Table of Contents
Advertisement
Apply New Settings
Restart printer to apply new settings
*1
When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This uses much less energy,
but requires more warm-up time for the printer. Specify 1 minute if your printer shares an electrical circuit with room lighting and you
notice lights flickering.
Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to operate with minimum
warm-up time.
Select a value between 1 and 30 minutes for the power saver mode if you want a balance between energy consumption and a shorter
warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the computer. You can
also return the printer to the standby mode by pressing the
*2
Power Off Timer feature is available only in certain regions.
*3
This item is available only when the optional 550-sheet feeder is installed.
Maintenance
CAUTION:
Using a non-Dell toner cartridge may severely damage your printer. The warranty does not cover damages caused
by using non-Dell toner cartridges.
Purpose:
To configure the paper density, the color registration adjustments, the initialization of the printer, and other
settings.
Values:
Paper Density
Plain
Label
Color
Auto Correct
Registration
Adjustments
Print Color Regi Chart
Registration
Adjustments
154
Understanding the Tool Box Menus
(Power Saver) button on the operator panel.
Light
Normal
Light
Normal
LY(Left Yellow) Available Range:
-9 to +9
LM(Left
Available Range:
Magenta)
-9 to +9
LC(Left Cyan)
Available Range:
-9 to +9
RY(Right
Available Range:
Yellow)
-9 to +9
RM(Right
Available Range:
Magenta)
-9 to +9
RC(Right Cyan) Available Range:
-9 to +9
PY(Process
Available Range:
Yellow)
-9 to +9
PM(Process
Available Range:
Magenta)
-9 to +9
PC(Process
Available Range:
Cyan)
-9 to +9
After you change the settings, click this button to apply
the changes.
Click this button to apply the changes.
Sets plain paper density.
Sets label paper density.
Click Start to perform color registration
automatically.
Click Start to print a color registration chart.
Sets lateral (perpendicular to paper feed
direction) and process (paper feed direction) color
adjustment values that are found in the color
registration chart individually for Yellow, Magenta,
and Cyan.
- Quick Links:
- Error Codes
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
