Table of Contents
Advertisement
PC Input Terminals connection
(Female)
Mini D-sub 15p
Notes:
• Computer signals which can be input are those with a horizontal scanning frequency of 30 to 110 kHz and vertical scanning
frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
• The display resolution is a maximum of 1,440 × 1,080 dots when the aspect mode is set to "4:3", and 1,920 × 1,080
dots when the aspect mode is set to "16:9". If the display resolution exceeds these maximums, it may not be possible
to show ne detail with suf cient clarity.
• The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will
need to make setting changes to the computer at the time of connection.
• Some PC models cannot be connected to the set.
• There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.
• The computer shown in the illustration is for example purposes only.
• Additional equipment and cables shown are not supplied with this set.
• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the speci ed
frequency range.
Signal Names for Mini D-sub 15P Connector
5
4
3
2
1
10
9
8
7
6
15 14 13 12 11
Pin Layout for PC Input
Terminal
(Male)
Shared with
DVI-D IN.
Stereo mini plug (M3)
Connect a cable which matches
the audio output terminal on the computer.
Pin No.
Signal Name
R
1
G
2
B
3
NC (not connected)
4
GND (Ground)
5
Conversion adapter
(if necessary)
Audio
Pin No.
Signal Name
GND (Ground)
6
GND (Ground)
7
GND (Ground)
8
+5 V DC
9
GND (Ground)
10
Connections
COMPUTER
Pin No.
Signal Name
NC (not connected)
11
SDA
12
HD/SYNC
13
VD
14
SCL
15
11
- Quick Links:
- Power on / off
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
