SERVICE MANUAL
Ver 1.0 2002. 12
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
165 watts per channel minimum continuous average power into
4 ohms, both channels driven from 20 Hz to 20 kHz with no more
than 0.1% total harmonic distortion per Car Audio Ad Hoc
Committee standards.
Other Specifications
Circuit system
OTL (output transformerless) circuit
Pulse power supply
Inputs
RCA pin jacks
High level input connector
Outputs
Speaker terminals
Through out pin jacks
Suitable speaker impedance
2 – 8 Ω (stereo)
4 – 8 Ω (when used as a bridging amplifier)
Maximum outputs
330 W × 2 (at 4 Ω)
500 W × 2 (at 2 Ω)
1,000 W (monaural) at 4 Ω
Rated outputs (supply voltage at 14.4 V)
165 W × 2 (20 Hz – 20 kHz, 0.1% THD,
at 4 Ω)
200 W × 2 (20 Hz – 20 kHz, 0.15% THD,
at 2 Ω)
400 W (monaural) (20 Hz – 20 kHz, 0.15% THD,
at 4 Ω)
Frequency response
5 Hz – 50 kHz (
Input level adjustment range
0.3 – 6.0 V (RCA pin jacks)
1.2 – 12.0 V (High level input)
Sony Corporation
9-874-263-01
2002L0400-1
e Vehicle Company
© 2002. 12
Published by Sony Engineering Corporation
XM-2165GTX
SPECIFICATIONS
+0
dB)
–3
Low-pass filter
50 – 300 Hz, –12 dB/oct
Low boost
0 – 10 dB (40 Hz)
Power supply voltage
10.5 – 16 V
Current drain
at rated output : 42 A (at 4 Ω)
Remote input : 1 mA
Dimensions
Approx. 15
1/4
(387 × 55 × 260 mm)
(w/h/d) not incl. projecting parts and controls
Mass
Approx. 4.0 kg (8 lb. 14 oz.) not incl. accessories
Supplied accessories
Mounting screws (4)
High level input cord (1)
Protection cap (1)
Design and specifications are subject to change without
notice.
STEREO POWER AMPLIFIER
US Model
Canadian Model
AEP Model
UK Model
E Model
× 2
× 10
in.
1/4
1/4
1