Supervisor Password ❖ User password ❖ System Settings ❖ Sleep and Charge ❖ Function Key ❖ PC Health Monitor ❖ Service Station ❖ TOSHIBA Application Installer ❖ HDD Protection Utility...
Utilities Desktop Assist ❖ TOSHIBA Button Setting ❖ Trusted Platform Module (TPM) ❖ Fingerprint Utility Desktop Assist The Desktop Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access Desktop Assist from the Start screen begin typing Desktop Assist, or while in the Desktop screen double-click the Desktop Assist icon.
Utilities Desktop Assist Media & Entertainment The feature available in this category is TOSHIBA Disc Player (Sample Image) Desktop Assist window – Media & Entertainment tab...
Utilities Desktop Assist Tools & Utilities The features that may be available in this category are: ❖ eco Utility® ❖ Fingerprint Utility ❖ HDD Protection Utility ❖ Supervisor Password ❖ System Settings ❖ Function Key ❖ User password (Sample Image) Desktop Assist window – Tools & Utilities tab NOTE The Function Key tab allows you to enable/disable notifications.
The features that may be available in this category are: ❖ Cooling Performance Diagnostic Tool ❖ PC Diagnostic Tool ❖ PC Health Monitor ❖ Recovery Media Creator ❖ Service Station ❖ TOSHIBA Application Installer ❖ User’s Guide (Sample Image) Desktop Assist window – Support & Recovery tab...
To activate the eco power plan, select eco Mode on the left side. Click the eco Mode button. Click Close. For more information on the TOSHIBA eco power plan and utility, click the Help button at the bottom of the window.
TOSHIBA is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 121
Utilities Setting passwords (Sample Image) Supervisor Password tab Click Set. Enter your password, and then enter it again to verify. Click Set. NOTE Under User Policy, this option may or may not ask for password verification. Click OK to save your password as a text file. Click Save.
Utilities System Settings System Settings System Settings is the TOSHIBA configuration management tool ® available through the Windows operating system. To access it: From the Start screen begin typing System Settings, or while in the Desktop screen double-click the Desktop Assist icon.
Page 124
Utilities System Settings ❖ HDD Protection—Allows you to enable or disable HDD Protection, which uses the acceleration sensor to detect vibrations, shocks, and other similar issues with the computer. When an issue is detected, HDD Protection automatically moves the HDD head to a safe position to reduce the risk of damage that may be caused by head-to-disk contact.
Utilities Sleep and Charge ❖ USB—Allows you to set conditions for USB, including Legacy USB Support, Internal USB 3.0 Controller, and System ON CDP Charge Mode ❖ SATA—Allows you to set conditions for SATA, including the eSATA port and SATA interface settings ❖...
Page 126
Utilities Sleep and Charge NOTE ❖ When “USB Sleep and Charge function” is set to Enabled, USB bus power (DC 5V) will be supplied to the compatible port even when the power of the computer is turned OFF. USB bus power (DC 5V) is similarly supplied to the external devices which are connected to the compatible ports.
Utilities Sleep and Charge Enabling/Disabling USB Sleep and Charge This utility can be used to enable or disable the USB Sleep and Charge function. To enable this function, select Enable. To disable this function, toggle the Enable button to the Disabled position. You can also control whether charging takes place when the computer is running on battery power.
Utilities HDD Protection Utility HDD Protection Utility The HDD Protection Utility controls your computer’s hard disk drive (HDD) protection feature, which parks the HDD whenever motion is detected on the computer. Using this utility, you can enable or disable hard disk drive (HDD) protection, and set the motion detector’s sensitivity level for AC power and battery power operation.
Utilities Function Key Function Key TOSHIBA Function Key enables functions that are activated when pressing specific keys or specific keys in combination with Some functions show the toast notification at the edge of the screen. These settings turn on/off notifications.
Utilities Cooling Performance Diagnostic Tool Cooling Performance Diagnostic Tool The Cooling Performance Diagnostic Tool is a utility that checks the cooling performance of the system to ensure the cooling fans are operating properly. To use the Cooling Performance Diagnostic Tool: From the Start screen begin typing Cooling Performance Diagnostic Tool, or while in the Desktop screen double-click the Desktop Assist icon.
