Table of Contents
Advertisement
Using Network Function
Command Control
Network function of the unit can control the unit in the same way as serial control from a network.
Supported commands
Commands used in the serial control are supported. (see page 12)
Note:
Consult your local Panasonic dealer for detail instructions on command usage.
PJLink™ Protocol
The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your
computer using PJLink™ protocol.
• Display setup
• Display status query
Supported commands
Commands to control the unit with PJLink™ protocol are shown in the table below.
Command
Control
POWR
Power control
POWR ?
Power status query
INPT
Input switch
INPT ?
Input switch query
AVMT
Shutter control
AVMT ?
Shutter control query
ERST ?
Error status query
LAMP ?
Lamp status query
INST ?
Input switch list query
NAME ?
Projector name query
INF1 ?
Manufacturer name query Returns "Panasonic"
INF2 ?
Model name query
INFO ?
Other information query
CLSS ?
Class information query
PJLink™ security authentication
Set "panasonic" for the PJLink™ password.
• PJLink™ is a pending trademark in Japan, the United States, and other countries or areas.
48
48
Parameter
0 = Standby 1 = Power "On"
Parameter
0 = Standby 1 = Power "On"
Parameter
See the parameter for command INST ?
Parameter
10 = Picture On (picture mute deactivated), 11 = Picture Off (picture on mute)
20 = Audio On (audio mute deactivated), 21 = Audio Off (audio on mute)
30 = Shutter mode Off (picture and audio mute deactivated)
31 = Shutter mode On (picture and audio on mute)
Parameter
11 = Picture Off (picture on mute)
21 = Audio Off (audio on mute)
30 = Shutter mode Off (picture and audio mute deactivated)
31 = Shutter mode On (picture and audio on mute)
Parameter
First byte: 0
Second byte: 0
Third byte: 0
Fourth byte: 0
Fifth byte: 0
Sixth byte: Means other error. 0 or 2.
Meaning of the 0 – 2 settings:
0 = Error is not detected, 2 = Error
Not supported
Parameter
11: PC IN input (PC)
32: HDMI2 input (HDMI2)
Return the Display name contents selected in "Network Setup".
Returns "65LFE7U"/"65LFE7E" (for 65-inch model)
Returns version number
Returns "1"
Remark
31: HDMI1 input (HDMI1)
32: DVI-D IN input (DVI)
- Quick Links:
- Power on / off
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
