Area Nssa Default-Info-Originate (Router Ospfv3 Config) - Dell Networking 7048 Reference Manual

Powerconnect 7000 series systems

Hide thumbs Also See for Networking 7048:

Default Configuration

If no metric is defined, 10 is the default configuration.

The default role is candidate.

Command Mode

Router OSPFv3 Configuration mode.

User Guidelines

This command has no user guidelines.

The following example configures not-so-stubby-area 10 as an NSSA.

console(config)#ipv6 router ospf

console(config-router)#area 10 nssa

The following example configures the metric value and type for the default

route advertised into the NSSA and configures the NSSA so that summary

LSAs are not advertised into the NSSA.

console(config-router)#area 20 nssa default-info-

originate metric 250 metric-type 2 no-summary

area nssa default-info-originate (Router OSPFv3

Use the area nssa default-info-originate command in Router OSPFv3

Configuration mode to configure the metric value and type for the default

route advertised into the NSSA. The optional metric parameter specifies the

metric of the default route. The metric type can be comparable (nssa-external

1) or noncomparable (nssa-external 2). Use the no form of the command to

return the metric value and type to the default value

nssa default-info-originate [

[comparable | non-

comparable]]

nssa default-info-originate

OSPFv3 Commands

Show Quick Links

Chapters