Utilities PC Diagnostic Tool PC Diagnostic Tool This utility can help diagnose problems with devices in your computer. Refer to the online Help documentation within the application for additional help. NOTE The PC Diagnostic Tool utility may show tests for features you do not have.
This information is used to identify and provide a notification of system conditions that may affect the performance of your TOSHIBA computer. It may also be used to help diagnose problems should the computer require service by TOSHIBA or TOSHIBA's authorized service providers.
Utilities Recovery Media Creator Recovery Media Creator The Recovery Media Creator utility enables you to create recovery media that can be used to return your system to its out-of-box state, if necessary. For detailed information on using the utility to create recovery media, see “Creating recovery media”...
Utilities TOSHIBA Application Installer TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications: To access TOSHIBA Application Installer from the Start screen begin typing Application Installer, or while in the Desktop screen double-click the Desktop Assist icon.
Utilities TOSHIBA Button Setting TOSHIBA Button Setting TOSHIBA Button Setting allows you to customize the system control buttons. These buttons are located on the system control panel directly above the keyboard. To access TOSHIBA Button Setting: From the Desktop screen double-click the Desktop Assist icon.
Trusted Platform Module (TPM) NOTE This section only applies to systems with TPM. Your TOSHIBA computer includes the TPM (Trusted Platform Module), which is a security encryption device for your system’s internal storage drive. TPM is already included on your system, but needs to be installed and enabled using the following procedures.
TOSHIBA does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Utilities Fingerprint Utility Fingerprint Logon The fingerprint utility enables logon to your computer using fingerprints. During user enrollment, fingerprint samples are saved ® and associated with the user’s Windows user account. When the user attempts to log on again, the user’s fingerprint is read and compared with the user’s enrolled fingerprints;...
Page 139
Utilities Fingerprint Utility ❖ Avoid the following finger conditions for enrollment or recognition as they may result in fingerprint enrollment errors or a drop in the fingerprint recognition success rate. ❖ Soaked or swollen finger (e.g., after taking bath) ❖ Injured finger ❖...
TOSHIBA does not guarantee that the fingerprint reader will recognize the enrolled user or accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of this fingerprint recognition...
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
If Something Goes Wrong Problems when you turn on the computer Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working. If it does not, continue with the next step. Close the remaining programs one by one by selecting the program name, then End Task.
Page 143
If Something Goes Wrong Problems when you turn on the computer The computer displays the WARNING RESUME FAILURE/Windows Error message. Recovery – Windows did not shut down successfully To continue, select Start Windows normally. This can happen if the computer was put into Sleep mode and the battery has discharged.
The output specifications of the AC adaptor must match the input specifications of the computer. If the specifications do not match, locate and use the AC adaptor that shipped with your computer. If the specifications do match, contact Toshiba. See “Contacting Toshiba” on page 169.
If Something Goes Wrong ® The Windows operating system is not working ❖ The operating system responds differently from the normal routine. ❖ The screen does not look right. Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device.
Page 146
If Something Goes Wrong ® The Windows operating system is not working Advanced options Clicking this option presents you with another set of options: System Restore ❖ System Restore allows you to use a Restore point to return the computer to a state at which it was performing properly. Restore points are created: ❖...
If Something Goes Wrong ® The Windows operating system is not working ❖ Disable driver signature enforcement Allows drivers containing improper signatures to be installed ❖ Disable early-launch anti-malware protection Allows drivers to initialize without being measured by the Anti-malware driver ❖...
❖ Click one of the options listed in the window and follow the instructions You can connect to Support Online by going to Toshiba support at support.toshiba.com. Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device.
If Something Goes Wrong Memory problems ❖ The Driver tab, which displays the drivers being used by the device. This tab also provides options for updating the driver or rolling back the driver in case the new version is causing a problem. The tabs that appear in the dialog box vary from one device to another.
