Table of Contents
Advertisement
● The difference between "Blank" and "Space" is as follows.
Printings
[ . . A B . . CD . . ]
1
[ . . .
1 2 3 4
[ . . A B
2
[ . . .
1 2 3 4
. (Blank): Characters positioned after this mark will not be printed.
(Space) : A space will be handled as a character.
4
Printing method
● Two printing methods are selectable: "single scan" and "interlaced"
● A printing method will be automatically selected in accordance with the
print format setup.
● When making interlaced prints, perform the following setup.
(i) Ensure that the same print format is employed for all items.
(ii) Ensure that the same line count setting is employed for all columns.
(iii) The ink drop use percentage is 1/1 to 1/4.
Perform overall column setup. The format for the first item is then
applied to all the other items so as to provide interlaced setup. When
making a 1-line print, the single scan predominates even if you
perform steps (i) through (iii) .
The "Print specifications" second screen
Print specifications
Print start delay
[
0
0 5 0 ] (scanning unit SC 0-9999)
Repeat intervals
[ 0 0 0 0 ] (scanning unit SC 0-9999)
Repeat count
[ 0 0 0 0 ] (0:none, 1-9998, 9999:continuous)
1
2
3
4
5
5
Print start delay
● The printing start position can be specified.
● The print start delay can be specified either on an individual character basis
or on an individual scan basis.
● You should set the print start delay on an individual character basis and then
make fine adjustments on an individual scan basis.
● The positional relationship between the sensor and nozzle is as indicated
below.
When the nozzle is positioned before
the sensor
Sensor
c
a
0 0 2 3
b
Nozzle center
Print start delay=a-b (mm)
Character orientation 0
"ABC→" (left-justified)
A B
. . . ]
1 2 3 4
CD . . ]
A B
C D
. . . ]
1 2 3 4
Status: Ready
Show
cursor
Decre-
ment
Incre-
6
7
8
9
0
ment
When the nozzle is positioned after
the sensor
Direction of
transport
Print target
Nozzle center
Print start delay=a+b (mm)
● Setting Character Height and Character Orientation 3-34
Printing results
Character orientation 1
"ABC←" (right-justified)
A B
1 2 3 4
A B
C D
1 2 3 4
Shut
Manual
down
Prev.
Next
dis-
dis-
paly
paly
←
→
Unit Change
Back
Sensor
Direction of
c
transport
a
0 0 2 3
b
Print target
- Quick Links:
- Troubleshooting Guide
Hide quick links:
Advertisement
Table of Contents
