Table of Contents
Advertisement
On screen messages
Message
All tuning data will be erased
Are you sure ?
Are you sure you want to delete this timer ?
Press OK to delete timer
Press RETURN to return
Bad Signal
Child Lock is active !
Press OK to enter PIN
Ethernet cable not connected
Faulty dish
Feature not available
Gateway does not answer.
Please confi rm connection and setting of
router.
Invalid operation - Please check settings
and connections
Invalid system time. Please exit !
IP address confl ict
IP address not set
Manual IP setting not correct
Max. number of Timers already set !
New DVB Service Found!
Press OK start Auto Setup
Press EXIT to ignore.
Selecting Auto Setup will delete
current Profi le and Childlock settings
New version 1.90 found.
Do you really want to update the
software and reboot the system ?
Press OK to download the new version
Press EXIT to ignore
No DVB Service found
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
No module inserted
No Recording - Check media
No Recording - Already recording
No Recording - Unknown reason
64
Meaning / Action
•
"Shipping Condition" will erase all tuning data (p. 42).
•
Confi rm correct operation.
•
Confi rm correct operation.
•
The signal is weak. Check the aerial.
•
The selected programme is locked in Child Lock (p. 41).
•
Check the connection of the LAN cable. If you use a hub, also check the
light on the hub is lit.
•
The satellite cable might be short-circuited or there might be connection
problems of the cable. Please check the cable and connection and then
turn the TV Off with the Mains power On / Off switch, and turn it On again.
•
It is not possible to record these sources (COMPONENT / HDMI / PC).
•
A connection failure has occurred and the gateway is not responding.
Check the settings and connections of the router.
•
Check the Q-Link or VIERA Link connection and setting (p. 50 - 52).
•
Cannot get the time information. Check the connection of the RF cable.
•
Duplicate IP address has been detected. Check the IP address of other
equipment such as computers, routers and ensure that there are no
duplicate IP address.
•
Please enter an IP address.
•
The system is unable to set the IP address. Please consult your Internet
Service Provider or telecommunications company.
•
The maximum number of timer programming events is 15.
•
There is a new DVB service or programme.
•
There is a new software available.
•
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
•
Check the CI module inserted completely (p. 36).
•
The tape or disc may be "write protected", missing or damaged.
•
The equipment may already be recording.
•
The recording may not be performed. Check the equipment.
•
Disc or tape may be full.
Hide quick links:
Advertisement
Chapters
Table of Contents