If Something Goes Wrong Power and the batteries NOTE For this model, Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A. Power and the batteries Your computer receives its power through the AC adaptor and power cord/cable or from the system batteries (battery and...
After a period of time, the battery will lose its ability to perform at maximum capacity and will need to be replaced. This is normal for all batteries. To purchase a new battery pack, see your accessories information included with your computer, or visit the Toshiba Web site at accessories.toshiba.com.
Page 152
If Something Goes Wrong Display problems You may have activated the instant password feature by pressing simultaneously. If you have registered a password, press any key, type the password and press . If no password is Enter registered, press any key. The screen reactivates and allows you to continue working.
If Something Goes Wrong Disk or storage drive problems Click Personalize, and then Display. Use the menu on the right hand side of the page to: ❖ Adjust resolution ❖ Adjust brightness ❖ Calibrate color ❖ Change display settings ❖ Project to a second screen ❖...
If Something Goes Wrong Disk or storage drive problems Error-checking NOTE This feature is not available for optical disc drives. Run Error-checking, which analyzes the directories and files on the storage drive and repairs any damage it finds. To run Error-checking: From the Start screen, type computer.
If Something Goes Wrong Optical disc drive problems Click the Check button. The Error Checking box appears. The system will alert you if you need to scan the drive. Even if you do not need to scan the drive for errors you can scan by clicking Scan drive.
Page 156
For more information regarding supported optical media formats, refer to the complete detail specifications for your computer an support.toshiba.com. If the problem is with an optical data disc, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
If Something Goes Wrong Sound system problems Sound system problems No sound is coming from the computer’s speakers. Adjust the volume control. Try pressing the key to see if volume mute is disabled. Check that the volume control on the computer is turned up. If you are using external headphones or speakers, check that they are securely connected to your computer.
If Something Goes Wrong ® ExpressCard problems ® Resolving ExpressCard problems Here are some common problems and their solutions: ® The slot appears to be dead. ExpressCards that used to work no longer work. ® Check the ExpressCard status: From the Start screen, type Device. The search feature appears.
If Something Goes Wrong Printer problems ® An ExpressCard error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section.
If Something Goes Wrong Wireless networking problems Wireless networking problems NOTE This section provides general troubleshooting tips for networking ® problems, specifically wireless (Wi-Fi ) networking. The terms and concepts used assume a basic understanding of networks, and may be for more advanced users. If you need assistance or if you are not familiar with the terminology, please see ®...
If Something Goes Wrong DVD operating problems ❖ Use IPCONFIG to verify that the computer has a useful IP address one other than the private address of ® 169.254.xxx.xxx assigned by Windows From the Start screen, type Click Command Prompt. Enter , and then press IPCONFIG/ALL...
Page 162
“Checking device properties” on page 148 for instructions on using Device Manager to view the optical disc drive properties. Check the Toshiba Web site for new information on optical disc drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
If Something Goes Wrong Develop good computing habits Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
If Something Goes Wrong Develop good computing habits ® Data and system configuration backup in the Windows operating system ® The Windows operating system offers some easy-to-use features ® for backing up your Windows settings and your data documents and other important files. Take advantage of these features to protect yourself from much more difficult and time-consuming restoration procedures, and to safeguard your valuable data from loss.
Page 165
An external hard drive is recommended in case the internal storage drive fails. No additional software is required. Most of the optical disc drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read...
Page 166
If Something Goes Wrong Develop good computing habits from optical discs. External optical disc writers are also widely available. Follow these steps to back up your computer or files to optical discs, or a storage drive: NOTE You cannot back up the computer while running on battery power. Connect the AC adaptor before continuing.
Page 167
If Something Goes Wrong Develop good computing habits ❖ ® Restart the Windows operating system. Always restart the ® Windows operating system after each installation, even if the installation utility does not prompt you to do so. This will ensure that the installation is completed, and will clean up anything that the installation utility left behind.
If you are attempting to charge a device without an AC adaptor connected to the computer, the computer's battery power may be below the limit specified in the TOSHIBA Sleep utility or the battery may be depleted. Lower the limit in the TOSHIBA...
