4 Replacement Procedures
4.18 Switch Cover and Switch Board
Removing the Switch Cover and Switch Board
Remove the Switch Cover and Switch Board according to the following procedures and
Figure 4-42, 4-43.
1. Remove the following 6 latches on the switch cover, in that order:
-Three latches on each of the left and right sides
2. Disconnect the switch board flat cables from CN3002 on the switch board.
3. Remove two M2.5x4 black flat-head screws.
4. Remove the switch board.
4-60
Figure 4-42 Removing the switch cover
Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual
4.18 Switch Cover and Switch Board