Table of Contents
Advertisement
v SYSTEM_UPGRADE_CANCELED_BECAUSE_OF_NODE_FAILURE_
v FAILED_NOT_SUPPORTED_FOR_THIS_COMPONENT_TYPE
v HOT_UPGRADE_IS_NOT_ONGOING
v FIRMWARE_UPGRADE_IN_PROGRESS
v SYSTEM_IS_REDISTRIBUTING
v
v CANNOT_WRITE_TO_KEY_REPOSITORY
v KEYSERVER_COMMUNICATION_GENERIC_ERROR
v NO_MASTER_KEYSERVER_DEFINED
v NO_LIVE_KEYSERVER_GATEWAY_NODE
Phasing In a Component
Phases in a hardware component.
Parameters:
This command instructs the system to phase in a component. Components are
used by the system immediately. For disk and data modules, a process for copying
Troubleshooting: Check that all PSUs are properly wired, and ensure that none
is failed
DURING_UPGRADE
Last upgrade was canceled because a node failed while the upgrade process was
running
This component type cannot be failed
Hot upgrade is not currently ongoing
Firmware upgrade in progress
Troubleshooting: Contact support
Operation is not allowed during rebuild or phase-in
PHASEOUT_FOR_THIS_COMPONENT_IS_NOT_ALLOWED_ON_NON_
REDUNDANT_SYSTEM
Component cannot be phased-out while system is not redundant.
Troubleshooting: If relevant, please check partner component status and state.
Failed writing keys to the key repository.
Troubleshooting: Contact support.
Cannot connect to an active key server.
Troubleshooting: Invoke encrypt_key server_list and event_list for more details.
There is no master key server defined on the system.
Troubleshooting: Please define a master key server by invoking encrypt_key
server_update and retry.
There is no live key server gateway node on the system.
Troubleshooting: Please restart the key server gateway node and retry.
component_phasein component=ComponentId
Name
component
Description
Component to be phased in.
Chapter 20. Hardware Maintenance
Mandatory
Y
409
Hide quick links:
Advertisement
Chapters
Table of Contents