Toshiba’s Technical Support Web site For technical support, or to stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at support.toshiba.com. Other Toshiba Internet Web sites toshiba.com...
Spain United States The Rest of Europe Toshiba America Information Toshiba Europe (I.E.) GmbH Systems, Inc. Hammfelddamm 8 9740 Irvine Boulevard D-4-1460 Neuss Irvine, California 92618 Germany United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm.
Appendix A Function Keys TOSHIBA Function keys provide a quick way to modify selected system functions and to launch applications. Functions TOSHIBA Function keys are used to set or modify the following system functions: ❖ Lock (Instant security) ❖ Power Plan ❖...
Power Options window (see “Power Plans” on page 92). This TOSHIBA function key also allows you to enable notifications for power plans. The notifications are disabled by default. Sleep mode This TOSHIBA Function key places the computer into Fn + Sleep mode.
Function Keys Functions Output (Display switch) This TOSHIBA Function key cycles through the display Fn + options and highlights the available options. (Only the first option is available when you do not have an external monitor attached.) ❖ PC screen only ❖...
Function Keys Functions Display brightness Fn + This TOSHIBA Function key decreases the screen brightness. This TOSHIBA Function key increases the screen Fn + brightness. Disabling or enabling wireless devices ® This TOSHIBA Function key enables/disables the Wi-Fi Fn + antenna in your computer.
When volume mute is enabled, no sound will come from the speakers or headphones. Optical disk drive This TOSHIBA Function key opens/closes the optical disk Fn + drive tray* on your computer. *Available on certain models.
Function Keys Functions Keyboard Function keys Fn + This TOSHIBA Function key allows you to zoom out. Fn + This TOSHIBA Function key allows you to zoom in. This TOSHIBA Function key decreases the speaker Fn + volume. This TOSHIBA Function key increases the speaker Fn + volume.
Appendix B Power Cord/Cable Connectors Your computer ships with the correct power supply for the country of purchase. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. Canada UL approved CSA approved United Kingdom Europe VDA approved...
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this User’s Guide. Alternating Current BIOS Basic Input/Output System BD-ROM Blu-ray Disc Read-Only Memory bits per second Compact Disc CD-ROM Compact Disc Read-Only Memory...
Page 179
Glossary DIMM Dual Inline Memory Module Disk Operating System Dots Per Inch Digital Versatile (or Video) Disc DVD-ROM Digital Versatile (or Video) Disc Read-Only Memory EPROM Erasable Programmable Read-Only Memory eSATA external Serial Advanced Technology Attachment File Allocation Table Federal Communications Commission gigabyte GBps gigabytes per second...
Page 180
Glossary Red, Green Blue light (monitor) Radio Frequency Interference Read-Only Memory Real-Time Clock Secure Digital SDRAM Synchronous Dynamic Random Access Memory Solid State Drive Thin Film Transistor Universal Serial Bus Uniform Resource Locator Wide Area Network World Wide Web Terms The following terms may appear in this User’s Guide.
Page 181
Glossary backup—A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. Basic Input/Output System (BIOS)—See BIOS. baud rate—The speed at which a communication device, such as a printer or modem, transmits information. Baud rate is the number of signal changes per second (not necessarily the same as bits per second).
Page 182
Glossary cache—A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD—An individual compact disc. See also CD-ROM. CD-ROM (Compact Disc Read-Only Memory)—A form of high- capacity storage that uses laser optics instead of magnetic means for reading data.
Page 183
Glossary CPU—See Central Processing Unit (CPU). CPU cache—A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache. cursor—An on-screen symbol (usually a flashing vertical line) that indicates the position where characters will appear when you enter data.
Page 184
Glossary disk drive—The device that reads and writes information and programs on external media or hard disk. It rotates the disk at high speed past one or more read/write heads. document—Any file created with an application and, if saved to disk, given a name by which it can be retrieved.
Page 185
Glossary file—A collection of related information, saved on disk with a unique name. A file may be a program, information used by a program, or a document. See also document. File Allocation Table (FAT)—The section of a storage drive that keeps track of the location of stored files.
