Ip Local-Proxy-Arp; Ip Proxy-Arp - Dell Networking 2024 Reference Manual
Hide thumbs
Also See for Networking 2024:
- System information manual (273 pages) ,
- User manual (46 pages) ,
- System information manual (33 pages)
Table of Contents
Advertisement
ip local-proxy-arp
Use the ip local proxy-arp command in Interface Configuration mode to
enable proxying of ARP requests. This allows the switch to respond to ARP
requests within a subnet where routing is not enabled.
Syntax
ip local-proxy-arp
no ip local-proxy-arp
Default Configuration
Proxy arp is disabled by default.
Command Mode
Interface (VLAN) Configuration
User Guidelines
This command has no user guidelines.
ip proxy-arp
Use the ip proxy-arp command in Interface Configuration mode to enable
proxy ARP on a router interface. Without proxy ARP , a device only responds
to an ARP request if the target IP address is an address configured on the
interface where the ARP request arrived. With proxy ARP , the device may also
respond if the target IP address is reachable. The device only responds if all
next hops in its route to the destination are through interfaces other than the
interface that received the ARP request. Use the no form of the command to
disable proxy ARP on a router interface.
Syntax
ip proxy-arp
no ip proxy-arp
Default Configuration
Enabled is the default configuration.
928
ARP Commands
Advertisement
Chapters
Table of Contents
