Ram200 Memory Mezzanine Installation; Figure 3-1. Ram200 Placement On Mvme2700 - Motorola MVME2700 Series Installation And Use Manual
Mvme2700 series single board computer
Hide thumbs
Also See for MVME2700 Series:
- Reference manual (283 pages) ,
- Installation and use manual (215 pages)
Table of Contents
Advertisement
RAM200 Memory Mezzanine Installation
The RAM200 DRAM mezzanine mounts on top of the MVME2700 base
board. To upgrade or install a RAM200 mezzanine, refer to
proceed as follows:
1. Attach an ESD strap to your wrist. Attach the other end of the ESD
2. Perform an operating system shutdown. Turn the AC or DC power
3. Carefully remove the MVME2700 from its VMEbus card slot and
4. Place the RAM200 mezzanine module on top of the base board.
Figure 3-1. RAM200 Placement on MVME2700
http://www.mcg.mot.com/literature
strap to the chassis as a ground. The ESD strap must be secured to
your wrist and to ground throughout the procedure.
off and remove the AC cord or DC power lines from the system.
Remove chassis or system cover(s) as necessary for access to the
VMEmodules.
lay it flat, with connectors P1 and P2 facing you.
Connector J9 on the underside of the RAM200 should connect
smoothly with the corresponding connector J6 on the MVME2700.
RAM200 Memory Mezzanine Installation
Figure 3-1
and
11871.00 (1-3) 9710
3-3
3
Advertisement
Table of Contents