Page 186
HDMI cables. See also HDMI. Hibernation—A feature of many Toshiba computers that saves to the internal storage drive the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 187
Glossary LAN (Local Area Network)—A group of computers or other devices dispersed over a relatively limited area and connected by a communications link that enables any device to interact with any other on the network. LED (Light Emitting Diode)—A solid state lamp (SSL) that uses light-emitting diodes (LEDs) as the source of light, which offers long life and high efficiency output.
Page 188
Glossary motherboard—The computer’s main circuit board that contains the processor, memory, and other primary components. MS-DOS prompt—See system prompt. multi-function drive—A DVD drive that can read and write to CD and DVD media. multimedia—A combination of two or more media, such as sound, animation, and video in a computer program or presentation.
Page 189
Glossary password—A unique string of characters entered by a user to verify his or her identity to the computer or the network. PC Card—A credit-card-sized expansion card designed to increase the capabilities of computers. PC Cards provide functions such as modem, fax/modem, hard disk drive, network adapter, sound card, or SCSI adapter.
Page 190
Glossary Random Access Memory—See RAM. Read-Only Memory—See ROM. reboot—See boot, restart. removable disk—A disk that can be removed from a disk drive. A Flash drive is one example of a removable disk. resolution—A measure of the sharpness of the images that can be produced by a printer or displayed on a screen.
Page 191
Glossary shortcut—See keyboard shortcut. ® Sleep—A feature of some Windows operating systems that allows you to turn off the computer without exiting your open applications and to continue from where you left off when you turn the computer on again. software—See program.
Page 192
Glossary utility—A computer program designed to perform a narrowly focused operation or solve a specific problem. Utilities are often related to computer system management. Web—See World Wide Web. ® Wi-Fi —A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components.
Index charging 42 charging the real-time clock AC adaptor 39 (RTC) 88 AC power 86 conserving power 91 AC power light 39 determine remaining power 89 accessing disposal 98 network 106 indicator light 89 adding installation 94 memory low charge 90 check total memory 54 maintaining 98 memory (optional) 46...
Page 194
97 power source 40 battery indicator light 89 cooling fan BIOS Setup adequate ventilation 38 see TOSHIBA Hardware Setup Cooling Performance Diagnostic Tool button eco Utility® 94 cursor control overlay eject, optical disc drive 80 TOSHIBA Function key 174...
Page 195
Utility® button 94 eject button headphones optical disc drive 80 using 107 eject, optical disc drive 80 Hibernation mode enabling TOSHIBA Function key 172 touch pad 68 eSATA icon troubleshooting 168 desktop 103 eSATA/USB combo port moving to desktop 103...
Page 196
106 Notification area 104 LEDs notifications 105 system indicator lights 89 numeric overlay AC adaptor light 88 TOSHIBA Function key 175 AC power light 39 battery light 41 Web Camera light 108 ON/OFF indicator light 89 Licenses 17 online resources...
Page 197
Startup options 145 safety precautions program, starting 77 battery 97 projector saving files 78 connecting 70 scroll lock TOSHIBA Function key 175 selecting real-time clock (RTC) a place to work 31 battery 86 power plan options 92 recording sounds 107...
Page 198
TOSHIBA Application Installer 134 Sleep & Charge 125 TOSHIBA Button Settings 135 Sleep mode Toshiba EasyGuard® 84 computer 45 TOSHIBA eco power plan 94 TOSHIBA Function key 172 TOSHIBA Function keys software cursor control overlay 174 Setup Wizard 43 disabling or enabling wireless...
Page 199
Zoom (Display resolution) 176 hard disk drive is slow 155 zoom in 176 high-pitched noise 157 zoom out 176 installing hardware/software 166 TOSHIBA HDD Protection Utility keyboard 151 keyboard will not respond 142 touch pad memory problems 149 control buttons 68...
Page 200
Index function key to set a power plan Memory card reader 110 optical disc drive 79 TOSHIBA eco power plan 94 touch pad 65 Web Camera 108 using the keyboard 75 Utilities 114 video projector adjusting display 72 warranty standard limited warranty 30...