4.6 Speaker cover and Keyboard
4.6
Speaker Cover and Keyboard
Removing the Speaker Cover and Keyboard
Remove the Speaker Cover and Keyboard according to the following procedures and Figure
4-21, 4-22.
1. Release the following 8 latches on the switch cover, in that order:
- Two bottom latches
- One latch on the left and right sides
- Four front latches
2. Remove the speaker cover.
3. Remove two M2.5x2.6 black bind securing screw.
4. Remove the connector CN8 on main board and keyboard.
Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual
Figure 4-21 Removing the speaker cover
4 Replacement Procedures
4-33