Ms Lid Assembly Replacement - Sony HDW-750 Maintenance Manual

Hd camcorder

Hide thumbs Also See for HDW-750:

Table of Contents

6-12. MS Lid Assembly Replacement

1. Open the SW door of the inside panel

assembly in the direction of the arrow.

Remove the two set screws and remove the

two VR knobs (2).

Depending on the time of production at the

factory, the VR knob (2) is changed to what

has no stop screw.

2. Open the inside panel assembly.

(Refer to Section 1-5.)

3. Remove the screw and the FR flexible cable

Depending on the time of production at the

factory, some production units do not use the

FR flexible cable retainer.

4. Remove the three precision screws and

remove the shield plate.

5. Disconnect the flexible card wires from the

connectors (CN105 to CN107) on the MB-

Life of flexible card wire will be significantly

shortened if it is folded. Be very careful not

to fold the flexible card wire.

6. Disengage the hinge from the two hooks and

remove the inside panel assembly from the

Flexible card wires

FR flexible cable retainer

Shield plate

Inside panel

HDW-750/750CE V1

Hdw-750p Hdw-750ce Hdw-730