Page 2
For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances. www.beko.com This product was manufactured using the latest technology in environmentally friendly conditions.
Disposing of the packaging ....8 Disposing of your old refrigerator ..8 7 Recommended solutions Replacing the interior light bulb ..9 for the problems Reversing the doors ......10 Reversing the doors ......11 8 Beko Customer Care...
Important Safety Warnings Please review the following informa- • Do not touch frozen food by hand; they may stick to your hand. tion. Failure to observe this information • Unplug your refrigerator before clean- may cause injuries or material damage. ing or defrosting.
Page 6
• Do not use mechanical devices • Avoid causing damage on power or other means to accelerate the cable when transporting the refrigera- defrosting process, other than those tor. Bending cable may cause fire. recommended by the manufacturer. Never place heavy objects on power •...
• If not to be used for a long time, refrigerator should be unplugged. • Things to be done for energy The plug’s tip should be regularly saving cleaned; otherwise, it may cause fire. • Do not leave the doors of your refrig- •...
Installation Please remember that the manufacturer shall not be held liable if the information given in the instruction manual is not observed. Points to be considered when re-transporting your refrigerator 1. Your refrigerator must be emptied and cleaned prior to any transportation.
Adjusting the foots Extension cables and multiway plugs must not be used for connection. If your refrigerator is unbalanced; A damaged power cable must be You can balance your refrigerator by replaced by a qualified electrician. turning the front foots of it as illustrated Product must not be operated before it in the figure.
Replacing the interior light bulb Should the light fail to work switch off at the socket outlet and pull out the mains plug. Follow the below instructions to check if the light bulb has worked itself loose. If the light still fails to work obtain a replacement E14 screw cap type 15 Watt (Max) bulb from your local electrical store and then fit it as...
Preparation Your refrigerator should be installed at least 30 cm away from heat sources such as hobs, ovens, central heater and stoves and at least 5 cm away from electrical ovens and should not be located under direct sunlight. The ambient temperature of the room where you install your refrigerator should at least be 10°C.
Using your refrigerator Fridge compartment temperature setting button Temperature button allows you to make the general temperature setting 5 4 3 of your refrigerator. Temperature button of the refrigerator controls both the temperature of the freezer compartment and the amount of the air send to the fridge compartment and thus, the temperature of the fridge compartment.
Freezer compartment • In low room temperatures, it temperature setting button is suggested to set the freezer compartment by setting the Freezer compartment setting button thermostat control to a position can be set to a position between between the Normal and Quick Normal and Quick Freezing.
Crisper humidity control Using the rotary crisper sliders some models) The crisper of your refrigerator which Using the crisper humidity control opens with a rotating movement is sliders designed specially to provide ease of Crisper of your refrigerator is designed usage and allow you to store more specially to keep your vegetables fresh vegetables and fruits (large volume)
Rotary storage container Sliding body shelf can be moved to left or right in order to allow you place long bottles, jars or boxes to a lower shelf (Fig. 1) You can reach the food that you have placed into the shelf by grabbing and turning it from its right edge (Fig.2).
Maintenance and cleaning A Never use gasoline, benzene or Protection of plastic similar substances for cleaning surfaces purposes. C Do not put the liquid oils or oil-cooked B We recommend that you unplug the meals in your refrigerator in unsealed appliance before cleaning.
Recommended solutions for the problems Please review this list before calling the service. It might save you time and money. This list includes frequent complaints that are not arising from defective workmanship or material usage. Some of the features described here may not exist in your product.
Page 20
• The ambient room temperature may be high.This is quite normal. • The refrigerator may have just been switched on. Allow sufficient cooling time. • Large amounts of hot food might have been put in the refrigerator recently. Hot food causes longer running of the refrigerator until they reach the safe storage temperature.
Page 21
• This noise is coming from the solenoid valve of the refrigerator. Solenoid valve functions for the purpose of ensuring coolant passage through the compartment which can be adjusted to cooling or freezing temperatures, and performing cooling functions. This is normal and is not fault cause. The operation noise increases when the refrigerator is running.
You are familiar with its normal mode of operation You have read the ‘Recommended solutions for the problems’ If after checking the points above, the problem still exists, please call our Beko Customer Care hotline as listed below:- If calling from Australia..